IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v10y2017i3p328-d92533.html
   My bibliography  Save this article

Optimized Design and Feasibility of a Heating System with Energy Storage by Pebble Bed in a Solar Attic

Author

Listed:
  • Hao Cheng

    (Department of Building Environment and Energy, Xi’an Jiaotong University, Xi’an 710049, China
    Shanxi Energy Broad Building Industry Co. Ltd., Xi’an 712085, China)

  • Xinke Wang

    (Department of Building Environment and Energy, Xi’an Jiaotong University, Xi’an 710049, China)

  • Min Zhou

    (China Northwest Architecture Design and Research Institute Co. Ltd., Xi’an, 710003, China)

Abstract

For efficient application of solar energy, a pebble bed energy storage heating system in a solar attic is optimally designed and operated. To study the characteristics of the heating system, a numerical model for the system is presented and is validated with the experiment data in the literature. Based on the model, the influence of the envelopes of the solar house and the meteorological condition on the system performance is investigated. The results show that the envelopes, except those on the north face, with more glazed exterior surfaces can be beneficial to raise the temperature of the solar house. It is also found that outdoor temperature may have less impact on the energy storage in the system compared with solar radiation. Furthermore, through optimizing the system design and operation, solar energy can account for 56% of the energy requirement in the heating season in Xi’an (about 34° N, 108° E), which has an average altitude of 397.5 m and moderate solar irradiation. Also, the suitability of the system in northwest China is investigated, and the outcome demonstrates that the external comprehensive temperature should be more than 269 K if a 50% energy saving rate is expected.

Suggested Citation

  • Hao Cheng & Xinke Wang & Min Zhou, 2017. "Optimized Design and Feasibility of a Heating System with Energy Storage by Pebble Bed in a Solar Attic," Energies, MDPI, vol. 10(3), pages 1-14, March.
    • Handle: RePEc:gam:jeners:v:10:y:2017:i:3:p:328-:d:92533
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/10/3/328/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/10/3/328/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Zhu, Jiayin & Chen, Bin, 2015. "Experimental study on thermal response of passive solar house with color changed," Renewable Energy, Elsevier, vol. 73(C), pages 55-61.
    2. Long, Linshuang & Ye, Hong & Liu, Minghou, 2016. "A new insight into opaque envelopes in a passive solar house: Properties and roles," Applied Energy, Elsevier, vol. 183(C), pages 685-699.
    3. Delmastro, Chiara & Mutani, Guglielmina & Corgnati, Stefano Paolo, 2016. "A supporting method for selecting cost-optimal energy retrofit policies for residential buildings at the urban scale," Energy Policy, Elsevier, vol. 99(C), pages 42-56.
    4. Chandel, S.S. & Aggarwal, R.K., 2008. "Performance evaluation of a passive solar building in Western Himalayas," Renewable Energy, Elsevier, vol. 33(10), pages 2166-2173.
    5. Maerefat, M. & Haghighi, A.P., 2010. "Passive cooling of buildings by using integrated earth to air heat exchanger and solar chimney," Renewable Energy, Elsevier, vol. 35(10), pages 2316-2324.
    6. Morrissey, J. & Moore, T. & Horne, R.E., 2011. "Affordable passive solar design in a temperate climate: An experiment in residential building orientation," Renewable Energy, Elsevier, vol. 36(2), pages 568-577.
    7. Xiao, Wei & Wang, Xin & Zhang, Yinping, 2009. "Analytical optimization of interior PCM for energy storage in a lightweight passive solar room," Applied Energy, Elsevier, vol. 86(10), pages 2013-2018, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Michel Noussan & Benedetto Nastasi, 2018. "Data Analysis of Heating Systems for Buildings—A Tool for Energy Planning, Policies and Systems Simulation," Energies, MDPI, vol. 11(1), pages 1-15, January.
    2. Nemś, Magdalena & Kasperski, Jacek & Nemś, Artur & Bać, Anna, 2018. "Validation of a new concept of a solar air heating system with a long-term granite storage bed for a single-family house," Applied Energy, Elsevier, vol. 215(C), pages 384-395.
    3. Roberto Zanetti Freire & Gerson Henrique dos Santos & Leandro dos Santos Coelho, 2017. "Hygrothermal Dynamic and Mould Growth Risk Predictions for Concrete Tiles by Using Least Squares Support Vector Machines," Energies, MDPI, vol. 10(8), pages 1-16, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, C. & Zhu, Y. & Qu, J. & Hu, H.D., 2018. "Automatic air temperature control in a container with an optic-variable wall," Applied Energy, Elsevier, vol. 224(C), pages 671-681.
    2. Soni, Suresh Kumar & Pandey, Mukesh & Bartaria, Vishvendra Nath, 2016. "Hybrid ground coupled heat exchanger systems for space heating/cooling applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 724-738.
    3. Gong, Qipeng & Kou, Fangcheng & Sun, Xiaoyu & Zou, Yu & Mo, Jinhan & Wang, Xin, 2022. "Towards zero energy buildings: A novel passive solar house integrated with flat gravity-assisted heat pipes," Applied Energy, Elsevier, vol. 306(PA).
    4. Wang, Cheng & Guo, Xiaofeng & Zhu, Ye, 2019. "Energy saving with Optic-Variable Wall for stable air temperature control," Energy, Elsevier, vol. 173(C), pages 38-47.
    5. Gao, Jiajia & Li, Anbang & Xu, Xinhua & Gang, Wenjie & Yan, Tian, 2018. "Ground heat exchangers: Applications, technology integration and potentials for zero energy buildings," Renewable Energy, Elsevier, vol. 128(PA), pages 337-349.
    6. Yong Zeng & Yanpeng Cai & Guohe Huang & Jing Dai, 2011. "A Review on Optimization Modeling of Energy Systems Planning and GHG Emission Mitigation under Uncertainty," Energies, MDPI, vol. 4(10), pages 1-33, October.
    7. Álvarez, Servando & Cabeza, Luisa F. & Ruiz-Pardo, Alvaro & Castell, Albert & Tenorio, José Antonio, 2013. "Building integration of PCM for natural cooling of buildings," Applied Energy, Elsevier, vol. 109(C), pages 514-522.
    8. Chi, Fang'ai & Zhang, Jianxun & Li, Gaomei & Zhu, Zongzhou & Bart, Dewancker, 2019. "An investigation of the impact of Building Azimuth on energy consumption in sizhai traditional dwellings," Energy, Elsevier, vol. 180(C), pages 594-614.
    9. Mirzazade Akbarpoor, Ali & Haghighi Poshtiri, Amin & Biglari, Faraz, 2021. "Performance analysis of domed roof integrated with earth-to-air heat exchanger system to meet thermal comfort conditions in buildings," Renewable Energy, Elsevier, vol. 168(C), pages 1265-1293.
    10. Rolka, Paulina & Przybylinski, Tomasz & Kwidzinski, Roman & Lackowski, Marcin, 2021. "The heat capacity of low-temperature phase change materials (PCM) applied in thermal energy storage systems," Renewable Energy, Elsevier, vol. 172(C), pages 541-550.
    11. Tharindu Prabatha & Kasun Hewage & Rehan Sadiq, 2023. "An Incentives Planning Framework for Residential Energy Retrofits: A Life Cycle Thinking-Based Analysis under Uncertainty," Sustainability, MDPI, vol. 15(6), pages 1-29, March.
    12. Dietz, Annelore & Vera, Sergio & Bustamante, Waldo & Flamant, Gilles, 2020. "Multi-objective optimization to balance thermal comfort and energy use in a mining camp located in the Andes Mountains at high altitude," Energy, Elsevier, vol. 199(C).
    13. DeBlois, Justin C. & Bilec, Melissa M. & Schaefer, Laura A., 2013. "Design and zonal building energy modeling of a roof integrated solar chimney," Renewable Energy, Elsevier, vol. 52(C), pages 241-250.
    14. Abednego Oscar Tanuwijava & Ching Jenq Ho & Chi-Ming Lai & Chao-Yang Huang, 2013. "Numerical Investigation of the Thermal Management Performance of MEPCM Modules for PV Applications," Energies, MDPI, vol. 6(8), pages 1-15, August.
    15. Borreguero, Ana M. & Luz Sánchez, M. & Valverde, José Luis & Carmona, Manuel & Rodríguez, Juan F., 2011. "Thermal testing and numerical simulation of gypsum wallboards incorporated with different PCMs content," Applied Energy, Elsevier, vol. 88(3), pages 930-937, March.
    16. Joulin, Annabelle & Younsi, Zohir & Zalewski, Laurent & Lassue, Stéphane & Rousse, Daniel R. & Cavrot, Jean-Paul, 2011. "Experimental and numerical investigation of a phase change material: Thermal-energy storage and release," Applied Energy, Elsevier, vol. 88(7), pages 2454-2462, July.
    17. Castaldo, Veronica Lucia & Pisello, Anna Laura & Piselli, Cristina & Fabiani, Claudia & Cotana, Franco & Santamouris, Mattheos, 2018. "How outdoor microclimate mitigation affects building thermal-energy performance: A new design-stage method for energy saving in residential near-zero energy settlements in Italy," Renewable Energy, Elsevier, vol. 127(C), pages 920-935.
    18. Zheng, Senlin & Qiu, Zining & He, Caiwei & Wang, Xianling & Wang, Xupeng & Wang, Zhangyuan & Zhao, Xudong & Shittu, Samson, 2022. "Research on heat transfer mechanism and performance of a novel adaptive enclosure structure based on micro-channel heat pipe," Energy, Elsevier, vol. 254(PB).
    19. Prieto, Alejandro & Knaack, Ulrich & Klein, Tillmann & Auer, Thomas, 2017. "25 Years of cooling research in office buildings: Review for the integration of cooling strategies into the building façade (1990–2014)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 71(C), pages 89-102.
    20. Yıldız, Ahmet & Ozgener, Onder & Ozgener, Leyla, 2012. "Energetic performance analysis of a solar photovoltaic cell (PV) assisted closed loop earth-to-air heat exchanger for solar greenhouse cooling: An experimental study for low energy architecture in Aeg," Renewable Energy, Elsevier, vol. 44(C), pages 281-287.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:10:y:2017:i:3:p:328-:d:92533. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.