IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v117y2009i1p197-211.html
   My bibliography  Save this article

Optimization analysis of supply chain scheduling in mass customization

Author

Listed:
  • Yao, Jianming
  • Liu, Liwen

Abstract

How to deal with the contradiction between scale production effect and customized demand is the key problem on studying mass customization (MC). When MC is operating in supply chain environment, on one hand, the excellent operating character of the supply chain will give conditions for solving this problem. On the other hand, it will bring out several complicated contradictions and increase the difficulties of the analysis and research on the supply chain operating and scheduling, so it is important to settle the contradictions. Based on our earlier work, the dominant contradictions of the supply chain scheduling in MC and the ways to relieve them are briefly summarized in this paper. A dynamic and multi-objective optimization mathematical model and the appropriate solving algorithm are set up by introducing these relieving methods into the operating process. It is pointed out that the characteristics of the model and algorithm cannot only reflect the unique operating requirements for this special production mode, but also merge with the thought of relieving the dominant contradictions. The feasibility of the model and algorithm in practical application to improve the scheduling efficiency and to settle the key problem mentioned above ultimately gets validated through the analysis of an application case we followed and through the algorithm simulation of a numerical scheduling case.

Suggested Citation

  • Yao, Jianming & Liu, Liwen, 2009. "Optimization analysis of supply chain scheduling in mass customization," International Journal of Production Economics, Elsevier, vol. 117(1), pages 197-211, January.
    • Handle: RePEc:eee:proeco:v:117:y:2009:i:1:p:197-211
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925-5273(08)00355-1
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Charles J. Corbett, 2001. "Stochastic Inventory Systems in a Supply Chain with Asymmetric Information: Cycle Stocks, Safety Stocks, and Consignment Stock," Operations Research, INFORMS, vol. 49(4), pages 487-500, August.
    2. Da Silveira, Giovani & Borenstein, Denis & Fogliatto, Flavio S., 2001. "Mass customization: Literature review and research directions," International Journal of Production Economics, Elsevier, vol. 72(1), pages 1-13, June.
    3. Li, Jian & Edwin Cheng, T.C. & Wang, Shouyang, 2007. "Analysis of postponement strategy for perishable items by EOQ-based models," International Journal of Production Economics, Elsevier, vol. 107(1), pages 31-38, May.
    4. Akkermans, Henk A. & Bogerd, Paul & Yucesan, Enver & van Wassenhove, Luk N., 2003. "The impact of ERP on supply chain management: Exploratory findings from a European Delphi study," European Journal of Operational Research, Elsevier, vol. 146(2), pages 284-301, April.
    5. Sabri, Ehap H. & Beamon, Benita M., 2000. "A multi-objective approach to simultaneous strategic and operational planning in supply chain design," Omega, Elsevier, vol. 28(5), pages 581-598, October.
    6. Lakhal, Salem & Martel, Alain & Kettani, Ossama & Oral, Muhittin, 2001. "On the optimization of supply chain networking decisions," European Journal of Operational Research, Elsevier, vol. 129(2), pages 259-270, March.
    7. Fogliatto, Flavio S. & da Silveira, Giovani J.C., 2008. "Mass customization: A method for market segmentation and choice menu design," International Journal of Production Economics, Elsevier, vol. 111(2), pages 606-622, February.
    8. Gérard P. Cachon, 1999. "Managing Supply Chain Demand Variability with Scheduled Ordering Policies," Management Science, INFORMS, vol. 45(6), pages 843-856, June.
    9. Biswas, S. & Narahari, Y., 2004. "Object oriented modeling and decision support for supply chains," European Journal of Operational Research, Elsevier, vol. 153(3), pages 704-726, March.
    10. Ma, Shihua & Wang, Wei & Liu, Liming, 2002. "Commonality and postponement in multistage assembly systems," European Journal of Operational Research, Elsevier, vol. 142(3), pages 523-538, November.
    11. Tyan, Jonah C. & Wang, Fu-Kwun & Du, Timon C., 2003. "An evaluation of freight consolidation policies in global third party logistics," Omega, Elsevier, vol. 31(1), pages 55-62, February.
    12. P Tormos & A Lova, 2001. "Tools for resource-constrained project scheduling and control: forward and backward slack analysis," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 52(7), pages 779-788, July.
    13. Sahin, Funda & Powell Robinson, E. & Gao, Li-Lian, 2008. "Master production scheduling policy and rolling schedules in a two-stage make-to-order supply chain," International Journal of Production Economics, Elsevier, vol. 115(2), pages 528-541, October.
    14. Ernst, Ricardo & Kamrad, Bardia, 2000. "Evaluation of supply chain structures through modularization and postponement," European Journal of Operational Research, Elsevier, vol. 124(3), pages 495-510, August.
    15. Turowski, Klaus, 2002. "Agent-based e-commerce in case of mass customization," International Journal of Production Economics, Elsevier, vol. 75(1-2), pages 69-81, January.
    16. MacCarthy, Bart & Brabazon, Philip G. & Bramham, Johanna, 2003. "Fundamental modes of operation for mass customization," International Journal of Production Economics, Elsevier, vol. 85(3), pages 289-304, September.
    17. Cochran, Jeffery K. & Marquez Uribe, Alberto, 2005. "A set covering formulation for agile capacity planning within supply chains," International Journal of Production Economics, Elsevier, vol. 95(2), pages 139-149, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liao, Kun & Deng, Xiaodong & Marsillac, Erika, 2013. "Factors that influence Chinese automotive suppliers’ mass customization capabilities," International Journal of Production Economics, Elsevier, vol. 146(1), pages 25-36.
    2. Yang, Rui & Tang, Wansheng & Dou, Mengdi & Zhang, Jianxiong, 2021. "Pricing and investing in co-creation with customers for a duopoly," International Journal of Production Economics, Elsevier, vol. 237(C).
    3. Liu, Weihua & Wang, Qian & Mao, Qiaomei & Wang, Shuqing & Zhu, Donglei, 2015. "A scheduling model of logistics service supply chain based on the mass customization service and uncertainty of FLSP’s operation time," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 83(C), pages 189-215.
    4. Hu, Xiaojian & Wang, Guanxiong & Li, Xiaozheng & Zhang, Yue & Feng, Shuai & Yang, Aifeng, 2018. "Joint decision model of supplier selection and order allocation for the mass customization of logistics services," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 120(C), pages 76-95.
    5. F. Tao & Y. Cheng & L. Zhang & A. Y. C. Nee, 2017. "Advanced manufacturing systems: socialization characteristics and trends," Journal of Intelligent Manufacturing, Springer, vol. 28(5), pages 1079-1094, June.
    6. Yeung, Wing-Kwan & Choi, Tsan-Ming & Cheng, T.C.E., 2011. "Supply chain scheduling and coordination with dual delivery modes and inventory storage cost," International Journal of Production Economics, Elsevier, vol. 132(2), pages 223-229, August.
    7. Jianming Yao, 2017. "Optimisation of one-stop delivery scheduling in online shopping based on the physical Internet," International Journal of Production Research, Taylor & Francis Journals, vol. 55(2), pages 358-376, January.
    8. Fogliatto, Flavio S. & da Silveira, Giovani J.C. & Borenstein, Denis, 2012. "The mass customization decade: An updated review of the literature," International Journal of Production Economics, Elsevier, vol. 138(1), pages 14-25.
    9. Weihua Liu & Yi Yang & Shuqing Wang & Enze Bai, 2017. "A scheduling model of logistics service supply chain based on the time windows of the FLSP’s operation and customer requirement," Annals of Operations Research, Springer, vol. 257(1), pages 183-206, October.
    10. Liu, Xiaotong & Zhang, Kai & Chen, Bokui & Zhou, Jun & Miao, Lixin, 2018. "Analysis of logistics service supply chain for the One Belt and One Road initiative of China," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 117(C), pages 23-39.
    11. Liu, Weihua & Liang, Zhicheng & Ye, Zi & Liu, Liang, 2016. "The optimal decision of customer order decoupling point for order insertion scheduling in logistics service supply chain," International Journal of Production Economics, Elsevier, vol. 175(C), pages 50-60.
    12. Huang, Rong-Hwa, 2010. "Multi-objective job-shop scheduling with lot-splitting production," International Journal of Production Economics, Elsevier, vol. 124(1), pages 206-213, March.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fogliatto, Flavio S. & da Silveira, Giovani J.C. & Borenstein, Denis, 2012. "The mass customization decade: An updated review of the literature," International Journal of Production Economics, Elsevier, vol. 138(1), pages 14-25.
    2. Laurent Lim, Lâm & Alpan, Gülgün & Penz, Bernard, 2014. "Reconciling sales and operations management with distant suppliers in the automotive industry: A simulation approach," International Journal of Production Economics, Elsevier, vol. 151(C), pages 20-36.
    3. Lyons, Andrew Charles & Um, Juneho & Sharifi, Hossein, 2020. "Product variety, customisation and business process performance: A mixed-methods approach to understanding their relationships," International Journal of Production Economics, Elsevier, vol. 221(C).
    4. Das, Kanchan, 2011. "Integrating effective flexibility measures into a strategic supply chain planning model," European Journal of Operational Research, Elsevier, vol. 211(1), pages 170-183, May.
    5. Sandrin, Enrico & Trentin, Alessio & Forza, Cipriano, 2018. "Leveraging high-involvement practices to develop mass customization capability: A contingent configurational perspective," International Journal of Production Economics, Elsevier, vol. 196(C), pages 335-345.
    6. Süleyman BARUTCU, 2007. "Customized Products: The Integrating Relationship Marketing, Agile Manufacturing And Supply Chain Management For Mass Customization," Ege Academic Review, Ege University Faculty of Economics and Administrative Sciences, vol. 7(2), pages 573-593.
    7. Trentin, Alessio & Perin, Elisa & Forza, Cipriano, 2012. "Product configurator impact on product quality," International Journal of Production Economics, Elsevier, vol. 135(2), pages 850-859.
    8. Gunasekaran, Angappa & Ngai, Eric W.T., 2009. "Modeling and analysis of build-to-order supply chains," European Journal of Operational Research, Elsevier, vol. 195(2), pages 319-334, June.
    9. Ngniatedema, Thomas & Fono, Louis Aimé & Mbondo, Georges Dieudonné, 2015. "A delayed product customization cost model with supplier delivery performance," European Journal of Operational Research, Elsevier, vol. 243(1), pages 109-119.
    10. Li, Jian & Edwin Cheng, T.C. & Wang, Shouyang, 2007. "Analysis of postponement strategy for perishable items by EOQ-based models," International Journal of Production Economics, Elsevier, vol. 107(1), pages 31-38, May.
    11. Cynthia dos Santos Hentschke & Carlos Torres Formoso & Marcia Elisa Echeveste, 2020. "A Customer Integration Framework for the Development of Mass Customised Housing Projects," Sustainability, MDPI, vol. 12(21), pages 1-26, October.
    12. Anzanello, Michel J. & Fogliatto, Flavio S., 2011. "Selecting the best clustering variables for grouping mass-customized products involving workers' learning," International Journal of Production Economics, Elsevier, vol. 130(2), pages 268-276, April.
    13. Zhang, Min & Zhao, Xiande & Qi, Yinan, 2014. "The effects of organizational flatness, coordination, and product modularity on mass customization capability," International Journal of Production Economics, Elsevier, vol. 158(C), pages 145-155.
    14. Giannikas, Vaggelis & McFarlane, Duncan, 2021. "Examining the value of flexible logistics offerings," European Journal of Operational Research, Elsevier, vol. 290(3), pages 968-981.
    15. Xiong, Yixuan & Du, Gang & Jiao, Roger J., 2018. "Modular product platforming with supply chain postponement decisions by leader-follower interactive optimization," International Journal of Production Economics, Elsevier, vol. 205(C), pages 272-286.
    16. Ngniatedema, Thomas & Shanker, Murali & Hu, Michael Y. & Guiffrida, Alfred L. & Eddy Patuwo, B., 2015. "Late customization strategy with service levels requirements," International Journal of Production Economics, Elsevier, vol. 166(C), pages 72-84.
    17. Kabak, Özgür & Ülengin, Füsun, 2011. "Possibilistic linear-programming approach for supply chain networking decisions," European Journal of Operational Research, Elsevier, vol. 209(3), pages 253-264, March.
    18. Afshin Mansouri, S. & Gallear, David & Askariazad, Mohammad H., 2012. "Decision support for build-to-order supply chain management through multiobjective optimization," International Journal of Production Economics, Elsevier, vol. 135(1), pages 24-36.
    19. Ng, Irene & Scharf, Kimberley & Pogrebna, Ganna & Maull, Roger, 2015. "Contextual variety, Internet-of-Things and the choice of tailoring over platform: Mass customisation strategy in supply chain management," International Journal of Production Economics, Elsevier, vol. 159(C), pages 76-87.
    20. Brun, Alessandro & Zorzini, Marta, 2009. "Evaluation of product customization strategies through modularization and postponement," International Journal of Production Economics, Elsevier, vol. 120(1), pages 205-220, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:117:y:2009:i:1:p:197-211. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.