IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v31y2006i2p260-277.html
   My bibliography  Save this article

Part load performance analysis of recuperated gas turbines considering engine configuration and operation strategy

Author

Listed:
  • Kim, T.S.
  • Hwang, S.H.

Abstract

The purpose of this study is to analyze the performance characteristics of recuperated gas turbines operating at part load conditions. Differences in part load performance, due to various factors in design and operation, have been investigated. Various part load operation strategies including simple (fuel only control), variable speed and variable inlet guide vane operations for the single-shaft configuration as well as simple and variable area nozzle operations for the two-shaft configuration were considered. Maintaining high turbine exhaust temperature (and thus, the recuperator inlet gas temperature) enhances the part load efficiency considerably. In particular, the variable speed operation of the single-shaft configuration provides the most efficient part load operation. For operations using variable geometry, such as the variable inlet guide vane operation and the variable area nozzle operation, care must be given to minimize the component efficiency degradation in order to fully utilize the advantages offered by higher turbine exhaust temperature. As the design turbine inlet temperature increases, the relative part load efficiency becomes higher. A higher design pressure ratio exhibits better part load efficiency characteristics.

Suggested Citation

  • Kim, T.S. & Hwang, S.H., 2006. "Part load performance analysis of recuperated gas turbines considering engine configuration and operation strategy," Energy, Elsevier, vol. 31(2), pages 260-277.
    • Handle: RePEc:eee:energy:v:31:y:2006:i:2:p:260-277
    DOI: 10.1016/j.energy.2005.01.014
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544205000150
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2005.01.014?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kim, T.S., 2004. "Comparative analysis on the part load performance of combined cycle plants considering design performance and power control strategy," Energy, Elsevier, vol. 29(1), pages 71-85.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Barelli, Linda & Ottaviano, Andrea, 2015. "Supercharged gas turbine combined cycle: An improvement in plant flexibility and efficiency," Energy, Elsevier, vol. 81(C), pages 615-626.
    2. Benitez, Liliana E. & Benitez, Pablo C. & van Kooten, G. Cornelis, 2008. "The economics of wind power with energy storage," Energy Economics, Elsevier, vol. 30(4), pages 1973-1989, July.
    3. Jesse Maddaloni & Andrew Rowe & G. Cornelis van Kooten, 2006. "Network Constrained Wind Integration: An Optimal Cost Approach," Working Papers 2006-05, University of Victoria, Department of Economics, Resource Economics and Policy Analysis Research Group.
    4. Francesco Gardumi & Manuel Welsch & Mark Howells & Emanuela Colombo, 2019. "Representation of Balancing Options for Variable Renewables in Long-Term Energy System Models: An Application to OSeMOSYS," Energies, MDPI, vol. 12(12), pages 1-22, June.
    5. Stanek, Wojciech & Mendecka, Barbara & Lombardi, Lidia & Simla, Tomasz, 2018. "Environmental assessment of wind turbine systems based on thermo-ecological cost," Energy, Elsevier, vol. 160(C), pages 341-348.
    6. Sun, Zhixin & Gao, Lin & Wang, Jiangfeng & Dai, Yiping, 2012. "Dynamic optimal design of a power generation system utilizing industrial waste heat considering parameter fluctuations of exhaust gas," Energy, Elsevier, vol. 44(1), pages 1035-1043.
    7. Ahn, Hyeunguk & Rim, Donghyun & Freihaut, James D., 2018. "Performance assessment of hybrid chiller systems for combined cooling, heating and power production," Applied Energy, Elsevier, vol. 225(C), pages 501-512.
    8. Verma, Aman & Olateju, Babatunde & Kumar, Amit, 2015. "Greenhouse gas abatement costs of hydrogen production from underground coal gasification," Energy, Elsevier, vol. 85(C), pages 556-568.
    9. Schenk, Niels J. & Moll, Henri C. & Potting, José & Benders, René M.J., 2007. "Wind energy, electricity, and hydrogen in the Netherlands," Energy, Elsevier, vol. 32(10), pages 1960-1971.
    10. Cebulla, F. & Fichter, T., 2017. "Merit order or unit-commitment: How does thermal power plant modeling affect storage demand in energy system models?," Renewable Energy, Elsevier, vol. 105(C), pages 117-132.
    11. Maddaloni, Jesse D. & Rowe, Andrew M. & van Kooten, G. Cornelis, 2009. "Wind integration into various generation mixtures," Renewable Energy, Elsevier, vol. 34(3), pages 807-814.
    12. Young-Kwang Park & Seong-Won Moon & Tong-Seop Kim, 2021. "Advanced Control to Improve the Ramp-Rate of a Gas Turbine: Optimization of Control Schedule," Energies, MDPI, vol. 14(23), pages 1-23, December.
    13. Brouwer, Anne Sjoerd & van den Broek, Machteld & Seebregts, Ad & Faaij, André, 2015. "Operational flexibility and economics of power plants in future low-carbon power systems," Applied Energy, Elsevier, vol. 156(C), pages 107-128.
    14. Maddaloni, Jesse D. & Rowe, Andrew M. & van Kooten, G. Cornelis, 2008. "Network constrained wind integration on Vancouver Island," Energy Policy, Elsevier, vol. 36(2), pages 591-602, February.
    15. Seong Won Moon & Tong Seop Kim, 2020. "Advanced Gas Turbine Control Logic Using Black Box Models for Enhancing Operational Flexibility and Stability," Energies, MDPI, vol. 13(21), pages 1-23, October.
    16. Buttler, Alexander & Kunze, Christian & Spliethoff, Hartmut, 2013. "IGCC–EPI: Decentralized concept of a highly load-flexible IGCC power plant for excess power integration," Applied Energy, Elsevier, vol. 104(C), pages 869-879.
    17. Brodrick, Philip G. & Brandt, Adam R. & Durlofsky, Louis J., 2017. "Operational optimization of an integrated solar combined cycle under practical time-dependent constraints," Energy, Elsevier, vol. 141(C), pages 1569-1584.
    18. Teichgraeber, Holger & Brodrick, Philip G. & Brandt, Adam R., 2017. "Optimal design and operations of a flexible oxyfuel natural gas plant," Energy, Elsevier, vol. 141(C), pages 506-518.
    19. Delattin, F. & De Ruyck, J. & Bram, S., 2009. "Detailed study of the impact of co-utilization of biomass in a natural gas combined cycle power plant through perturbation analysis," Applied Energy, Elsevier, vol. 86(5), pages 622-629, May.
    20. Brodrick, Philip G. & Kang, Charles A. & Brandt, Adam R. & Durlofsky, Louis J., 2015. "Optimization of carbon-capture-enabled coal-gas-solar power generation," Energy, Elsevier, vol. 79(C), pages 149-162.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:31:y:2006:i:2:p:260-277. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.