IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v356y2024ics0306261923018160.html
   My bibliography  Save this article

Impact of hydrogen metallurgy on the current iron and steel industry: A comprehensive material-exergy-emission flow analysis

Author

Listed:
  • Qiu, Ziyang
  • Sun, Jingchao
  • Du, Tao
  • Na, Hongming
  • Zhang, Lei
  • Yuan, Yuxing
  • Wang, Yisong

Abstract

The development of hydrogen metallurgy holds enormous significance in facilitating the low-carbon and environmentally sustainable transition of iron and steel industries. However, there is a lack of research on the impact of implementing hydrogen metallurgy on the downstream process and even the whole process. To fill this research gap, a model that considers specific internal reactions of steelmaking process was developed utilizing the bottom-up approach. Subsequently, by integrating the hydrogen metallurgy process with the traditional long process and short process, the energy intensity, exergy intensity and carbon emission intensity were quantitatively analyzed from multiple viewpoints. The results of the basic oxygen furnace (BOF) and electric arc furnace (EAF) exhibit a degree of similarity, with an increase in directly reduced iron (DRI) addition, resulting in an insufficient heat and an increase in process energy consumption, exergy loss, and carbon emissions. But there are also some subtle differences, such as oxygen consumption. Following the integration of hydrogen metallurgy, the energy intensity and exergy intensity of the BF-BOF process increase 11.984 kgce/t-CS and 3.083 × 102 MJ/t-CS, respectively. However, the carbon emission intensity decreased by 46.514 kg/t-CS. The integrated Chinese-style short process has the lowest carbon emission intensity of 879.664 kg/t-CS at 40% DRI and 60% scrap. Nevertheless, the energy intensity and exergy intensity have increased by 27.383 kgce/t-CS and 42.012 × 102 MJ/t-CS respectively compared to their initial values. It is noteworthy that the process of hydrogen production plays a significant role in mitigating the exergy intensity and carbon emission intensity.

Suggested Citation

  • Qiu, Ziyang & Sun, Jingchao & Du, Tao & Na, Hongming & Zhang, Lei & Yuan, Yuxing & Wang, Yisong, 2024. "Impact of hydrogen metallurgy on the current iron and steel industry: A comprehensive material-exergy-emission flow analysis," Applied Energy, Elsevier, vol. 356(C).
    • Handle: RePEc:eee:appene:v:356:y:2024:i:c:s0306261923018160
    DOI: 10.1016/j.apenergy.2023.122452
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261923018160
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2023.122452?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ziye Li & Yi Ge Zhang & Mark Torres & Benjamin J. W. Mills, 2023. "Neogene burial of organic carbon in the global ocean," Nature, Nature, vol. 613(7942), pages 90-95, January.
    2. Chakunnath Madhusudan & Ramasamy Panneerselvam, 2021. "Why have not minimills disrupted the Indian steel incumbents?," International Journal of Business Innovation and Research, Inderscience Enterprises Ltd, vol. 24(3), pages 364-384.
    3. Liu, Shuhan & Sun, Wenqiang, 2023. "Attention mechanism-aided data- and knowledge-driven soft sensors for predicting blast furnace gas generation," Energy, Elsevier, vol. 262(PA).
    4. Zhang, Hanxin & Sun, Wenqiang & Li, Weidong & Ma, Guangyu, 2022. "A carbon flow tracing and carbon accounting method for exploring CO2 emissions of the iron and steel industry: An integrated material–energy–carbon hub," Applied Energy, Elsevier, vol. 309(C).
    5. Xuan, Yanni & Yue, Qiang, 2017. "Scenario analysis on resource and environmental benefits of imported steel scrap for China’s steel industry," Resources, Conservation & Recycling, Elsevier, vol. 120(C), pages 186-198.
    6. Richard S.J. Tol, 2011. "The Social Cost of Carbon," Annual Review of Resource Economics, Annual Reviews, vol. 3(1), pages 419-443, October.
    7. Zhifu Mi & Yuning Gao & Hua Liao, 2023. "Carbon neutrality and socio-economic development," Journal of Chinese Economic and Business Studies, Taylor & Francis Journals, vol. 21(1), pages 1-3, January.
    8. Abhinav Bhaskar & Mohsen Assadi & Homam Nikpey Somehsaraei, 2020. "Decarbonization of the Iron and Steel Industry with Direct Reduction of Iron Ore with Green Hydrogen," Energies, MDPI, vol. 13(3), pages 1-23, February.
    9. Rocco, M.V. & Colombo, E. & Sciubba, E., 2014. "Advances in exergy analysis: a novel assessment of the Extended Exergy Accounting method," Applied Energy, Elsevier, vol. 113(C), pages 1405-1420.
    10. Ren, Ming & Lu, Pantao & Liu, Xiaorui & Hossain, M.S. & Fang, Yanru & Hanaoka, Tatsuya & O'Gallachoir, Brian & Glynn, James & Dai, Hancheng, 2021. "Decarbonizing China’s iron and steel industry from the supply and demand sides for carbon neutrality," Applied Energy, Elsevier, vol. 298(C).
    11. Guanyong Sun & Bin Li & Wensheng Yang & Jing Guo & Hanjie Guo, 2020. "Analysis of Energy Consumption of the Reduction of Fe 2 O 3 by Hydrogen and Carbon Monoxide Mixtures," Energies, MDPI, vol. 13(8), pages 1-13, April.
    12. Sun, Jingchao & Na, Hongming & Yan, Tianyi & Qiu, Ziyang & Yuan, Yuxing & He, Jianfei & Li, Yingnan & Wang, Yisong & Du, Tao, 2021. "A comprehensive assessment on material, exergy and emission networks for the integrated iron and steel industry," Energy, Elsevier, vol. 235(C).
    13. Qiu, Ziyang & Yue, Qiang & Yan, Tianyi & Wang, Qi & Sun, Jingchao & Yuan, Yuxing & Che, Zichang & Wang, Yisong & Du, Tao, 2023. "Gas utilization optimization and exergy analysis of hydrogen metallurgical shaft furnace," Energy, Elsevier, vol. 263(PC).
    14. Qiang Yue & Xicui Chai & Yujie Zhang & Qi Wang & Heming Wang & Feng Zhao & Wei Ji & Yuqi Lu, 2023. "Analysis of iron and steel production paths on the energy demand and carbon emission in China’s iron and steel industry," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 25(5), pages 4065-4085, May.
    15. Qiu, Ziyang & Du, Tao & Yue, Qiang & Na, Hongming & Sun, Jingchao & Yuan, Yuxing & Che, Zichang & Wang, Yisong & Li, Yingnan, 2023. "A multi-parameters evaluation on exergy for hydrogen metallurgy," Energy, Elsevier, vol. 281(C).
    16. ., 2023. "Shadow banking and carbon transition risk," Chapters, in: (Mis)managing Macroprudential Expectations, chapter 7, pages 128-144, Edward Elgar Publishing.
    17. Chen, Qianqian & Gu, Yu & Tang, Zhiyong & Wei, Wei & Sun, Yuhan, 2018. "Assessment of low-carbon iron and steel production with CO2 recycling and utilization technologies: A case study in China," Applied Energy, Elsevier, vol. 220(C), pages 192-207.
    18. Sun, Wenqiang & Wang, Qiang & Zhou, Yue & Wu, Jianzhong, 2020. "Material and energy flows of the iron and steel industry: Status quo, challenges and perspectives," Applied Energy, Elsevier, vol. 268(C).
    19. Na, Hong-ming & Gao, Cheng-kang & Tian, Ming-yan & Qi, Zhao-qian & Ye, Zhou, 2017. "MFA-based analysis of CO2 emissions from typical industry in urban — As a case of steel industry," Ecological Modelling, Elsevier, vol. 365(C), pages 45-54.
    20. Zhou, Chenyang & Zhang, Chen & Zhang, Teng & Zhang, Jingfeng & Ma, Pengfei & Yu, Yunsong & Zhang, Zaoxiao & Wang, Geoff G.X., 2023. "Single-atom solutions promote carbon dioxide capture," Applied Energy, Elsevier, vol. 332(C).
    21. Xiao, Zhaohua & Du, Limin & Wang, Zheng, 2023. "The Belt, the Road, and the carbon emissions in China," China Economic Review, Elsevier, vol. 78(C).
    22. Li, Feng & Chu, Mansheng & Tang, Jue & Liu, Zhenggen & Guo, Jun & Yan, Ruijun & Liu, Peijun, 2022. "Thermodynamic performance analysis and environmental impact assessment of an integrated system for hydrogen generation and steelmaking," Energy, Elsevier, vol. 241(C).
    23. Wang, Jiayang & Wang, Qiang & Sun, Wenqiang, 2023. "Quantifying flexibility provisions of the ladle furnace refining process as cuttable loads in the iron and steel industry," Applied Energy, Elsevier, vol. 342(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Hanxin & Sun, Wenqiang & Li, Weidong & Ma, Guangyu, 2022. "A carbon flow tracing and carbon accounting method for exploring CO2 emissions of the iron and steel industry: An integrated material–energy–carbon hub," Applied Energy, Elsevier, vol. 309(C).
    2. Ma, Shuaiyin & Huang, Yuming & Liu, Yang & Liu, Haizhou & Chen, Yanping & Wang, Jin & Xu, Jun, 2023. "Big data-driven correlation analysis based on clustering for energy-intensive manufacturing industries," Applied Energy, Elsevier, vol. 349(C).
    3. Sadiq, Muhammad & Alshehhi, Reem J. & Urs, Rahul Rajeevkumar & Mayyas, Ahmad T., 2023. "Techno-economic analysis of Green-H2@Scale production," Renewable Energy, Elsevier, vol. 219(P1).
    4. Sun, Jingchao & Na, Hongming & Yan, Tianyi & Che, Zichang & Qiu, Ziyang & Yuan, Yuxing & Li, Yingnan & Du, Tao & Song, Yanli & Fang, Xin, 2022. "Cost-benefit assessment of manufacturing system using comprehensive value flow analysis," Applied Energy, Elsevier, vol. 310(C).
    5. Yuan, Yuxing & Na, Hongming & Du, Tao & Qiu, Ziyang & Sun, Jingchao & Yan, Tianyi & Che, Zichang, 2023. "Multi-objective optimization and analysis of material and energy flows in a typical steel plant," Energy, Elsevier, vol. 263(PD).
    6. Ma, Shuaiyin & Ding, Wei & Liu, Yang & Ren, Shan & Yang, Haidong, 2022. "Digital twin and big data-driven sustainable smart manufacturing based on information management systems for energy-intensive industries," Applied Energy, Elsevier, vol. 326(C).
    7. Sun, Jingchao & Na, Hongming & Yan, Tianyi & Qiu, Ziyang & Yuan, Yuxing & He, Jianfei & Li, Yingnan & Wang, Yisong & Du, Tao, 2021. "A comprehensive assessment on material, exergy and emission networks for the integrated iron and steel industry," Energy, Elsevier, vol. 235(C).
    8. Wang, Xiaoyang & Yu, Biying & An, Runying & Sun, Feihu & Xu, Shuo, 2022. "An integrated analysis of China’s iron and steel industry towards carbon neutrality," Applied Energy, Elsevier, vol. 322(C).
    9. Shuangping Wu & Anjun Xu, 2021. "Calculation Method of Energy Saving in Process Engineering: A Case Study of Iron and Steel Production Process," Energies, MDPI, vol. 14(18), pages 1-15, September.
    10. Qiu, Ziyang & Du, Tao & Yue, Qiang & Na, Hongming & Sun, Jingchao & Yuan, Yuxing & Che, Zichang & Wang, Yisong & Li, Yingnan, 2023. "A multi-parameters evaluation on exergy for hydrogen metallurgy," Energy, Elsevier, vol. 281(C).
    11. Na, Hongming & Sun, Jingchao & Qiu, Ziyang & Yuan, Yuxing & Du, Tao, 2022. "Optimization of energy efficiency, energy consumption and CO2 emission in typical iron and steel manufacturing process," Energy, Elsevier, vol. 257(C).
    12. Ma, Shuaiyin & Huang, Yuming & Liu, Yang & Kong, Xianguang & Yin, Lei & Chen, Gaige, 2023. "Edge-cloud cooperation-driven smart and sustainable production for energy-intensive manufacturing industries," Applied Energy, Elsevier, vol. 337(C).
    13. Wang, Jiayang & Wang, Qiang & Sun, Wenqiang, 2023. "Quantifying flexibility provisions of the ladle furnace refining process as cuttable loads in the iron and steel industry," Applied Energy, Elsevier, vol. 342(C).
    14. Qiu, Ziyang & Yue, Qiang & Yan, Tianyi & Wang, Qi & Sun, Jingchao & Yuan, Yuxing & Che, Zichang & Wang, Yisong & Du, Tao, 2023. "Gas utilization optimization and exergy analysis of hydrogen metallurgical shaft furnace," Energy, Elsevier, vol. 263(PC).
    15. Yang, Honghua & Ma, Linwei & Li, Zheng, 2023. "Tracing China's steel use from steel flows in the production system to steel footprints in the consumption system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 172(C).
    16. Jiang, Sheng-Long & Wang, Meihong & Bogle, I. David L., 2023. "Plant-wide byproduct gas distribution under uncertainty in iron and steel industry via quantile forecasting and robust optimization," Applied Energy, Elsevier, vol. 350(C).
    17. Salvatore Digiesi & Giovanni Mummolo & Micaela Vitti, 2022. "Minimum Emissions Configuration of a Green Energy–Steel System: An Analytical Model," Energies, MDPI, vol. 15(9), pages 1-21, May.
    18. Liu, Shuhan & Sun, Wenqiang, 2023. "Attention mechanism-aided data- and knowledge-driven soft sensors for predicting blast furnace gas generation," Energy, Elsevier, vol. 262(PA).
    19. Fang Wan & Jizu Li & Yunfei Han & Xilong Yao, 2024. "Research of the Impact of Hydrogen Metallurgy Technology on the Reduction of the Chinese Steel Industry’s Carbon Dioxide Emissions," Sustainability, MDPI, vol. 16(5), pages 1-24, February.
    20. Zhang, Tong & Burke, Paul J. & Wang, Qi, 2024. "Effectiveness of electric vehicle subsidies in China: A three-dimensional panel study," Resource and Energy Economics, Elsevier, vol. 76(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:356:y:2024:i:c:s0306261923018160. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.