IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v355y2024ics0306261923017117.html
   My bibliography  Save this article

Hydrogen-rich carbon recycling complex system establishment and comprehensive evaluation

Author

Listed:
  • Zhang, Huining
  • Liu, Xueting
  • Wang, Pufan
  • Wang, Qiqi
  • Lu, Liping
  • Yang, Liang
  • Jiang, Pingguo
  • Liang, Yong
  • Liao, Chunfa

Abstract

Hydrogen-rich carbon recycling complex system coupling CO2 reduction with waste heat conversion efficiently is becoming a vigorous horizon stepping forward carbon peak and carbon neutrality with great strides in metallurgical industrial sectors. This article originally proposes an in-situ waste plastics gasification complex system utilizing blast furnace flue gas waste heat for hydrogen-rich preparation and CO2 reduction simultaneously, and the effect of parameters such as temperature, pressure, etc. on syngas yield, CO2 conversion rate, etc. are systemically discussed in detail, furthermore, the techno-economic analysis and priorities of this complex system are obtained through originally comparing intensifying factor and substitution coke ratio. The results show that waste plastics conversion rate, hydrogen and syngas yield have a positive relationship with temperature, but opposite with pressure. Hydrogen preparation is intensifying when water vapor is feeding into, and CO yield is augmented when flue gas is injected. The maximum H2 plus CO preparation efficiency is 61.3–77.4% and H2 yield is 95.9–135.5%,when pressure, temperature, H2O/P ratio and CO2/P ratio should be controlled in 1 bar, 800–1000 °C, 1.5–3.0 and 0.1–0.5, respectively, meanwhile, CO2 conversion rate is 28.4%.Otherwise, this complex system has a maximum CO2 reduction efficiency 73.6–99.0%, when 1 bar, 800–1000 °C, 0.1–0.2, 0.1–3.0 are adopted. Under the optimum conditions above, CO2 reduction efficiency is 171.1 kg/t for an ironmaking sector with capacity 54,000 tons, hydrogen preparation efficiency is 15.6 kg/t at 800 °C, corresponding coke ratio substitution amount is 460.0 kg/t. Besides, the maximum H2 preparation intensifying factor is 8.3% at 1000 °C and the maximum CO2 emission reduction intensity factor is 91.0%, which increases by 49.6–71.3% comparing to predecessors. Through this researches above, hydrogen-rich carbon recycling complex system has unique advantages for CO2 deep reduction and coke ratio decrease, and has a significant contribution suppling with a new horizon and methodology for low-carbon metallurgical process development in the future.

Suggested Citation

  • Zhang, Huining & Liu, Xueting & Wang, Pufan & Wang, Qiqi & Lu, Liping & Yang, Liang & Jiang, Pingguo & Liang, Yong & Liao, Chunfa, 2024. "Hydrogen-rich carbon recycling complex system establishment and comprehensive evaluation," Applied Energy, Elsevier, vol. 355(C).
    • Handle: RePEc:eee:appene:v:355:y:2024:i:c:s0306261923017117
    DOI: 10.1016/j.apenergy.2023.122347
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261923017117
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2023.122347?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sun, Yongqi & Seetharaman, Seshadri & Liu, Qianyi & Zhang, Zuotai & Liu, Lili & Wang, Xidong, 2016. "Integrated biomass gasification using the waste heat from hot slags: Control of syngas and polluting gas releases," Energy, Elsevier, vol. 114(C), pages 165-176.
    2. Lundgren, J. & Ekbom, T. & Hulteberg, C. & Larsson, M. & Grip, C.-E. & Nilsson, L. & Tunå, P., 2013. "Methanol production from steel-work off-gases and biomass based synthesis gas," Applied Energy, Elsevier, vol. 112(C), pages 431-439.
    3. Alexandra Devlin & Jannik Kossen & Haulwen Goldie-Jones & Aidong Yang, 2023. "Global green hydrogen-based steel opportunities surrounding high quality renewable energy and iron ore deposits," Nature Communications, Nature, vol. 14(1), pages 1-14, December.
    4. Kezia Megagita Gerby Langie & Kyungjae Tak & Changsoo Kim & Hee Won Lee & Kwangho Park & Dongjin Kim & Wonsang Jung & Chan Woo Lee & Hyung-Suk Oh & Dong Ki Lee & Jai Hyun Koh & Byoung Koun Min & Da Hy, 2022. "Toward economical application of carbon capture and utilization technology with near-zero carbon emission," Nature Communications, Nature, vol. 13(1), pages 1-10, December.
    5. Sicong Tian & Jianguo Jiang & Zuotai Zhang & Vasilije Manovic, 2018. "Inherent potential of steelmaking to contribute to decarbonisation targets via industrial carbon capture and storage," Nature Communications, Nature, vol. 9(1), pages 1-8, December.
    6. Zhang, Wei & Zhang, Juhua & Xue, Zhengliang, 2017. "Exergy analyses of the oxygen blast furnace with top gas recycling process," Energy, Elsevier, vol. 121(C), pages 135-146.
    7. Jin, Peng & Jiang, Zeyi & Bao, Cheng & Hao, Shiyu & Zhang, Xinxin, 2017. "The energy consumption and carbon emission of the integrated steel mill with oxygen blast furnace," Resources, Conservation & Recycling, Elsevier, vol. 117(PA), pages 58-65.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Huining & Dong, Jianping & Wei, Chao & Cao, Caifang & Zhang, Zuotai, 2022. "Future trend of terminal energy conservation in steelmaking plant: Integration of molten slag heat recovery-combustible gas preparation from waste plastics and CO2 emission reduction," Energy, Elsevier, vol. 239(PE).
    2. Suopajärvi, Hannu & Umeki, Kentaro & Mousa, Elsayed & Hedayati, Ali & Romar, Henrik & Kemppainen, Antti & Wang, Chuan & Phounglamcheik, Aekjuthon & Tuomikoski, Sari & Norberg, Nicklas & Andefors, Alf , 2018. "Use of biomass in integrated steelmaking – Status quo, future needs and comparison to other low-CO2 steel production technologies," Applied Energy, Elsevier, vol. 213(C), pages 384-407.
    3. Kang, Dongseong & Byun, Jaewon & Han, Jee-hoon, 2023. "Environmental impact analysis of steelmaking off-gases on methanol production," Energy, Elsevier, vol. 277(C).
    4. Li, Wei & Sun, Wen & Li, Guomin & Cui, Pengfei & Wu, Wen & Jin, Baihui, 2017. "Temporal and spatial heterogeneity of carbon intensity in China's construction industry," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 162-173.
    5. Hu, Mian & Laghari, Mahmood & Cui, Baihui & Xiao, Bo & Zhang, Beiping & Guo, Dabin, 2018. "Catalytic cracking of biomass tar over char supported nickel catalyst," Energy, Elsevier, vol. 145(C), pages 228-237.
    6. Huang, Jintao & Lyu, Sha & Han, He & Wang, Yanjiang & Sun, Haoyang & Su, Jingtao & Liu, Yidong & Min, Yonggang & Sun, Dazhi, 2022. "Enhanced looping biomass/vapour gasification utilizing waste heat from molten copper slags," Energy, Elsevier, vol. 252(C).
    7. Li, Yuan & Zhu, Lei, 2014. "Cost of energy saving and CO2 emissions reduction in China’s iron and steel sector," Applied Energy, Elsevier, vol. 130(C), pages 603-616.
    8. Michael Bampaou & Kyriakos Panopoulos & Panos Seferlis & Amaia Sasiain & Stephane Haag & Philipp Wolf-Zoellner & Markus Lehner & Leokadia Rog & Przemyslaw Rompalski & Sebastian Kolb & Nina Kieberger &, 2022. "Economic Evaluation of Renewable Hydrogen Integration into Steelworks for the Production of Methanol and Methane," Energies, MDPI, vol. 15(13), pages 1-26, June.
    9. Halliday, Cameron & Hatton, T. Alan, 2020. "The potential of molten metal oxide sorbents for carbon capture at high temperature: Conceptual design," Applied Energy, Elsevier, vol. 280(C).
    10. Uribe-Soto, Wilmar & Portha, Jean-François & Commenge, Jean-Marc & Falk, Laurent, 2017. "A review of thermochemical processes and technologies to use steelworks off-gases," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 809-823.
    11. Takuma Watari & André Cabrera Serrenho & Lukas Gast & Jonathan Cullen & Julian Allwood, 2023. "Feasible supply of steel and cement within a carbon budget is likely to fall short of expected global demand," Nature Communications, Nature, vol. 14(1), pages 1-10, December.
    12. Duan, Wenjun & Yu, Qingbo & Wang, Zhimei & Liu, Junxiang & Qin, Qin, 2018. "Life cycle and economic assessment of multi-stage blast furnace slag waste heat recovery system," Energy, Elsevier, vol. 142(C), pages 486-495.
    13. Bampaou, M. & Haag, S. & Kyriakides, A.-S. & Panopoulos, K.D. & Seferlis, P., 2023. "Optimizing methanol synthesis combining steelworks off-gases and renewable hydrogen," Renewable and Sustainable Energy Reviews, Elsevier, vol. 171(C).
    14. Wang, Wei-Cheng & Liu, Yu-Cheng & Nugroho, Rusdan Aditya Aji, 2022. "Techno-economic analysis of renewable jet fuel production: The comparison between Fischer-Tropsch synthesis and pyrolysis," Energy, Elsevier, vol. 239(PA).
    15. Andersson, Jim & Lundgren, Joakim, 2014. "Techno-economic analysis of ammonia production via integrated biomass gasification," Applied Energy, Elsevier, vol. 130(C), pages 484-490.
    16. Sun, Jingchao & Na, Hongming & Yan, Tianyi & Qiu, Ziyang & Yuan, Yuxing & He, Jianfei & Li, Yingnan & Wang, Yisong & Du, Tao, 2021. "A comprehensive assessment on material, exergy and emission networks for the integrated iron and steel industry," Energy, Elsevier, vol. 235(C).
    17. Wang, Peng & Zhao, Shen & Dai, Tao & Peng, Kun & Zhang, Qi & Li, Jiashuo & Chen, Wei-Qiang, 2022. "Regional disparities in steel production and restrictions to progress on global decarbonization: A cross-national analysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    18. Holmgren, Kristina M. & Berntsson, Thore S. & Andersson, Eva & Rydberg, Tomas, 2016. "Comparison of integration options for gasification-based biofuel production systems – Economic and greenhouse gas emission implications," Energy, Elsevier, vol. 111(C), pages 272-294.
    19. Bao Wang & Yujie Li & Jianan Zhou & Yi Wang & Xun Tao & Xiang Zhang & Weiming Song, 2021. "Thermogravimetric and Kinetic Analysis of High-Temperature Thermal Conversion of Pine Wood Sawdust under CO 2 /Ar," Energies, MDPI, vol. 14(17), pages 1-16, August.
    20. Xiang, Yangyang & Zhou, Jingsong & Lin, Bowen & Xue, Xiaoao & Tian, Xingtao & Luo, Zhongyang, 2015. "Exergetic evaluation of renewable light olefins production from biomass via synthetic methanol," Applied Energy, Elsevier, vol. 157(C), pages 499-507.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:355:y:2024:i:c:s0306261923017117. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.