IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v165y2016icp639-647.html
   My bibliography  Save this article

In-plane nonuniform temperature effects on the performance of a large-format lithium-ion pouch cell

Author

Listed:
  • Klein, M.
  • Tong, S.
  • Park, J.W.

Abstract

Due to the temperature sensitive behavior of lithium-ion batteries a thermal management system (TMS) is typically integrated into the battery pack design. This system plays a crucial role in the total battery pack performance. During operation the TMS will induce nonuniform temperature distributions within the cells of the pack, due to relatively low cell thermal conductivity. However, limited research has been published regarding the effects of thermal nonuniformity throughout a cell, module, or pack. Understanding these effects will be beneficial to heat exchanger design and TMS control strategy optimization. Here, an experimental investigation is performed where fixed one-dimensional temperature distributions, emulating the effects of edge-based heat transfer, are applied across the face of a 10Ah NiCoMn Li-ion pouch cell. Average cell temperature conditions of 15, 25, and 35°C with edge-to-edge temperature differences (ΔT) of 0, 5, 10, and 20°C are applied. At each thermal treatment the effects on: (1) the pulse resistance at 50% state of charge, (2) the bulk resistance on a Charge-Depleting US06 power profile, and (3) the overpotential during Constant-Current charge are investigated. Pulse resistance is decreased with increased ΔT. However, the discharge resistance on the Charge-Depleting cycle was increased with increased ΔT. The Constant-Current charging overpotential (and therefore resistance) was also increased with increased ΔT. All effects are largest at 15°C, and negligible at 35°C.

Suggested Citation

  • Klein, M. & Tong, S. & Park, J.W., 2016. "In-plane nonuniform temperature effects on the performance of a large-format lithium-ion pouch cell," Applied Energy, Elsevier, vol. 165(C), pages 639-647.
  • Handle: RePEc:eee:appene:v:165:y:2016:i:c:p:639-647
    DOI: 10.1016/j.apenergy.2015.11.090
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261915015408
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2015.11.090?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liu, Rui & Chen, Jixin & Xun, Jingzhi & Jiao, Kui & Du, Qing, 2014. "Numerical investigation of thermal behaviors in lithium-ion battery stack discharge," Applied Energy, Elsevier, vol. 132(C), pages 288-297.
    2. Wang, Tao & Tseng, K.J. & Zhao, Jiyun & Wei, Zhongbao, 2014. "Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies," Applied Energy, Elsevier, vol. 134(C), pages 229-238.
    3. Polterovich, Victor & Popov, Vladimir, 2006. "Эволюционная Теория Экономической Политики: Часть I: Опыт Быстрого Развития [An Evolutionary Theory of Economic Policy: Part I: The Experience of Fast Development]," MPRA Paper 22168, University Library of Munich, Germany.
    4. Saw, L.H. & Ye, Y. & Tay, A.A.O., 2014. "Electro-thermal analysis and integration issues of lithium ion battery for electric vehicles," Applied Energy, Elsevier, vol. 131(C), pages 97-107.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chang, Chun & Wu, Yutong & Jiang, Jiuchun & Jiang, Yan & Tian, Aina & Li, Taiyu & Gao, Yang, 2022. "Prognostics of the state of health for lithium-ion battery packs in energy storage applications," Energy, Elsevier, vol. 239(PB).
    2. Zhang, Caiping & Jiang, Yan & Jiang, Jiuchun & Cheng, Gong & Diao, Weiping & Zhang, Weige, 2017. "Study on battery pack consistency evolutions and equilibrium diagnosis for serial- connected lithium-ion batteries," Applied Energy, Elsevier, vol. 207(C), pages 510-519.
    3. Yang, Yang & Yuan, Wei & Zhang, Xiaoqing & Yuan, Yuhang & Wang, Chun & Ye, Yintong & Huang, Yao & Qiu, Zhiqiang & Tang, Yong, 2020. "Overview on the applications of three-dimensional printing for rechargeable lithium-ion batteries," Applied Energy, Elsevier, vol. 257(C).
    4. Xu, Xinhai & Li, Wenzheng & Xu, Ben & Qin, Jiang, 2019. "Numerical study on a water cooling system for prismatic LiFePO4 batteries at abused operating conditions," Applied Energy, Elsevier, vol. 250(C), pages 404-412.
    5. Cha, Kyoung-Soo & Kim, Dong-Min & Jung, Young-Hoon & Lim, Myung-Seop, 2020. "Wound field synchronous motor with hybrid circuit for neighborhood electric vehicle traction improving fuel economy," Applied Energy, Elsevier, vol. 263(C).
    6. Kim, Dong-Min & Lee, Soo-Gyung & Kim, Dae-Kee & Park, Min-Ro & Lim, Myung-Seop, 2022. "Sizing and optimization process of hybrid electric propulsion system for heavy-duty vehicle based on Gaussian process modeling considering traction motor characteristics," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    7. Peizheng Li & Jiapei Zhao & Shuai Zhou & Jiabin Duan & Xinke Li & Houcheng Zhang & Jinliang Yuan, 2023. "Design and Optimization of a Liquid Cooling Thermal Management System with Flow Distributors and Spiral Channel Cooling Plates for Lithium-Ion Batteries," Energies, MDPI, vol. 16(5), pages 1-23, February.
    8. Li, Shen & Marzook, Mohamed Waseem & Zhang, Cheng & Offer, Gregory J. & Marinescu, Monica, 2023. "How to enable large format 4680 cylindrical lithium-ion batteries," Applied Energy, Elsevier, vol. 349(C).
    9. Yashraj Tripathy & Andrew McGordon & Chee Tong John Low, 2018. "A New Consideration for Validating Battery Performance at Low Ambient Temperatures," Energies, MDPI, vol. 11(9), pages 1-16, September.
    10. Jiang, Yan & Jiang, Jiuchun & Zhang, Caiping & Zhang, Weige & Gao, Yang & Mi, Chris, 2019. "A Copula-based battery pack consistency modeling method and its application on the energy utilization efficiency estimation," Energy, Elsevier, vol. 189(C).
    11. Basu, Suman & Hariharan, Krishnan S. & Kolake, Subramanya Mayya & Song, Taewon & Sohn, Dong Kee & Yeo, Taejung, 2016. "Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system," Applied Energy, Elsevier, vol. 181(C), pages 1-13.
    12. Wu, Nan & Ye, Xiaolin & Li, Junjie & Lin, Boshen & Zhou, Xuelong & Yu, Bin, 2021. "Passive thermal management systems employing hydrogel for the large-format lithium-ion cell: A systematic study," Energy, Elsevier, vol. 231(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Oh, Ki-Yong & Epureanu, Bogdan I., 2016. "Characterization and modeling of the thermal mechanics of lithium-ion battery cells," Applied Energy, Elsevier, vol. 178(C), pages 633-646.
    2. Jaguemont, J. & Boulon, L. & Dubé, Y., 2016. "A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures," Applied Energy, Elsevier, vol. 164(C), pages 99-114.
    3. Jiang, Z.Y. & Qu, Z.G., 2019. "Lithium–ion battery thermal management using heat pipe and phase change material during discharge–charge cycle: A comprehensive numerical study," Applied Energy, Elsevier, vol. 242(C), pages 378-392.
    4. Rajib Mahamud & Chanwoo Park, 2022. "Theory and Practices of Li-Ion Battery Thermal Management for Electric and Hybrid Electric Vehicles," Energies, MDPI, vol. 15(11), pages 1-45, May.
    5. Xiongbin Peng & Xujian Cui & Xiangping Liao & Akhil Garg, 2020. "A Thermal Investigation and Optimization of an Air-Cooled Lithium-Ion Battery Pack," Energies, MDPI, vol. 13(11), pages 1-20, June.
    6. Bahman Shabani & Manu Biju, 2015. "Theoretical Modelling Methods for Thermal Management of Batteries," Energies, MDPI, vol. 8(9), pages 1-25, September.
    7. Kim, Hong-Keun & Lee, Kyu-Jin, 2023. "Use of a multiphysics model to investigate the performance and degradation of lithium-ion battery packs with different electrical configurations," Energy, Elsevier, vol. 262(PB).
    8. Yan, Dongxiang & Lu, Languang & Li, Zhe & Feng, Xuning & Ouyang, Minggao & Jiang, Fachao, 2016. "Durability comparison of four different types of high-power batteries in HEV and their degradation mechanism analysis," Applied Energy, Elsevier, vol. 179(C), pages 1123-1130.
    9. Lv, Youfu & Yang, Xiaoqing & Li, Xinxi & Zhang, Guoqing & Wang, Ziyuan & Yang, Chengzhao, 2016. "Experimental study on a novel battery thermal management technology based on low density polyethylene-enhanced composite phase change materials coupled with low fins," Applied Energy, Elsevier, vol. 178(C), pages 376-382.
    10. Basu, Suman & Hariharan, Krishnan S. & Kolake, Subramanya Mayya & Song, Taewon & Sohn, Dong Kee & Yeo, Taejung, 2016. "Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system," Applied Energy, Elsevier, vol. 181(C), pages 1-13.
    11. Feng, Xuning & He, Xiangming & Ouyang, Minggao & Lu, Languang & Wu, Peng & Kulp, Christian & Prasser, Stefan, 2015. "Thermal runaway propagation model for designing a safer battery pack with 25Ah LiNixCoyMnzO2 large format lithium ion battery," Applied Energy, Elsevier, vol. 154(C), pages 74-91.
    12. Borui Wang & Mingyin Yan, 2023. "Research on the Improvement of Lithium-Ion Battery Performance at Low Temperatures Based on Electromagnetic Induction Heating Technology," Energies, MDPI, vol. 16(23), pages 1-24, November.
    13. Kritana Prueksakorn & Cheng-Xu Piao & Hyunchul Ha & Taehyeung Kim, 2015. "Computational and Experimental Investigation for an Optimal Design of Industrial Windows to Allow Natural Ventilation during Wind-Driven Rain," Sustainability, MDPI, vol. 7(8), pages 1-22, August.
    14. Yirigui Yirigui & Sang-Woo Lee & A. Pouyan Nejadhashemi & Matthew R. Herman & Jong-Won Lee, 2019. "Relationships between Riparian Forest Fragmentation and Biological Indicators of Streams," Sustainability, MDPI, vol. 11(10), pages 1-24, May.
    15. Farmann, Alexander & Waag, Wladislaw & Sauer, Dirk Uwe, 2016. "Application-specific electrical characterization of high power batteries with lithium titanate anodes for electric vehicles," Energy, Elsevier, vol. 112(C), pages 294-306.
    16. Vladimir Popov, 2009. "Why the West Became Rich before China and Why China Has Been Catching Up with the West since 1949: nother Explanation of the “Great Divergence” and “Great Convergence” Stories," Working Papers w0132, New Economic School (NES).
    17. George Pavlidis & Vassilios A. Tsihrintzis, 2018. "Environmental Benefits and Control of Pollution to Surface Water and Groundwater by Agroforestry Systems: a Review," Water Resources Management: An International Journal, Published for the European Water Resources Association (EWRA), Springer;European Water Resources Association (EWRA), vol. 32(1), pages 1-29, January.
    18. Grzegorz W. Kolodko, 2009. "A Two-thirds Rate of Success: Polish Transformation and Economic Development, 1989-2008," WIDER Working Paper Series RP2009-14, World Institute for Development Economic Research (UNU-WIDER).
    19. Liu, Jiahao & Fan, Yining & Wang, Jinhui & Tao, Changfa & Chen, Mingyi, 2022. "A model-scale experimental and theoretical study on a mineral oil-immersed battery cooling system," Renewable Energy, Elsevier, vol. 201(P1), pages 712-723.
    20. Kudrin, A. & Gurvich, E., 2015. "Government Stimulus or Economic Incentives?," Journal of the New Economic Association, New Economic Association, vol. 26(2), pages 179-186.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:165:y:2016:i:c:p:639-647. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.