Analysis of Bed Load Equations and River Bed Level Variations Using Basin-Scale Process-Based Modelling Approach

Bed load transport is a key process in maintaining the dynamically stable channel geometry for restoring the form and function of river ecosystems. Bed load consists of relatively large sediment particles that are moved along the streambed by rolling, sliding or saltation. Currently, various empirical correlations are used to estimate bed load transport rates since no single procedure, whether theoretical or empirical, has yet to be universally accepted as completely satisfactory in this aspect. Bed load particles are primarily sourced from river bed materials or banks. The amount of bed load and its spatial distribution contributes significantly to river bed level changes. Hillslope sediment contribution, mostly available to the river in the form of suspended load, also plays an important role in river bed level changes. This study aims to analyse different bed load equations and the resultant computations of river bed level variations using a process-based sediment dynamic model. Analyses have revealed that different bed load equations were mainly deduced from the concept of relating bed shear stresses to their critical values which are highly factored by the slope gradient, water discharge and particle sizes. In this study, river bed level variations are calculated by estimating total surplus or deficit sediment loads (suspended loads and bed loads) in a channel section. This paper describes the application of different widely used bed load equations, and evaluation of their various parameters and relative performances for a case study area (Abukuma River Basin, Japan) using a basin-scale process-based modelling approach. Relative performances of river bed level simulations obtained by using different bed load equations are also presented. This paper elaborates on the modelling approaches for river bed load and bed level simulations. Although verifications were not done due to unavailability of field data for bed load, qualitative evaluations were conducted vis-à-vis field data on flow and suspended sediment loads as well as the bed loads presented in different past studies. Copyright Springer Science+Business Media B.V. 2012