IDEAS home Printed from https://ideas.repec.org/a/sae/risrel/v237y2023i4p823-835.html
   My bibliography  Save this article

Investigation on fatigue life prediction and reliability design of 304 stainless steel manufactured by laser metal deposition

Author

Listed:
  • Weibo Huang
  • Yimin Zhang

Abstract

Laser metal deposition (LMD) is an advanced technology to manufacture the specimen by layer-by-layer method. In this paper, the fatigue tests of 304 stainless steel (SS304) smooth specimens manufactured by LMD are conducted with the stress ratio of −1 and the frequency of 10 Hz. Considering that the fatigue crack is caused by the material defect on the subsurface, the fatigue life of smooth specimen under the different cyclic stress amplitudes are predicted based on the dislocation model, equivalent initial crack size and empirical formula. Lognormal, two-parameter Weibull and extreme maximum value distributions are applied to describe the fatigue life of the smooth specimens at the different cyclic stress amplitudes. The result shows that two-parameter Weibull distribution has the best ability to describe the fatigue life distribution. Based on two-parameter Weibull distribution, the probabilistic-stress-number ( P - S-N ) curves at the four different reliability levels are plotted. Combined with the material strength degradation rule, the design checkpoint method is adopted to analyze the fatigue life reliability of smooth specimens under the different cyclic stress amplitudes. The reliability results are close to those of two-parameter Weibull distribution.

Suggested Citation

  • Weibo Huang & Yimin Zhang, 2023. "Investigation on fatigue life prediction and reliability design of 304 stainless steel manufactured by laser metal deposition," Journal of Risk and Reliability, , vol. 237(4), pages 823-835, August.
    • Handle: RePEc:sae:risrel:v:237:y:2023:i:4:p:823-835
    DOI: 10.1177/1748006X221099765
    as

    Download full text from publisher

    File URL: https://journals.sagepub.com/doi/10.1177/1748006X221099765
    Download Restriction: no
    File URL: https://libkey.io/10.1177/1748006X221099765?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Zhang, Xufang & Wang, Lei & Sørensen, John Dalsgaard, 2019. "REIF: A novel active-learning function toward adaptive Kriging surrogate models for structural reliability analysis," Reliability Engineering and System Safety, Elsevier, vol. 185(C), pages 440-454.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Roy, Atin & Chakraborty, Subrata, 2022. "Reliability analysis of structures by a three-stage sequential sampling based adaptive support vector regression model," Reliability Engineering and System Safety, Elsevier, vol. 219(C).
    2. Menz, Morgane & Gogu, Christian & Dubreuil, Sylvain & Bartoli, Nathalie & Morio, Jérôme, 2020. "Adaptive coupling of reduced basis modeling and Kriging based active learning methods for reliability analyses," Reliability Engineering and System Safety, Elsevier, vol. 196(C).
    3. Dhulipala, Somayajulu L.N. & Shields, Michael D. & Chakroborty, Promit & Jiang, Wen & Spencer, Benjamin W. & Hales, Jason D. & Labouré, Vincent M. & Prince, Zachary M. & Bolisetti, Chandrakanth & Che, 2022. "Reliability estimation of an advanced nuclear fuel using coupled active learning, multifidelity modeling, and subset simulation," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    4. Bolin Liu & Liyang Xie, 2020. "An Improved Structural Reliability Analysis Method Based on Local Approximation and Parallelization," Mathematics, MDPI, vol. 8(2), pages 1-13, February.
    5. Li, Peiping & Wang, Yu, 2022. "An active learning reliability analysis method using adaptive Bayesian compressive sensing and Monte Carlo simulation (ABCS-MCS)," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    6. Ni, Pinghe & Li, Jun & Hao, Hong & Yan, Weimin & Du, Xiuli & Zhou, Hongyuan, 2020. "Reliability analysis and design optimization of nonlinear structures," Reliability Engineering and System Safety, Elsevier, vol. 198(C).
    7. Sheibani, Mohamadreza & Ou, Ge, 2021. "Adaptive local kernels formulation of mutual information with application to active post-seismic building damage inference," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    8. Teixeira, Rui & Nogal, Maria & O’Connor, Alan & Martinez-Pastor, Beatriz, 2020. "Reliability assessment with density scanned adaptive Kriging," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
    9. Zhao, Enyong & Wang, Qihan & Alamdari, Mehrisadat Makki & Gao, Wei, 2023. "Advanced virtual model assisted most probable point capturing method for engineering structures," Reliability Engineering and System Safety, Elsevier, vol. 239(C).
    10. Di Maio, F. & Belotti, M. & Volpe, M. & Selva, J. & Zio, E., 2022. "Parallel density scanned adaptive Kriging to improve local tsunami hazard assessment for coastal infrastructures," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    11. Saraygord Afshari, Sajad & Enayatollahi, Fatemeh & Xu, Xiangyang & Liang, Xihui, 2022. "Machine learning-based methods in structural reliability analysis: A review," Reliability Engineering and System Safety, Elsevier, vol. 219(C).
    12. Zhang, Ruijing & Dai, Hongzhe, 2022. "A non-Gaussian stochastic model from limited observations using polynomial chaos and fractional moments," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    13. Chen, Jiahui & Chen, Zhicheng & Xu, Yang & Li, Hui, 2021. "Efficient reliability analysis combining kriging and subset simulation with two-stage convergence criterion," Reliability Engineering and System Safety, Elsevier, vol. 214(C).
    14. Wang, Lei & Hu, Zhuo & Dang, Chao & Beer, Michael, 2024. "Refined parallel adaptive Bayesian quadrature for estimating small failure probabilities," Reliability Engineering and System Safety, Elsevier, vol. 244(C).
    15. Yang, Seonghyeok & Lee, Mingyu & Lee, Ikjin, 2023. "A new sampling approach for system reliability-based design optimization under multiple simulation models," Reliability Engineering and System Safety, Elsevier, vol. 231(C).
    16. Zhang, Yu & Dong, You & Frangopol, Dan M., 2024. "An error-based stopping criterion for spherical decomposition-based adaptive Kriging model and rare event estimation," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    17. Shi, Yan & Lu, Zhenzhou & He, Ruyang & Zhou, Yicheng & Chen, Siyu, 2020. "A novel learning function based on Kriging for reliability analysis," Reliability Engineering and System Safety, Elsevier, vol. 198(C).
    18. Teixeira, Rui & Martinez-Pastor, Beatriz & Nogal, Maria & O’Connor, Alan, 2021. "Reliability analysis using a multi-metamodel complement-basis approach," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    19. Tian, Yuxuan & Guan, Xiaoshu & Sun, Huabin & Bao, Yuequan, 2024. "An adaptive structural dominant failure modes searching method based on graph neural network," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    20. Zhou, Jin & Li, Jie, 2023. "IE-AK: A novel adaptive sampling strategy based on information entropy for Kriging in metamodel-based reliability analysis," Reliability Engineering and System Safety, Elsevier, vol. 229(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:sae:risrel:v:237:y:2023:i:4:p:823-835. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: SAGE Publications (email available below). General contact details of provider: .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.