IDEAS home Printed from https://ideas.repec.org/a/sae/engenv/v31y2020i2p330-347.html
   My bibliography  Save this article

Performance evaluation of upflow anaerobic sludge blanket reactor using immobilized ZnO nanoparticle enhanced continuous biogas production

Author

Listed:
  • Anwar Ahmad
  • Sajjala Sreedhar Reddy

Abstract

In this study, zinc oxide nanoparticles immobilized by methylenebisacrylamide were used for anaerobic consortium application and were examined for biomass retention capacity characterized in terms of volatile solids and specific methanogenic activity. The upflow anaerobic sludge blanket reactor was operated at various hydraulic retention times and was fed with palm oil mill effluent as a carbon source. The highest methane production rate of 510 mL CH 4 ·L −1 ·h −1 with a methane yield of 68.3 L CH 4 g −1 ·COD added was obtained at palm oil mill effluent concentration of 20 g COD·L -1 and 24 h of hydraulic retention time. The average biogas (4.5 L) showed methane content and chemical oxygen demand reduction of 84.5 and 95.7%, respectively. R max was 570 mL L −1 ·POME·h −1 at 15% of zinc oxide nanoparticles, with butyrate and acetic acid in an effluent contained when operated at a hydraulic retention time of 24 h and a palm oil mill effluent concentration of 20 g COD L −1 . A CO 2 reduction of 93.6% was obtained at 15% w/v loading of zinc oxide nanoparticle. Experiments demonstrated that with the granule bead size of immobilized zinc oxide nanoparticle of 3.99 mm, production of CH 4 and sequester of CO 2 were 650 m 3 ·d −1 and 456 m 3 ·d −1 , respectively. At 15% zinc oxide nanoparticle, granule leakage was found to be 0.065 mg·L −1 . It is significant that this is the first report on immobilized zinc oxide nanoparticle granule biomass for biogas production from wastewater.

Suggested Citation

  • Anwar Ahmad & Sajjala Sreedhar Reddy, 2020. "Performance evaluation of upflow anaerobic sludge blanket reactor using immobilized ZnO nanoparticle enhanced continuous biogas production," Energy & Environment, , vol. 31(2), pages 330-347, March.
  • Handle: RePEc:sae:engenv:v:31:y:2020:i:2:p:330-347
    DOI: 10.1177/0958305X19865967
    as

    Download full text from publisher

    File URL: https://journals.sagepub.com/doi/10.1177/0958305X19865967
    Download Restriction: no

    File URL: https://libkey.io/10.1177/0958305X19865967?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Raquel Barrena & Javier Moral-Vico & Xavier Font & Antoni Sánchez, 2022. "Enhancement of Anaerobic Digestion with Nanomaterials: A Mini Review," Energies, MDPI, vol. 15(14), pages 1-11, July.
    2. Anwar Ahmad & Salam S AlDawey & SS Reddy, 2021. "Anaerobic degradation of palm oil mill effluent with aluminum bauxite residue for methane production," Energy & Environment, , vol. 32(2), pages 226-241, March.
    3. Abdallah, Muhammed S. & Mansour, Mohy S. & Allam, Nageh K., 2021. "Mapping the stability of free-jet biogas flames under partially premixed combustion," Energy, Elsevier, vol. 220(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:sae:engenv:v:31:y:2020:i:2:p:330-347. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: SAGE Publications (email available below). General contact details of provider: .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.