IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v14y2022i19p12508-d930716.html
   My bibliography  Save this article

Study on Creep Characteristics of Water Saturated Phyllite

Author

Listed:
  • Yabin Wu

    (Changsha Institute of Mining Research Co., Ltd., Changsha 410012, China
    State Key Laboratory of Safety Technology of Metal Mine, Changsha 410012, China)

  • Jianhua Hu

    (Zijin School of Geology and Mining, Fuzhou University, Fuzhou 350108, China)

  • Guanping Wen

    (School of Resources and Safety Engineering, Central South University, Changsha 410083, China)

Abstract

Phyllite is affected by its own bedding, stress environment and water-saturated conditions. There are great differences in its deformation and failure in engineering, and its creep characteristics are an important basis for evaluating the long-term stability of phyllite engineering. Therefore, this study carried out creep tests of water-saturated phyllite under different bedding angles and confining pressures, studied the coupling effect of factors that affect the creep characteristics of phyllite, and investigated and analyzed the deformation characteristics of a phyllite roadway support on site to provide basic support for phyllite roadway mine disaster control and collaborative mining research. The results showed the following: (1) When the bedding dip angle was 30~60°, under the control of the bedding, the sliding deformation along the bedding suddenly increased under the low-stress condition and the specimen did not undergo structural damage. It could continuously bear multi-level stress and generated creep deformation. In this case, a phyllite roadway should adopt the support method of combining flexibility and rigidity. (2) In the process of multi-stage stress loading, the creep instantaneous stress was directly proportional to the initial stress. When the stress was loaded to 50% of the failure strength, the instantaneous stress tended to be stable and maintained a linear, slightly increasing relationship with the stress. When the bedding angle was 30~60°, the creep deformation accounted for more than 50% of the total deformation. The bedding angles of 0° and 90° were dominated by the instantaneous strain during the stress loading process. For the flexible support of the roadway, the deformation caused by disturbance stress should be fully considered. (3) The uniaxial creep specimen mainly displayed compression shear tensile failure, with a small number of parallel cracks along the main fracture surface. The triaxial creep fracture mode changed to single shear failure. The confining pressure showed greater inhibition of the creep of the specimen with a bedding inclination of 0° and 90°. The strength design of the rigid support should refer to the original rock stress value of the roadway. The creep deformation and failure of the specimen with a bedding inclination of 30~60° were mainly controlled by the bedding. The included angle between the bedding dip angle and the maximum principal stress should be kept within 30~60° as far as possible in the roadway layout.

Suggested Citation

  • Yabin Wu & Jianhua Hu & Guanping Wen, 2022. "Study on Creep Characteristics of Water Saturated Phyllite," Sustainability, MDPI, vol. 14(19), pages 1-17, September.
  • Handle: RePEc:gam:jsusta:v:14:y:2022:i:19:p:12508-:d:930716
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/14/19/12508/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/14/19/12508/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Lin Gao & Xinyu Zhan & Pandong Zhang & Zhijie Wen & Zhenqian Ma & Dezhong Kong & Xiangtao Kang & Sen Han, 2022. "Study on the Dip Angle Effect of Asymmetric Deformation and Failure of the Gob-Side Coal–Rock Roadway in Gently Inclined Coal Seam," Sustainability, MDPI, vol. 14(12), pages 1-15, June.
    2. Haiyang Yi & Hongwei Zhou & Rui Wang & Di Liu & Jingyang Ding, 2018. "On the Relationship between Creep Strain and Permeability of Granite: Experiment and Model Investigation," Energies, MDPI, vol. 11(10), pages 1-15, October.
    3. Zhigang Yuan & Jintao Zhao & Shuqing Li & Zehua Jiang & Fei Huang, 2022. "A Unified Solution for Surrounding Rock of Roadway Considering Seepage, Dilatancy, Strain-Softening and Intermediate Principal Stress," Sustainability, MDPI, vol. 14(13), pages 1-18, July.
    4. Hai Wu & Qian Jia & Weijun Wang & Nong Zhang & Yiming Zhao, 2021. "Experimental Test on Nonuniform Deformation in the Tilted Strata of a Deep Coal Mine," Sustainability, MDPI, vol. 13(23), pages 1-14, November.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bo Hu & Xiangqi Hu & Chenggeng Lin & Guangzhen Du & Tianxing Ma & Kaihui Li, 2023. "Evolution of Physical and Mechanical Properties of Granite after Thermal Treatment under Cyclic Uniaxial Compression," Sustainability, MDPI, vol. 15(18), pages 1-22, September.
    2. Weijian Yu & Hanxiao Guo & Ke Li & Bao Pan, 2023. "Experimental Study on Uniaxial Compression Mechanics and Failure Characteristics of Non-Through Fractured Rock," Sustainability, MDPI, vol. 15(6), pages 1-15, March.
    3. Huichen Xu & Xiaoming Sun & Yong Zhang & Chengwei Zhao & Chengyu Miao & Dong Wang, 2023. "Creep Characteristics of Layered Rock Masses after Water Absorption Due to Structural Effects," IJERPH, MDPI, vol. 20(5), pages 1-18, February.
    4. Wensheng Wei & Guojun Zhang & Chunyuan Li & Wenshuai Zhang & Yupeng Shen, 2023. "Mechanism and Control of Asymmetric Floor Heave in Deep Roadway Disturbed by Roof Fracture," Sustainability, MDPI, vol. 15(8), pages 1-21, April.
    5. Fangcai Zhu & Zhijia Yang & Qing Liu & Yanlin Zhao & Binbin Wu & Shaolong Zhang & Qi Chen & Yifan Chen & Rui Luo, 2023. "Experimental Study on Pile Load Transfer Considering Rice Stone Filled-In Gaps between Steel Drive Pipe and Pile Casing in Karst Region," Sustainability, MDPI, vol. 15(20), pages 1-17, October.
    6. Xuefei Wu & Hongxia Li & Baoli Wang & Mengbo Zhu, 2022. "Review on Improvements to the Safety Level of Coal Mines by Applying Intelligent Coal Mining," Sustainability, MDPI, vol. 14(24), pages 1-17, December.
    7. Zhou, H.W. & Liu, Z.L. & Zhong, J.C. & Chen, B.C. & Zhao, J.W. & Xue, D.J., 2022. "NMRI online observation of coal fracture and pore structure evolution under confining pressure and axial compressive loads: A novel approach," Energy, Elsevier, vol. 261(PA).
    8. Linchao Dai & Zhigang Zhang & Haitao Sun & Huali Gao, 2022. "Research on Mechanical Properties and Energy Evolution Law of Coal–Rock Assemblage with Different Gas Pressures," Sustainability, MDPI, vol. 14(16), pages 1-11, August.
    9. Chuanwei Zang & Jia Zhou & Miao Chen & Feng Bai & Zhengyang Zhao, 2023. "Study on the Instability Mechanism of Coal and Rock Mining under a Residual Coal Pillar in Gently Inclined Short-Distance Coal Seam with the Discrete Element," Sustainability, MDPI, vol. 15(7), pages 1-15, April.
    10. Krzysztof Skrzypkowski & Krzysztof Zagórski & Anna Zagórska & Derek B. Apel & Jun Wang & Huawei Xu & Lijie Guo, 2022. "Choice of the Arch Yielding Support for the Preparatory Roadway Located near the Fault," Energies, MDPI, vol. 15(10), pages 1-21, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:14:y:2022:i:19:p:12508-:d:930716. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.