IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v11y2019i21p6049-d282061.html
   My bibliography  Save this article

Influence of Evacuation Walkway Design Parameters on Passenger Evacuation Time along Elevated Rail Transit Lines Using a Multi-Agent Simulation

Author

Listed:
  • Zihua Pan

    (School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China
    Department of Civil and Environmental Engineering, Norwegian University of Science and Technology, 7491 Trondheim, Norway)

  • Qingchao Wei

    (School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China)

  • Olav Torp

    (Department of Civil and Environmental Engineering, Norwegian University of Science and Technology, 7491 Trondheim, Norway)

  • Albert Lau

    (Department of Civil and Environmental Engineering, Norwegian University of Science and Technology, 7491 Trondheim, Norway)

Abstract

Passenger evacuation on elevated railway lines has always been an important issue for elevated rail transit safety management, because it is challenging to evacuate passengers efficiently in the event of man-made calamities and natural disasters. Therefore, an evacuation walkway has been designed as a primary solution to assist passenger evacuation during an emergency on elevated rail transit lines. However, investigations on how evacuation walkway designs influence passenger evacuation time are still limited. This study established two evacuation scenarios of interval evacuation on elevated rail transit lines and put forward a new evacuation time measurement method, based on the concept of ‘evacuation time for passengers leaving the evacuation walkway risk zone’. Then, the evacuation time for 90 combinations of entrance widths and walkway widths was simulated by a multi-agent evacuation simulator, Pathfinder, considering 1032 passengers being evacuated both unidirectionally and bidirectionally. The results show that the entrance width and walkway width have a combined effect on passenger evacuation time. An increase in the walkway width from 0.7 m to 1.5 m may potentially reduce the evacuation time by 54.5% in unidirectional evacuation, and 35.2% in bidirectional evacuation. An increase in the entrance width results in a noticeable evacuation time fluctuation when the walkway width is 0.7 and 0.8 m for both evacuation scenarios, while in a bidirectional evacuation, a noticeable fluctuation also can be observed when the walkway width is within the range of 1.4–1.5 m. According to the study, a potentially good design parameter combination for a newly built evacuation walkway is 1.3 m and 1.4 m for the walkway width and entrance width, respectively. The findings from this study may provide a useful reference in the optimization of the design of evacuation facilities and improvement of passenger evacuation safety in rail transit systems.

Suggested Citation

  • Zihua Pan & Qingchao Wei & Olav Torp & Albert Lau, 2019. "Influence of Evacuation Walkway Design Parameters on Passenger Evacuation Time along Elevated Rail Transit Lines Using a Multi-Agent Simulation," Sustainability, MDPI, vol. 11(21), pages 1-17, October.
  • Handle: RePEc:gam:jsusta:v:11:y:2019:i:21:p:6049-:d:282061
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/11/21/6049/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/11/21/6049/
    Download Restriction: no
    ---><---

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:11:y:2019:i:21:p:6049-:d:282061. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.