IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i19p6886-d920113.html
   My bibliography  Save this article

Assessment of the Structure of Cutting Heads with Regard to the Mining Machine Load Using Proprietary Software

Author

Listed:
  • Krzysztof Krauze

    (Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland)

  • Kamil Mucha

    (Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland)

  • Tomasz Wydro

    (Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland)

  • Ryszard Klempka

    (Faculty of Electrical Engineering, Automatics, Computer Science and Biomedical Engineering, AGH University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland)

Abstract

The cutting heads currently used in longwall shearers, roadheaders, road milling machines and excavators are equipped with cutting tools called picks. The most commonly applied are conical picks, less frequently—radial picks or tangent picks. The picks are detachably mounted in holders installed on the body of the cutting head, to which they are usually welded (shearers) or, less frequently, form-connected (road milling machines). The arrangement of picks and holders (positioning) on the body of the cutting head, according to a previously designed diagram (pick arrangement), enables extraction of the mineral with a specific width (web) and diameter (height). Ideally, the pick arrangement should generate the lowest cutting resistance, which loads the cutting machine. The pick arrangement is characterized by design parameters (number of holders, pitch in the line and between the cutting lines) and kinematic parameters (rotational speed and advance speed). The values of these parameters result mainly from the properties of the mineral and the type of mining machine. Therefore, the correct positioning of the holders on the cutting head and their setting (cutting angles) are vitally important. This applies to both the design and implementation stages. For this purpose, the authors first developed models of pick arrangements and, next, the algorithm and software enabling the determination of cutting resistance, both in terms of the average value and its variation. Then, based on the performed calculations and the obtained results, it can be assessed whether the cutting head and the pick arrangement are properly designed. As a result of the performed calculations and analysis of the test results, the average values of the cutting resistance moment and the cutting machine advance forces were determined. It was found that the proposed pick arrangements are characterized by similar values of moments and forces. The greatest differences were found in the variability of these parameters, which translates into the dynamics of the cutting machine operation.

Suggested Citation

  • Krzysztof Krauze & Kamil Mucha & Tomasz Wydro & Ryszard Klempka, 2022. "Assessment of the Structure of Cutting Heads with Regard to the Mining Machine Load Using Proprietary Software," Energies, MDPI, vol. 15(19), pages 1-22, September.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:19:p:6886-:d:920113
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/19/6886/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/19/6886/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ildiko Brînaș & Andrei Andraș & Sorin Mihai Radu & Florin Dumitru Popescu & Iosif Andraș & Bogdan Ioan Marc & Alexandru Robert Cioclu, 2021. "Determination of the Bucket Wheel Drive Power by Computer Modeling Based on Specific Energy Consumption and Cutting Geometry," Energies, MDPI, vol. 14(13), pages 1-17, June.
    2. Piotr Cheluszka, 2020. "Optimization of the Cutting Process Parameters to Ensure High Efficiency of Drilling Tunnels and Use the Technical Potential of the Boom-Type Roadheader," Energies, MDPI, vol. 13(24), pages 1-23, December.
    3. Krzysztof Krauze & Kamil Mucha & Tomasz Wydro & Edward Pieczora, 2021. "Functional and Operational Requirements to Be Fulfilled by Conical Picks Regarding Their Wear Rate and Investment Costs," Energies, MDPI, vol. 14(12), pages 1-19, June.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Łukasz Bołoz & Witold Biały, 2022. "Methods and Test Benches for Cutting Tools Testing—A Review," Energies, MDPI, vol. 16(1), pages 1-17, December.
    2. Krzysztof Krauze & Kamil Mucha & Tomasz Wydro & Edward Pieczora, 2021. "Functional and Operational Requirements to Be Fulfilled by Conical Picks Regarding Their Wear Rate and Investment Costs," Energies, MDPI, vol. 14(12), pages 1-19, June.
    3. Piotr Cheluszka & Eryk Remiorz & Jamal Rostami, 2022. "The Use of a Roadheader Simulator in Research of Dynamics and Energy-Consumption of Excavating Underground Roadways and Tunnels," Energies, MDPI, vol. 15(18), pages 1-25, September.
    4. Dawid Szurgacz & Beata Borska & Ryszard Diederichs & Anthony J. S. Spearing & Sergey Zhironkin, 2023. "Minimizing Internal Leaks of a Powered Roof Support’s Hydraulic Prop Based on Double Block with Charging," Energies, MDPI, vol. 16(3), pages 1-14, January.
    5. George Kritikakis & Michael Galetakis & Antonios Vafidis & George Apostolopoulos & Theodore Michalakopoulos & Miltiades Triantafyllou & Christos Roumpos & Francis Pavloudakis & Basileios Deligiorgis &, 2023. "Toward the Optimization of Mining Operations Using an Automatic Unmineable Inclusions Detection System for Bucket Wheel Excavator Collision Prevention: A Synthetic Study," Sustainability, MDPI, vol. 15(17), pages 1-20, August.
    6. Jarosław Joostberens & Arkadiusz Pawlikowski & Dariusz Prostański & Krzysztof Nieśpiałowski, 2021. "Method for Assessment of Operation of Analog Filters Installed in the Measuring Lines for Electrical Quantities of a Mining Machine’s Converter Power Supply System," Energies, MDPI, vol. 14(9), pages 1-15, April.
    7. Xiaodong Ji & Minjun Zhang & Yuanyuan Qu & Hai Jiang & Miao Wu, 2021. "Travel Dynamics Analysis and Intelligent Path Rectification Planning of a Roadheader on a Roadway," Energies, MDPI, vol. 14(21), pages 1-21, November.
    8. Dawid Szurgacz & Beata Borska & Sergey Zhironkin & Ryszard Diederichs & Anthony J. S. Spearing, 2022. "Optimization of the Load Capacity System of Powered Roof Support: A Review," Energies, MDPI, vol. 15(16), pages 1-15, August.
    9. Piotr Cheluszka, 2021. "Numerical Studies of the Dynamics of the Roadheader Equipped with an Automatic Control System during Cutting of Rocks with Different Mechanical Properties," Energies, MDPI, vol. 14(21), pages 1-29, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:19:p:6886-:d:920113. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.