IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i7p1583-d339701.html
   My bibliography  Save this article

Recipe of Lightweight Slurry with High Early Strength of the Resultant Cement Sheath

Author

Listed:
  • Marcin Kremieniewski

    (Oil and Gas Institute, National Research Institute, 25A Lubicz Str., 31-503 Krakow, Poland)

Abstract

Admixtures of mineral or waste filling materials are used to reduce slurry density. However, the sheath made of lightweight cement slurry has low mechanical performance at the initial bonding time. The required strength is achieved later. This is the main problem when evaluating the cement bond logging. The waiting time for geophysical measurements after injecting and bonding of cement is nowadays increasingly shortened. This is forced by economic factors. Too early geophysical measurements may result in obtaining a false indication of the cement bond logging. The lack of cement or partial bonding, despite the presence of slurry in the annular space is then found. The slurry developed by the author achieves high compressive strength after a short bonding time. Reducing the amount of water in the slurry resulted in a lowered filtration value. This is important in preventing gas migration after the cementing. The designed slurry also reaches the value of 3.5 MPa in a short time. This allows for an earlier commencement of a well drilling. The use of said slurry improves the effectiveness of the well sealing and makes it possible to obtain a reliable knowledge of the bond logging.

Suggested Citation

  • Marcin Kremieniewski, 2020. "Recipe of Lightweight Slurry with High Early Strength of the Resultant Cement Sheath," Energies, MDPI, vol. 13(7), pages 1-13, April.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:7:p:1583-:d:339701
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/7/1583/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/7/1583/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Chengcheng Tao & Barbara G. Kutchko & Eilis Rosenbaum & Wei-Tao Wu & Mehrdad Massoudi, 2019. "Steady Flow of a Cement Slurry," Energies, MDPI, vol. 12(13), pages 1-25, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Marcin Kremieniewski & Rafał Wiśniowski & Stanisław Stryczek & Grzegorz Orłowicz, 2021. "Possibilities of Limiting Migration of Natural Gas in Boreholes in the Context of Laboratory Studies," Energies, MDPI, vol. 14(14), pages 1-13, July.
    2. Stanisław Stryczek & Andrzej Gonet & Marcin Kremieniewski, 2022. "Special Cement Slurries for Strengthening Salt Rock Mass," Energies, MDPI, vol. 15(16), pages 1-10, August.
    3. Marcin Kremieniewski & Bartłomiej Jasiński & Grzegorz Zima & Łukasz Kut, 2021. "Reduction of Fractionation of Lightweight Slurry to Geothermal Boreholes," Energies, MDPI, vol. 14(12), pages 1-11, June.
    4. Marcin Kremieniewski & Rafał Wiśniowski & Stanisław Stryczek & Paweł Łopata, 2021. "Comparison of Efficient Ways of Mud Cake Removal from Casing Surface with Traditional and New Agents," Energies, MDPI, vol. 14(12), pages 1-13, June.
    5. Krzysztof Seńczuk & Aneta Sapińska-Śliwa & Tomasz Kowalski, 2022. "Utilization of Basalt Dust as Waste Material in Cement Grouts for Geothermal Application," Energies, MDPI, vol. 15(19), pages 1-30, September.
    6. Marcin Kremieniewski, 2020. "Ultra-Lightweight Cement Slurry to Seal Wellbore of Poor Wellbore Stability," Energies, MDPI, vol. 13(12), pages 1-19, June.
    7. Abdennour C. Seibi & Fatick Nath & Adedapo B. Adeoye & Kaustubh G. Sawant, 2022. "Optimization of Cement–Rubber Composites for Eco-Sustainable Well Completion: Rheological, Mechanical, Petrophysical, and Creep Properties," Energies, MDPI, vol. 15(8), pages 1-20, April.
    8. Marcin Kremieniewski & Miłosz Kędzierski & Sławomir Błaż, 2021. "Increasing the Efficiency of Sealing the Borehole in Terms of Spacer Pumping Time," Energies, MDPI, vol. 14(20), pages 1-11, October.
    9. Marcin Kremieniewski & Sławomir Błaż & Stanisław Stryczek & Rafał Wiśniowski & Andrzej Gonet, 2021. "Effect of Cleaning the Annular Space on the Adhesion of the Cement Sheath to the Rock," Energies, MDPI, vol. 14(16), pages 1-15, August.
    10. Stanisław Stryczek & Andrzej Gonet & Marcin Kremieniewski & Tomasz Kowalski, 2023. "Forecasting Strength Parameters of Hardened Geopolymer Slurries Applied to Seal Casing Columns in Boreholes," Energies, MDPI, vol. 16(11), pages 1-16, May.
    11. Marcin Kremieniewski, 2022. "Improving the Efficiency of Oil Recovery in Research and Development," Energies, MDPI, vol. 15(12), pages 1-7, June.
    12. Marcin Kremieniewski, 2021. "Hybrid Washer Fluid for Primary Cementing," Energies, MDPI, vol. 14(5), pages 1-11, February.
    13. Marcin Kremieniewski, 2020. "Influence of Graphene Oxide on Rheological Parameters of Cement Slurries," Energies, MDPI, vol. 13(20), pages 1-15, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Meng-Ge Li & Feng Feng & Wei-Tao Wu & Mehrdad Massoudi, 2020. "Numerical Simulations of the Flow of a Dense Suspension Exhibiting Yield-Stress and Shear-Thinning Effects," Energies, MDPI, vol. 13(24), pages 1-21, December.
    2. Chengcheng Tao & Barbara G. Kutchko & Eilis Rosenbaum & Mehrdad Massoudi, 2020. "A Review of Rheological Modeling of Cement Slurry in Oil Well Applications," Energies, MDPI, vol. 13(3), pages 1-55, January.
    3. Chengcheng Tao & Eilis Rosenbaum & Barbara G. Kutchko & Mehrdad Massoudi, 2021. "A Brief Review of Gas Migration in Oilwell Cement Slurries," Energies, MDPI, vol. 14(9), pages 1-22, April.
    4. Marcin Kremieniewski, 2020. "Influence of Graphene Oxide on Rheological Parameters of Cement Slurries," Energies, MDPI, vol. 13(20), pages 1-15, October.
    5. Marcin Kremieniewski & Bartłomiej Jasiński & Grzegorz Zima & Łukasz Kut, 2021. "Reduction of Fractionation of Lightweight Slurry to Geothermal Boreholes," Energies, MDPI, vol. 14(12), pages 1-11, June.
    6. Abdennour C. Seibi & Fatick Nath & Adedapo B. Adeoye & Kaustubh G. Sawant, 2022. "Optimization of Cement–Rubber Composites for Eco-Sustainable Well Completion: Rheological, Mechanical, Petrophysical, and Creep Properties," Energies, MDPI, vol. 15(8), pages 1-20, April.
    7. Mehrdad Massoudi, 2020. "Mathematical Modeling of Fluid Flow and Heat Transfer in Petroleum Industries and Geothermal Applications," Energies, MDPI, vol. 13(6), pages 1-4, March.
    8. Marcin Kremieniewski, 2020. "Ultra-Lightweight Cement Slurry to Seal Wellbore of Poor Wellbore Stability," Energies, MDPI, vol. 13(12), pages 1-19, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:7:p:1583-:d:339701. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.