IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i10p2673-d362881.html
   My bibliography  Save this article

Faults as Volumetric Weak Zones in Reservoir-Scale Hydro-Mechanical Finite Element Models—A Comparison Based on Grid Geometry, Mesh Resolution and Fault Dip

Author

Listed:
  • Torben Treffeisen

    (Institut für Angewandte Geowissenschaften, TU Darmstadt, Schnittspahnstraße 9, 64287 Darmstadt, Germany)

  • Andreas Henk

    (Institut für Angewandte Geowissenschaften, TU Darmstadt, Schnittspahnstraße 9, 64287 Darmstadt, Germany)

Abstract

An appropriate representation of faults is fundamental for hydro-mechanical reservoir models to obtain robust quantitative insights into the spatial distribution of stress, strain and pore pressure. Using a generic model containing a reservoir layer displaced by a fault, we examine three issues which are typically encountered if faults have to be incorporated in reservoir-scale finite element simulations. These are (1) mesh resolution aspects honoring the scale difference between the typical cell size of the finite element (FE) reservoir model and the heterogeneity of a fault zone, (2) grid geometry relative to the fault geometry and (3) fault dip. Different fault representations were implemented and compared regarding those on the modeling results. Remarkable differences in the calculated stress and strain patterns as well as the pore pressure field are observed. The modeling results are used to infer some general recommendations concerning the implementation of faults in hydro-mechanical reservoir models regarding mesh resolution and grid geometry, taking into account model-scale and scope of interest. The goal is to gain more realistic simulations and, hence, more reliable results regarding fault representation in reservoir models to improve production, lower cost and reduce risk during subsurface operations.

Suggested Citation

  • Torben Treffeisen & Andreas Henk, 2020. "Faults as Volumetric Weak Zones in Reservoir-Scale Hydro-Mechanical Finite Element Models—A Comparison Based on Grid Geometry, Mesh Resolution and Fault Dip," Energies, MDPI, vol. 13(10), pages 1-27, May.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:10:p:2673-:d:362881
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/10/2673/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/10/2673/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Cristiano Collettini & André Niemeijer & Cecilia Viti & Chris Marone, 2009. "Fault zone fabric and fault weakness," Nature, Nature, vol. 462(7275), pages 907-910, December.
    2. Streit, Jürgen E & Hillis, Richard R, 2004. "Estimating fault stability and sustainable fluid pressures for underground storage of CO2 in porous rock," Energy, Elsevier, vol. 29(9), pages 1445-1456.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Torben Treffeisen & Andreas Henk, 2020. "Elastic and Frictional Properties of Fault Zones in Reservoir-Scale Hydro-Mechanical Models—A Sensitivity Study," Energies, MDPI, vol. 13(18), pages 1-28, September.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. John D. Bedford & Daniel R. Faulkner & Nadia Lapusta, 2022. "Fault rock heterogeneity can produce fault weakness and reduce fault stability," Nature Communications, Nature, vol. 13(1), pages 1-7, December.
    2. Sean P. Rigby & Ali Alsayah & Richard Seely, 2022. "Impact of Exposure to Supercritical Carbon Dioxide on Reservoir Caprocks and Inter-Layers during Sequestration," Energies, MDPI, vol. 15(20), pages 1-34, October.
    3. Wang, Jinkai & Feng, Xiaoyong & Wanyan, Qiqi & Zhao, Kai & Wang, Ziji & Pei, Gen & Xie, Jun & Tian, Bo, 2022. "Hysteresis effect of three-phase fluids in the high-intensity injection–production process of sandstone underground gas storages," Energy, Elsevier, vol. 242(C).
    4. Víctor Vilarrasa & Jonny Rutqvist & Antonio Pio Rinaldi, 2015. "Thermal and capillary effects on the caprock mechanical stability at In Salah, Algeria," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 5(4), pages 449-461, August.
    5. Bing Bai & Xiaochun Li & Haiqing Wu & Yongsheng Wang & Mingze Liu, 2017. "A methodology for designing maximum allowable wellhead pressure for CO 2 injection: application to the Shenhua CCS demonstration project, China," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 7(1), pages 158-181, February.
    6. Md Jamilur Rahman & Manzar Fawad & Nazmul Haque Mondol, 2022. "3D Field-Scale Geomechanical Modeling of Potential CO 2 Storage Site Smeaheia, Offshore Norway," Energies, MDPI, vol. 15(4), pages 1-21, February.
    7. Javad Naseryan Moghadam & Nazmul Haque Mondol & Per Aagaard & Helge Hellevang, 2016. "Effective stress law for the permeability of clay‐bearing sandstones by the Modified Clay Shell model," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 6(6), pages 752-774, December.
    8. Torben Treffeisen & Andreas Henk, 2020. "Elastic and Frictional Properties of Fault Zones in Reservoir-Scale Hydro-Mechanical Models—A Sensitivity Study," Energies, MDPI, vol. 13(18), pages 1-28, September.
    9. Mingze Liu & Bing Bai & Xiaochun Li & Shuai Gao & Shaobin Hu & Lei Wang & Haiqing Wu, 2016. "Assessing the applicability of unsaturated effective stress models to tensile fracturing of sandstone in CO 2 ‐water two‐phase fluids," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 6(5), pages 670-681, October.
    10. Sikandar Khan & Yehia Abel Khulief & Abdullatif Al-Shuhail, 2019. "Mitigating climate change via CO2 sequestration into Biyadh reservoir: geomechanical modeling and caprock integrity," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 24(1), pages 23-52, January.
    11. Ba Nghiep Nguyen & Zhangshuan Hou & Diana H. Bacon & Mark D. White, 2017. "A multiscale hydro‐geochemical‐mechanical approach to analyze faulted CO 2 reservoirs," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 7(1), pages 106-127, February.
    12. Sanshao Ren & Yongshuang Zhang & Jinqiu Li & Xiaoyi Liu & Ruian Wu, 2023. "A new type of sliding zone soil and its severe effect on the formation of giant landslides in the Jinsha River tectonic suture zone, China," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 117(2), pages 1847-1868, June.
    13. Wei Feng & Lu Yao & Chiara Cornelio & Rodrigo Gomila & Shengli Ma & Chaoqun Yang & Luigi Germinario & Claudio Mazzoli & Giulio Di Toro, 2023. "Physical state of water controls friction of gabbro-built faults," Nature Communications, Nature, vol. 14(1), pages 1-9, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:10:p:2673-:d:362881. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.