Author
Listed:
- Dhaundiyal, Alok
- Bercesi, Gabor
- Atsu, Divine
- Toth, Laszlo
Abstract
The comprehensive investigation of a pyrolysis reactor has been conducted on the basis of thermal engineering design. The gas dynamics, thermodynamic, and psychrometric behaviour of the producer gas have been thoroughly assessed. The pilot-scale reactor has been programmed to operate at the temperature 973 K in the absence of an inert medium. The concentric casing of the heating filament has been used as an external source of energy. The experimental task is divided into two parts: upgradation of biomass and the decomposition of pellets in a developed small-scale pyrolysis unit for the possible gas, char, and pyrolysis oil generation. The fuel upgradation is performed via quasi-static torrefaction of pine pellets using Joule heating in the presence of nitrogen gas. The volumetric gas of nitrogen flowing across the improvised furnace is 0.70 L·min−1. The obtained results are compared with the wood pellets. The unsaturated producer gas has been found to vary accordingly to the following gas equation pv0.25=C and pv−0.69=C for the processed pine pellets and wood pellets, respectively. A relative increase of 21.00% has been seen while running the reactor with the processed pine pellets. The percentage yield of the pyrolytic oil for the processed pine and wood pellets is 10.48% and 30.00% respectively. The flame temperature and adiabatic flame temperature of the producer gas (processed pine) is lowered by 8.10% and 17.00% respectively. The energy yield of processed pinechar is found to be 122.58% higher than that of wood char.
Suggested Citation
Dhaundiyal, Alok & Bercesi, Gabor & Atsu, Divine & Toth, Laszlo, 2021.
"Development of a small-scale reactor for upgraded biofuel pellets,"
Renewable Energy, Elsevier, vol. 170(C), pages 1197-1214.
Handle:
RePEc:eee:renene:v:170:y:2021:i:c:p:1197-1214
DOI: 10.1016/j.renene.2021.02.057
Download full text from publisher
As the access to this document is restricted, you may want to
for a different version of it.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:170:y:2021:i:c:p:1197-1214. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.