IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v95y2010i5p494-498.html
   My bibliography  Save this article

Reliability based inspection of nickel-based alloy welds in boiling water reactor environment

Author

Listed:
  • Khalifa, Mohamed
  • Khan, Faisal
  • Haddara, Mahmoud

Abstract

Stress corrosion cracking (SCC) problems are routinely observed in boiling water reactor (BWR) units. Nickel-based alloy welds are commonly used in BWR units; the nickel content of the material improves resistance to stress corrosion cracking. However, stress corrosion cracking is still a problem for these welds. When a crack is detected, a decision whether an immediate repair in needed has to be made. A model for estimating reliability of BWR nickel-based alloys welds subjected to SCC using non-destructive inspection techniques is introduced. The proposed methodology and model has been illustrated through a numerical example to estimate the required re-inspection interval in order to keep the target reliability level.

Suggested Citation

  • Khalifa, Mohamed & Khan, Faisal & Haddara, Mahmoud, 2010. "Reliability based inspection of nickel-based alloy welds in boiling water reactor environment," Reliability Engineering and System Safety, Elsevier, vol. 95(5), pages 494-498.
  • Handle: RePEc:eee:reensy:v:95:y:2010:i:5:p:494-498
    DOI: 10.1016/j.ress.2009.12.003
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832009002701
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.ress.2009.12.003?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:95:y:2010:i:5:p:494-498. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.