IDEAS home Printed from https://ideas.repec.org/a/eee/jrpoli/v68y2020ics0301420720303603.html
   My bibliography  Save this article

A 3D brute-force algorithm for the optimum cutting pattern of dimension stone quarries

Author

Listed:
  • Elkarmoty, Mohamed
  • Bonduà, Stefano
  • Bruno, Roberto

Abstract

This paper presents a 3D algorithm for finding the optimum cutting direction in ornamental stone quarries aiming at maximizing the recovery ratio of blocks through tackling the fracture problem that causes material and economic loses. The presented algorithm is based on 3D deterministic fracture modeling or mapping data and considers new parameters: i) displacement of the cutting grid; (ii) material lost by quarrying; (iii) irregularity of the tested area; (iv) and subdivision of large quarrying area. The algorithm searches for the optimum cutting direction and displacement of the cutting grid that maximizes the number of non-fractured blocks. The algorithm was coded in a software package named BlockCutOpt. This paper presents BlockCutOpt results applied in two case studies of different characteristics. The first case study was a limestone bench where fractures were modeled deterministically using Ground Penetrating Radar (GPR) survey. The second case study was in a very large area of granite deposit where the regional fractures were mapped using the aerial photogrammetry method (literature data). BlockCutOpt was found a fast tool for finding the optimum cutting pattern in the presented case studies. The results showed that the optimum cutting direction of blocks can vertically (within different strata) and horizontally (within very large scale area) vary, giving geometric information about the cutting grid design that optimizes the number of non-fractured blocks.

Suggested Citation

  • Elkarmoty, Mohamed & Bonduà, Stefano & Bruno, Roberto, 2020. "A 3D brute-force algorithm for the optimum cutting pattern of dimension stone quarries," Resources Policy, Elsevier, vol. 68(C).
    • Handle: RePEc:eee:jrpoli:v:68:y:2020:i:c:s0301420720303603
    DOI: 10.1016/j.resourpol.2020.101761
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0301420720303603
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.resourpol.2020.101761?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Elkarmoty, Mohamed & Bonduà, Stefano & Bruno, Roberto, 2020. "A 3D optimization algorithm for sustainable cutting of slabs from ornamental stone blocks," Resources Policy, Elsevier, vol. 65(C).
    2. Macedo, Dione & Mori Junior, Renzo & Pimentel Mizusaki, Ana Maria, 2017. "Sustainability strategies for dimension stones industry based on Northwest region of Espírito Santo State, Brazil," Resources Policy, Elsevier, vol. 52(C), pages 207-216.
    3. Careddu, Nicola & Siotto, Giampaolo & Siotto, Riccardo & Tilocca, Caterina, 2013. "From landfill to water, land and life: The creation of the Centre for stone materials aimed at secondary processing," Resources Policy, Elsevier, vol. 38(3), pages 258-265.
    4. Careddu, Nicola, 2019. "Dimension stones in the circular economy world," Resources Policy, Elsevier, vol. 60(C), pages 243-245.
    5. Carvalho, J. & Lopes, C. & Mateus, A. & Martins, L. & Goulão, M., 2018. "Planning the future exploitation of ornamental stones in Portugal using a weighed multi-dimensional approach," Resources Policy, Elsevier, vol. 59(C), pages 298-317.
    6. Careddu, Nicola & Di Capua, Giuseppe & Siotto, Giampaolo, 2019. "Dimension stone industry should meet the fundamental values of geoethics," Resources Policy, Elsevier, vol. 63(C), pages 1-1.
    7. Careddu, Nicola & Siotto, Giampaolo, 2011. "Promoting ecological sustainable planning for natural stone quarrying. The case of the Orosei Marble Producing Area in Eastern Sardinia," Resources Policy, Elsevier, vol. 36(4), pages 304-314.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Şirin, Ece & Bonduà, Stefano & Elkarmoty, Mohamed, 2021. "Environmental and economic optimization for block cutting of dimension stones in a limestone quarry," Resources Policy, Elsevier, vol. 74(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Elkarmoty, Mohamed & Bonduà, Stefano & Bruno, Roberto, 2020. "A 3D optimization algorithm for sustainable cutting of slabs from ornamental stone blocks," Resources Policy, Elsevier, vol. 65(C).
    2. Careddu, Nicola & Di Capua, Giuseppe & Siotto, Giampaolo, 2019. "Dimension stone industry should meet the fundamental values of geoethics," Resources Policy, Elsevier, vol. 63(C), pages 1-1.
    3. Şirin, Ece & Bonduà, Stefano & Elkarmoty, Mohamed, 2021. "Environmental and economic optimization for block cutting of dimension stones in a limestone quarry," Resources Policy, Elsevier, vol. 74(C).
    4. Careddu, Nicola & Cuccuru, Stefano & Grillo, Silvana Maria, 2021. "Sardinian granitoids: 4000 years of geoheritage and dimension stones," Resources Policy, Elsevier, vol. 74(C).
    5. Carretero-Gómez, Anselmo & Piedra-Muñoz, Laura, 2021. "Sustainability of non-renewable resources: the case of marble in Macael (Spain)," MPRA Paper 119917, University Library of Munich, Germany.
    6. Freire-Lista, David M. & Becerra Becerra, J.E. & Simões de Abreu, Mila, 2022. "The historical quarry of pena (Vila Real, north of Portugal): Associated cultural heritage and reuse as a geotourism resource," Resources Policy, Elsevier, vol. 75(C).
    7. Marras, Graziella & Careddu, Nicola, 2018. "Sustainable reuse of marble sludge in tyre mixtures," Resources Policy, Elsevier, vol. 59(C), pages 77-84.
    8. Carvalho, Jorge & Galos, Krzysztof & Kot-Niewiadomska, Alicja & Gugerell, Katharina & Raaness, Agnes & Lisboa, Vitor, 2021. "A look at European practices for identifying mineral resources that deserve to be safeguarded in land-use planning," Resources Policy, Elsevier, vol. 74(C).
    9. Careddu, Nicola & Siotto, Giampaolo & Marras, Graziella, 2017. "The crisis of granite and the success of marble: errors and market strategies. The Sardinian case," Resources Policy, Elsevier, vol. 52(C), pages 273-276.
    10. da Silva, Agostinho & Almeida, Isabel, 2020. "Towards INDUSTRY 4.0 | a case STUDY in ornamental stone sector," Resources Policy, Elsevier, vol. 67(C).
    11. Luís Sousa & José Lourenço & Dolores Pereira, 2019. "Suitable Re-Use of Abandoned Quarries for Restoration and Conservation of the Old City of Salamanca—World Heritage Site," Sustainability, MDPI, vol. 11(16), pages 1-14, August.
    12. Careddu, Nicola & Siotto, Giampaolo & Siotto, Riccardo & Tilocca, Caterina, 2013. "From landfill to water, land and life: The creation of the Centre for stone materials aimed at secondary processing," Resources Policy, Elsevier, vol. 38(3), pages 258-265.
    13. Filippo Carlo Pavesi & Anna Richiedei & Michele Pezzagno, 2021. "Advanced Modelling Tools to Support Planning for Sand/Gravel Quarries," Sustainability, MDPI, vol. 13(11), pages 1-14, June.
    14. António Mateus & Catarina Lopes & Luís Martins & Mário Abel Gonçalves, 2021. "Current and Foreseen Tungsten Production in Portugal, and the Need of Safeguarding the Access to Relevant Known Resources," Resources, MDPI, vol. 10(6), pages 1-26, June.
    15. Careddu, Nicola, 2019. "Dimension stones in the circular economy world," Resources Policy, Elsevier, vol. 60(C), pages 243-245.
    16. Nicola Careddu & Silvana Maria Grillo, 2019. "“Trachytes” from Sardinia: Geoheritage and Current Use," Sustainability, MDPI, vol. 11(13), pages 1-16, July.
    17. António Mateus & Luís Martins, 2021. "Building a mineral-based value chain in Europe: the balance between social acceptance and secure supply," Mineral Economics, Springer;Raw Materials Group (RMG);Luleå University of Technology, vol. 34(2), pages 239-261, July.
    18. Federico Vagnon & Giovanna Antonella Dino & Gessica Umili & Marilena Cardu & Anna Maria Ferrero, 2020. "New Developments for the Sustainable Exploitation of Ornamental Stone in Carrara Basin," Sustainability, MDPI, vol. 12(22), pages 1-23, November.
    19. Paweł Strzałkowski, 2021. "Characteristics of Waste Generated in Dimension Stone Processing," Energies, MDPI, vol. 14(21), pages 1-16, November.
    20. Macedo, Dione & Mori Junior, Renzo & Pimentel Mizusaki, Ana Maria, 2017. "Sustainability strategies for dimension stones industry based on Northwest region of Espírito Santo State, Brazil," Resources Policy, Elsevier, vol. 52(C), pages 207-216.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:jrpoli:v:68:y:2020:i:c:s0301420720303603. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/inca/30467 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.