IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v335y2025ics0360544225036175.html

Numerical study of the efficiency of an axial compressor rotor operating at low Reynolds numbers

Author

Listed:
  • Kapela, Natalia
  • Jójka, Joanna

Abstract

This paper presents numerical studies on an axial compressor rotor across 16 NACA65-based configurations. The study focuses on rotors with compression power below 100 kW, operating at Reynolds numbers under 750,000. Numerical simulations examined variations in blade angle, solidity, thickness, and rotor size using a validated numerical model. Performance maps were generated for each geometry at six rotor speeds to assess regulatory potential. Results show that rotors with high incidence angles offer the most flexibility, with efficiency losses under 18 % across the range. However, rotors with the highest blade angles had the lowest efficiency (90 %) and the steepest drop (53 %), indicating lower stability. Within the studied Reynolds range, primary losses stemmed from profile losses and boundary layer separation on the blade's suction side. Secondary effects, like tip leakage vortex and hub corner separation, had a less significant impact. Findings suggest that increasing Reynolds numbers through rotor size expansion has less impact on efficiency than increasing it via a broader speed range. This insight aids in designing more efficient axial compressors, optimizing regulatory control while minimizing efficiency losses.

Suggested Citation

  • Kapela, Natalia & Jójka, Joanna, 2025. "Numerical study of the efficiency of an axial compressor rotor operating at low Reynolds numbers," Energy, Elsevier, vol. 335(C).
  • Handle: RePEc:eee:energy:v:335:y:2025:i:c:s0360544225036175
    DOI: 10.1016/j.energy.2025.137975
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544225036175
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2025.137975?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. George Stamatellos & Olympia Zogou & Anastassios Stamatelos, 2021. "Energy Performance Optimization of a House with Grid-Connected Rooftop PV Installation and Air Source Heat Pump," Energies, MDPI, vol. 14(3), pages 1-23, January.
    2. Yang, Kang & Zhang, Naxin & Chen, Laijie & Qin, Zheng & Wang, Lintao & Dong, Keyong & Li, Hailiang & Li, Xinyu & Liu, Huimin & Song, Zhongshang & Fang, Zhenchang & Wang, Xuan & Qiao, Xinqi, 2025. "Performance analysis of a 100 kW S-CO2 centrifugal compressor: Design and experimental study," Energy, Elsevier, vol. 322(C).
    3. Shuxue, Xu & Qianqian, Gou & Guoyuan, Ma & Jianhui, Niu, 2025. "Research on operating characteristics of air source heat pump water heater based on dual cylinder compressor," Energy, Elsevier, vol. 324(C).
    4. Bamigbetan, Opeyemi & Eikevik, Trygve Magne & Nekså, Petter & Bantle, Michael & Schlemminger, Christian, 2019. "Experimental investigation of a prototype R-600 compressor for high temperature heat pump," Energy, Elsevier, vol. 169(C), pages 730-738.
    5. Sun, Ke & Lu, Huawei & Malik, Adil & Fan, Yingqi & Tian, Zhitao, 2024. "Effect of Reynolds number on the aerodynamic performance of highly loaded helium compressor cascade in high temperature gas-cooled reactor," Energy, Elsevier, vol. 289(C).
    6. Viana-Fons, Joan Dídac & Payá, Jorge, 2024. "HVAC system operation, consumption and compressor size optimization in urban buses of Mediterranean cities," Energy, Elsevier, vol. 296(C).
    7. Li, Zhihui & Liu, Yanming, 2017. "Blade-end treatment for axial compressors based on optimization method," Energy, Elsevier, vol. 126(C), pages 217-230.
    8. Olympios, Andreas V. & Song, Jian & Ziolkowski, Aleksander & Shanmugam, Vethalingam S. & Markides, Christos N., 2024. "Data-driven compressor performance maps and cost correlations for small-scale heat-pumping applications," Energy, Elsevier, vol. 291(C).
    9. Liu, Yishuang & Qu, Shengli & Shen, Shaofeng & Feng, Yiwei & Sun, Tianrui & Wang, Chuang & Xing, Ziwen, 2025. "Experimental investigation on the large temperature lift heat pump with an integrated two-stage independently variable frequency compressor," Energy, Elsevier, vol. 314(C).
    10. Li, Zhaohua & Ji, Zhongfu & Yan, Zhe & Hu, Binbin & Liu, Tao & Chen, Xinwen & Liang, Kun, 2025. "Efficiency analysis of a R290 heat pump system using linear compressor with different piston offset control methods," Energy, Elsevier, vol. 330(C).
    11. Feng, Yiwei & Li, Yanpeng & Qu, Shengli & Wang, Chuang & Han, Yaoxiang & Xing, Ziwen, 2025. "Energy savings of multi-chiller systems comprising hybrid-type compressors combined with thermal energy storage technology: Focusing on compressor isentropic efficiency," Energy, Elsevier, vol. 325(C).
    12. Deng, Hangwen & Luo, Lei & Yan, Han & Zhou, Xun & Du, Wei & Luo, Qiao, 2025. "Experimental and numerical study on a three-stage high-load axial compressor with 3D blade design," Energy, Elsevier, vol. 316(C).
    13. Yudong Xia & Shu Jiangzhou & Xuejun Zhang & Zhao Zhang, 2020. "Steady-State Performance Prediction for a Variable Speed Direct Expansion Air Conditioning System Using a White-Box Based Modeling Approach," Energies, MDPI, vol. 13(18), pages 1-17, September.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yuan, Wei & Lu, Xiangwu & Feng, Xueheng & Zhang, Qian & Zhang, Lei, 2026. "Influence of inlet distortion on stall inception in supercritical CO2 compressor," Energy, Elsevier, vol. 347(C).
    2. Mariusz Niekurzak & Wojciech Lewicki & Wojciech Drożdż & Paweł Miązek, 2022. "Measures for Assessing the Effectiveness of Investments for Electricity and Heat Generation from the Hybrid Cooperation of a Photovoltaic Installation with a Heat Pump on the Example of a Household," Energies, MDPI, vol. 15(16), pages 1-20, August.
    3. Wu, Di & Jiang, Jiatong & Hu, Bin & Wang, R.Z. & Sun, Yan, 2024. "Experimental investigation and industrial application of a cascade air-source high temperature heat pump," Renewable Energy, Elsevier, vol. 232(C).
    4. Mariusz Niekurzak & Jerzy Mikulik, 2023. "Business Models in Terms of the Strategy for Sustainable Management in Economic Entities Taking into Account Energy Transformation," Energies, MDPI, vol. 16(11), pages 1-17, May.
    5. Gao, J.T. & Xu, Z.Y. & Wang, R.Z., 2021. "An air-source hybrid absorption-compression heat pump with large temperature lift," Applied Energy, Elsevier, vol. 291(C).
    6. Shi, Liubao & Zhang, Zhihao & He, Guogeng & Hua, Jialiang & Wang, Xingmin & Li, Ruikang & Lv, Ruiting, 2025. "A comprehensive analysis of novel environmentally friendly refrigerants in high-temperature heat pumps for industrial heating," Energy, Elsevier, vol. 341(C).
    7. Liu, Yishuang & Qu, Shengli & Shen, Shaofeng & Feng, Yiwei & Sun, Tianrui & Wang, Chuang & Xing, Ziwen, 2025. "Experimental investigation on the large temperature lift heat pump with an integrated two-stage independently variable frequency compressor," Energy, Elsevier, vol. 314(C).
    8. Mateu-Royo, Carlos & Navarro-Esbrí, Joaquín & Mota-Babiloni, Adrián & Molés, Francisco & Amat-Albuixech, Marta, 2019. "Experimental exergy and energy analysis of a novel high-temperature heat pump with scroll compressor for waste heat recovery," Applied Energy, Elsevier, vol. 253(C), pages 1-1.
    9. Aunedi, Marko & Olympios, Andreas V. & Pantaleo, Antonio M. & Mersch, Matthias & Markides, Christos N., 2025. "System-level techno-economic comparison of residential low-carbon heating and cooling solutions," Energy, Elsevier, vol. 317(C).
    10. Tongchana Thongtip & Natthawut Ruangtrakoon, 2021. "Real Air-Conditioning Performance of Ejector Refrigerator Based Air-Conditioner Powered by Low Temperature Heat Source," Energies, MDPI, vol. 14(3), pages 1-20, January.
    11. Cholewa, Tomasz & Bejan, Andrei-Stelian & Miara, Marek & Schauer, Christian & Kosonen, Risto & Borodiņecs, Anatolijs & Bogdanovičs, Raimonds & Amanowicz, Łukasz & Vering, Christian & Siuta-Olcha, Alic, 2025. "Critical discussion on the challenges of integrating heat pumps in hydronic systems in existing buildings," Energy, Elsevier, vol. 326(C).
    12. Hu, Bin & Xu, Liang & Xiang, Bo & Shi, Lijun & Jiang, Shuai & Jia, Jikang & Lv, Yongji & Tan, Maoxin & Si, Pengfei, 2025. "Experimental study on a direct steam generation unit of high temperature air source heat pump," Energy, Elsevier, vol. 330(C).
    13. Meriläinen, Altti & Jaatinen-Värri, Ahti & Uusitalo, Antti & Kosonen, Antti & Jokisalo, Juha & Kosonen, Risto & Kauranen, Pertti & Ahola, Jero, 2026. "Integration of water electrolysis and district heating through waste heat recovery in Nordic conditions: Techno-economic impacts of lowering the district heating network temperature," Energy, Elsevier, vol. 344(C).
    14. Jiang, Jiatong & Hu, Bin & Wang, R.Z. & Deng, Na & Cao, Feng & Wang, Chi-Chuan, 2022. "A review and perspective on industry high-temperature heat pumps," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    15. Paula Sankelo & Kaiser Ahmed & Alo Mikola & Jarek Kurnitski, 2022. "Renovation Results of Finnish Single-Family Renovation Subsidies: Oil Boiler Replacement with Heat Pumps," Energies, MDPI, vol. 15(20), pages 1-18, October.
    16. Gómez-Hernández, J. & Grimes, R. & Briongos, J.V. & Marugán-Cruz, C. & Santana, D., 2023. "Carbon dioxide and acetone mixtures as refrigerants for industry heat pumps to supply temperature in the range 150–220 oC," Energy, Elsevier, vol. 269(C).
    17. Liu, Yishuang & Wang, Bingdong & Wang, Chuang & Liu, Lixin & Sun, Tianrui & Han, Yaoxiang & Xing, Ziwen, 2025. "Performance comparison of direct and flash steam generating heat pump using R1233zd(E) for waste heat recovery," Energy, Elsevier, vol. 326(C).
    18. Wang, He & Lu, Daogang & Xu, Chao & Cao, Qiong & Li, Zhen & Fan, Cheng & Lin, Manjiao, 2025. "Study on flow and heat transfer characteristics of helium-xenon mixtures in airfoil-fin PCHEs with different cross-sectional parameters," Energy, Elsevier, vol. 325(C).
    19. Ji, Qiang & Che, Chunwen & Yin, Yonggao & Huang, Gongsheng & Pan, Tengxiang & Zhao, Donglin & Wang, Yikai, 2024. "Optimizing working fluids for advancing industrial heating performance of compression-absorption cascade heat pump," Applied Energy, Elsevier, vol. 376(PB).
    20. Yoo, JunSoo & Estrada-Perez, Carlos E. & Choi, Byung-Hee, 2025. "Investigation of heat pump technologies for high-temperature applications above 250 °C," Applied Energy, Elsevier, vol. 384(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;
    ;
    ;
    ;

    JEL classification:

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:335:y:2025:i:c:s0360544225036175. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.