IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v320y2025ics0360544225008813.html
   My bibliography  Save this article

Thermodynamic modeling and performance analysis of RBCC engine ejector mode considering the inlet forebody drag

Author

Listed:
  • Huang, Qian
  • Lv, Chengkun
  • Li, Danwei
  • Gong, Changjiang
  • Chang, Juntao
  • Yu, Daren

Abstract

The inlet forebody drag (FD) in the ejector mode of an RBCC engine is a crucial factor limiting the engine's net thrust performance. To gain deeper insights of how FD affects net thrust performance, this study developed a thermodynamic model of an RBCC engine that includes forebody drag calculations. Based on the simplifications and assumptions about the characteristics of wave system structures, the model subdivides the velocity range of Ma1.5-2 into two sub-ranges. Using this model, the basic characteristics of FD and engine performance changes within the velocity range under various conditions were analyzed. Results show that FD increases with rocket mainstream flow, decreases with divergent section expansion ratio (ER), and first decreases then increases with secondary fuel equivalence ratio (φ). Engine net thrust (Fnet) increases with rocket mainstream flow and ER, but first increases then decreases with φ. Finally, a genetic algorithm was used to obtain the optimal trend of the φ corresponding to Max-Fnet, Max-Ispnet, and Min-FD within the Ma1.5-2. This paper aims to provide insights into the complex interactions between forebody drag, engine performance, and various influencing factors in the RBCC engines ejector mode, thereby contributing to the optimization and improvement of engine performance.

Suggested Citation

  • Huang, Qian & Lv, Chengkun & Li, Danwei & Gong, Changjiang & Chang, Juntao & Yu, Daren, 2025. "Thermodynamic modeling and performance analysis of RBCC engine ejector mode considering the inlet forebody drag," Energy, Elsevier, vol. 320(C).
    • Handle: RePEc:eee:energy:v:320:y:2025:i:c:s0360544225008813
    DOI: 10.1016/j.energy.2025.135239
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544225008813
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2025.135239?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to

    for a different version of it.

    References listed on IDEAS

    as
    1. Chen, Jikai & Sun, Mingbo & Li, Peibo & An, Bin & Jiaoru, Wang & Li, Menglei, 2024. "Effects of excess oxidizer coefficient on RBCC engine performance in ejector mode: A theoretical investigation," Energy, Elsevier, vol. 289(C).
    2. Zhang, Tiantian & Wang, Zhenguo & Huang, Wei & Ingham, Derek & Ma, Lin & Porkashanian, Mohamed, 2020. "An analysis tool of the rocket-based combined cycle engine and its application in the two-stage-to-orbit mission," Energy, Elsevier, vol. 193(C).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Wujie & Xu, Liangze & Zhang, Jiaxu & Zheng, Zhaoqi & Miao, Ruijiao & Huang, Yonghua, 2025. "Multi-objective optimization of cryogenic propellant zero boil-off storage: Modeling, optimization method and performance enhancement," Energy, Elsevier, vol. 320(C).
    2. Liu, Yunfeng & Han, Xin & Zhang, Zijian, 2024. "Study on the propulsive performance of oblique detonation engine," Energy, Elsevier, vol. 292(C).
    3. Leng, Jun-xue & Wang, Zhen-guo & Huang, Wei, 2024. "Design and investigation on the combined two-stage waverider equipped with rocket and scramjet engine," Energy, Elsevier, vol. 304(C).
    4. Zhang, Kai & Yu, Xuanfei & Zhang, Duo & Guo, Jian & Qin, Fei, 2025. "Evaluation of multi-mode shared combustor with different flame holder designs for an innovative turbo-ramjet combined cycle engine," Energy, Elsevier, vol. 323(C).
    5. Wang, Youyin & Hou, Wenxin & Zhang, Junlong & Tang, Jingfeng & Chang, Juntao & Bao, Wen, 2021. "Research on the operating boundary of the dual mode scramjet with a constant area combustor through thermodynamic cycle analysis," Energy, Elsevier, vol. 216(C).
    6. Zhang, Wujie & Wang, Bin & Zhang, Hao & Jiang, Wenbing & Miao, Ruijiao & Xu, Anyi & Li, Peng & Sun, Peijie & Huang, Yonghua, 2024. "Self-pressurization behavior and zero boil-off feasibility of LOX/LCH4 pair stored in a single-layer metal common bulkhead tank," Energy, Elsevier, vol. 312(C).
    7. Chen, Jikai & Sun, Mingbo & Li, Peibo & An, Bin & Jiaoru, Wang & Li, Menglei, 2024. "Effects of excess oxidizer coefficient on RBCC engine performance in ejector mode: A theoretical investigation," Energy, Elsevier, vol. 289(C).
    8. Ambe Verma, Kumari & Murari Pandey, Krishna & Ray, Mukul & Kumar Sharma, Kaushal, 2021. "Effect of transverse fuel injection system on combustion efficiency in scramjet combustor," Energy, Elsevier, vol. 218(C).
    9. Ren, Zhipeng & Li, Deyou & Li, Zhipeng & Wang, Hongjie & Liu, Jintao & Qu, Zhen & Li, Yong, 2024. "Spatial-temporal evolution mechanism of mass transfer under synergetic gaseous and vapour cavitating effects in a micropump," Energy, Elsevier, vol. 286(C).
    10. Yan, Li & Liao, Lei & Meng, Yu-shan & Li, Shi-bin & Huang, Wei, 2020. "Investigation on the mode transition of a typical three-dimensional scramjet combustor equipped with a strut," Energy, Elsevier, vol. 208(C).
    11. Zhang, Tiantian & Yan, Xiaoting & Huang, Wei & Che, Xueke & Wang, Zhenguo, 2021. "Multidisciplinary design optimization of a wide speed range vehicle with waveride airframe and RBCC engine," Energy, Elsevier, vol. 235(C).
    12. Leng, Jun-xue & Shen, Yang & Wang, Zhen-guo & Huang, Wei, 2025. "Investigation on factors influencing the range of boost-glide-cruise combined trajectories for scramjet-powered vehicles," Energy, Elsevier, vol. 317(C).

    More about this item

    Keywords

    ;
    ;
    ;
    ;

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:320:y:2025:i:c:s0360544225008813. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.