IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v236y2021ics0360544221016005.html
   My bibliography  Save this article

Numerical simulation of CO formation and reduction on flame propagation due to heat loss through the cooled wall

Author

Listed:
  • Yunoki, Keita
  • Kai, Reo
  • Inoue, Shinpei
  • Kurose, Ryoichi

Abstract

To realize further low carbon monoxide (CO) emissions for industrial gas turbine combustors, the elucidation of the CO formation and reduction mechanism for lean premixed combustion is crucial. In this study, one-dimensional numerical simulations using a detailed reaction mechanism approach and two-dimensional numerical simulations using a detailed reaction mechanism approach or a non-adiabatic flamelet generated manifolds (NA-FGM) approach are applied to CH4-air premixed flames near a cooled wall. The effects of the equivalence ratio (0.5, 0.7 and 1.0), pressure (0.1 and 2.0 MPa), and wall temperature (300 and 750 K) on the CO emissions is investigated. The results indicate that the influence of the wall temperature is the most significant on the CO reduction rate. For the lower wall temperature, the CO reduction rate in the vicinity of the cooled wall becomes lower, thereby has a risk to increase the CO emissions. At the pressure of 2.0 MPa and the equivalence ratio of 0.5, the CO reduction rate at a wall temperature of 300 K is only 16.8% of that at a wall temperature of 750 K. This suggests that the control of heat loss through the wall could be key to effectively reducing the CO emissions from combustors.

Suggested Citation

  • Yunoki, Keita & Kai, Reo & Inoue, Shinpei & Kurose, Ryoichi, 2021. "Numerical simulation of CO formation and reduction on flame propagation due to heat loss through the cooled wall," Energy, Elsevier, vol. 236(C).
  • Handle: RePEc:eee:energy:v:236:y:2021:i:c:s0360544221016005
    DOI: 10.1016/j.energy.2021.121352
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221016005
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2021.121352?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:236:y:2021:i:c:s0360544221016005. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.