IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v121y2017icp10-20.html
   My bibliography  Save this article

Detailed kinetic modeling of acetylene decomposition/soot formation during quenching of coal pyrolysis in thermal plasma

Author

Listed:
  • Yan, Binhang
  • Cheng, Yan
  • Li, Tianyang
  • Cheng, Yi

Abstract

A detailed chemical kinetic mechanism based on the Appel-Bockhorn-Frenklach (ABF) model was established to describe acetylene decomposition, ethylene formation, and soot formation during quenching in coal pyrolysis to acetylene process. The predictions agreed well with the reported acetylene pyrolysis experimental data. Numerical simulations were then performed to deeply understand the reaction behaviors during quenching of coal pyrolysis in thermal plasma, and to optimize the quenching design for better heat recovery. Two key operating parameters of quenching, i.e., the temperature after quenching and the quenching rate, were studied in detail and optimized after the kinetics were validated. The simulation results also proved that hydrogen can promote the formation of ethylene and inhibit the condensation of acetylene during quenching. In particular, in-depth discussion of acetylene decomposition and ethylene formation using this detailed kinetic mechanism combined with thermodynamic method provided a comprehensive understanding of the thermodynamics and kinetics interpreting pilot plant experimental data.

Suggested Citation

  • Yan, Binhang & Cheng, Yan & Li, Tianyang & Cheng, Yi, 2017. "Detailed kinetic modeling of acetylene decomposition/soot formation during quenching of coal pyrolysis in thermal plasma," Energy, Elsevier, vol. 121(C), pages 10-20.
  • Handle: RePEc:eee:energy:v:121:y:2017:i:c:p:10-20
    DOI: 10.1016/j.energy.2016.12.130
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544216319442
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2016.12.130?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sánchez, N.E. & Callejas, A. & Millera, A. & Bilbao, R. & Alzueta, M.U., 2012. "Formation of PAH and soot during acetylene pyrolysis at different gas residence times and reaction temperatures," Energy, Elsevier, vol. 43(1), pages 30-36.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liu, Rongtang & Liu, Ming & Fan, Peipei & Zhao, Yongliang & Yan, Junjie, 2018. "Thermodynamic study on a novel lignite poly-generation system of electricity-gas-tar integrated with pre-drying and pyrolysis," Energy, Elsevier, vol. 165(PB), pages 140-152.
    2. Kang, Yinhu & Sun, Yuming & Lu, Xiaofeng & Gou, Xiaolong & Sun, Sicong & Yan, Jin & Song, Yangfan & Zhang, Pengyuan & Wang, Quanhai & Ji, Xuanyu, 2018. "Soot formation characteristics of ethylene premixed burner-stabilized stagnation flame with dimethyl ether addition," Energy, Elsevier, vol. 150(C), pages 709-721.
    3. Yangxun Liu & Weinan Liu & Huihong Liao & Wenhua Zhou & Cangsu Xu, 2021. "An Experimental and Kinetic Modelling Study on Laminar Premixed Flame Characteristics of Ethanol/Acetone Mixtures," Energies, MDPI, vol. 14(20), pages 1-18, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kang, Yinhu & Sun, Yuming & Lu, Xiaofeng & Gou, Xiaolong & Sun, Sicong & Yan, Jin & Song, Yangfan & Zhang, Pengyuan & Wang, Quanhai & Ji, Xuanyu, 2018. "Soot formation characteristics of ethylene premixed burner-stabilized stagnation flame with dimethyl ether addition," Energy, Elsevier, vol. 150(C), pages 709-721.
    2. Arnal, C. & Alzueta, M.U. & Millera, A. & Bilbao, R., 2012. "Influence of water vapor addition on soot oxidation at high temperature," Energy, Elsevier, vol. 43(1), pages 55-63.
    3. Zhang, Yindi & Liu, Fengshan & Clavel, Daniel & Smallwood, Gregory J. & Lou, Chun, 2019. "Measurement of soot volume fraction and primary particle diameter in oxygen enriched ethylene diffusion flames using the laser-induced incandescence technique," Energy, Elsevier, vol. 177(C), pages 421-432.
    4. Luo, Minye & Liu, Dong, 2018. "Effects of dimethyl ether addition on soot formation, evolution and characteristics in flame-wall interactions," Energy, Elsevier, vol. 164(C), pages 642-654.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:121:y:2017:i:c:p:10-20. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.