IDEAS home Printed from https://ideas.repec.org/p/hal/journl/hal-01965596.html
   My bibliography  Save this paper

Financial performance, environmental compliance, and social outcomes: The three challenges of reverse logistics

Author

Listed:
  • Pauline Keh

    (MRM - Montpellier Research in Management - UM1 - Université Montpellier 1 - UPVM - Université Paul-Valéry - Montpellier 3 - UM2 - Université Montpellier 2 - Sciences et Techniques - UPVD - Université de Perpignan Via Domitia - Groupe Sup de Co Montpellier (GSCM) - Montpellier Business School)

  • Florence Rodhain

    (MRM - Montpellier Research in Management - UM1 - Université Montpellier 1 - UPVM - Université Paul-Valéry - Montpellier 3 - UM2 - Université Montpellier 2 - Sciences et Techniques - UPVD - Université de Perpignan Via Domitia - Groupe Sup de Co Montpellier (GSCM) - Montpellier Business School)

  • Régis Meissonier

    (CRIISEA - Centre de Recherche sur les Institutions, l'Industrie et les Systèmes Économiques d'Amiens - UR UPJV 3908 - UPJV - Université de Picardie Jules Verne)

  • Virginie Llorca

    (IBM - IBM France - IBM)

Abstract

For economic, legal, or strategic reasons, manufacturers of electrical and electronic equipment (EEE) are increasingly managing end-of-life product cycles by choosing a recovery option: refurbishing, remanufacturing, and recycling. Reverse logistics is a process in which manufacturers collect their used products for possible revalorization, recycling, or disposal. Some authors consider that this activity is an opportunity to achieve a triple bottom line-economics, environment, and social-benefit. However, beyond hypothetical assumptions, little empirical research provides practical knowledge about the way such a challenge can be met. The aim of this article is thus to provide some grounding for this proposal. Based on an IBM Montpellier case study, this article examines how an integrated reverse logistics model can enable companies to meet three main objectives:(1) Provide economic opportunities through the resale or reuse of machines and parts, (2) successfully deal with environmental challenges such as waste management and legislation compliance, and (3) achieve an important social challenge in terms of local job preservation.

Suggested Citation

  • Pauline Keh & Florence Rodhain & Régis Meissonier & Virginie Llorca, 2012. "Financial performance, environmental compliance, and social outcomes: The three challenges of reverse logistics," Post-Print hal-01965596, HAL.
    • Handle: RePEc:hal:journl:hal-01965596
    DOI: 10.1080/16258312.2012.11517296
    Note: View the original document on HAL open archive server: https://hal.science/hal-01965596
    as

    Download full text from publisher

    File URL: https://hal.science/hal-01965596/document
    Download Restriction: no
    File URL: https://libkey.io/10.1080/16258312.2012.11517296?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. de la Fuente, M. Victoria & Ros, Lorenzo & Cardos, Manuel, 2008. "Integrating Forward and Reverse Supply Chains: Application to a metal-mechanic company," International Journal of Production Economics, Elsevier, vol. 111(2), pages 782-792, February.
    2. Kumar, Sameer & Putnam, Valora, 2008. "Cradle to cradle: Reverse logistics strategies and opportunities across three industry sectors," International Journal of Production Economics, Elsevier, vol. 115(2), pages 305-315, October.
    3. Moritz Fleischmann & Jo A. E. E. van Nunen & Ben Gräve, 2003. "Integrating Closed-Loop Supply Chains and Spare-Parts Management at IBM," Interfaces, INFORMS, vol. 33(6), pages 44-56, December.
    4. de Brito, M.P. & Dekker, R., 2002. "Reverse logistics - a framework," Econometric Institute Research Papers EI 2002-38, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    5. Kristin Sahyouni & R. Canan Savaskan & Mark S. Daskin, 2007. "A Facility Location Model for Bidirectional Flows," Transportation Science, INFORMS, vol. 41(4), pages 484-499, November.
    6. de Brito, M.P. & Flapper, S.D.P. & Dekker, R., 2002. "Reverse logistics," Econometric Institute Research Papers EI 2002-21, Erasmus University Rotterdam, Erasmus School of Economics (ESE), Econometric Institute.
    7. Bob Giddings & Bill Hopwood & Geoff O'Brien, 2002. "Environment, economy and society: fitting them together into sustainable development," Sustainable Development, John Wiley & Sons, Ltd., vol. 10(4), pages 187-196.
    8. Fuller, Donald A., 1978. "Recycling consumer solid waste: A commentary on selected channel alternatives," Journal of Business Research, Elsevier, vol. 6(1), pages 17-31, January.
    9. François Partant, 1984. "La crise du développement dans la crise mondiale," Revue Tiers Monde, Programme National Persée, vol. 25(100), pages 809-815.
    10. V Jayaraman & V D R Guide & R Srivastava, 1999. "A closed-loop logistics model for remanufacturing," Journal of the Operational Research Society, Palgrave Macmillan;The OR Society, vol. 50(5), pages 497-508, May.
    11. Fleischmann, Mortiz & Krikke, Hans Ronald & Dekker, Rommert & Flapper, Simme Douwe P., 2000. "A characterisation of logistics networks for product recovery," Omega, Elsevier, vol. 28(6), pages 653-666, December.
    12. Jacques Lauriol, 2004. "Le développement durable à la recherche d'un corps de doctrine," Post-Print hal-00566588, HAL.
    13. Ellinger, Alexandeer E. & Daugherty, Patricia J. & Gustin, Craig M., 1997. "The relationship between integrated logistics and customer service," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 33(2), pages 129-138, June.
    14. Georgiadis, Patroklos & Athanasiou, Efstratios, 2010. "The impact of two-product joint lifecycles on capacity planning of remanufacturing networks," European Journal of Operational Research, Elsevier, vol. 202(2), pages 420-433, April.
    15. Laoucine Kerbache & Shumail Mazahir & Marc Lassagne, 2011. "Reverse Logistics and Push-Pull Manufacturing Systems: The Case of Electronic Products," Post-Print hal-00629690, HAL.
    16. de Brito, Marisa P. & van der Laan, Erwin A., 2009. "Inventory control with product returns: The impact of imperfect information," European Journal of Operational Research, Elsevier, vol. 194(1), pages 85-101, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jean-Robert Agher & Patrice Dubois & Améziane Aoussat, 2021. "A Bibliometric Analysis of Product-Service Systems’ Design Methodologies: Potential Root-Cause Identification of PSS’ Failures," Sustainability, MDPI, vol. 13(11), pages 1-23, June.
    2. Jean-Robert Agher & Patrice Dubois & Améziane Aoussat, 2021. "A Bibliometric Analysis of Product-Service Systems’ Design Methodologies: Potential Root-Cause Identification of PSS’ Failures," Post-Print hal-03983127, HAL.
    3. Maric, Josip & Rodhain, Florence & Barlette, Yves, 2014. "Information Systems and Reverse Logistics: Examining Drivers of Implementation on Multiple Case Study Scenario," Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL), in: Kersten, Wolfgang & Blecker, Thorsten & Ringle, Christian M. (ed.), Next Generation Supply Chains: Trends and Opportunities. Proceedings of the Hamburg International Conference of Logistics (HICL), Vol. 18, volume 18, pages 211-221, Hamburg University of Technology (TUHH), Institute of Business Logistics and General Management.
    4. Josip Maric & Florence Rodhain & Yves Barlette, 2014. "Information Systems and Reverse Logistics: Examining Drivers of Implementation on Multiple Case Study Scenario," Post-Print hal-01967336, HAL.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Josip Marić & Marco Opazo-Basáez, 2019. "Green Servitization for Flexible and Sustainable Supply Chain Operations: A Review of Reverse Logistics Services in Manufacturing," Global Journal of Flexible Systems Management, Springer;Global Institute of Flexible Systems Management, vol. 20(1), pages 65-80, December.
    2. Agrawal, Saurabh & Singh, Rajesh K. & Murtaza, Qasim, 2015. "A literature review and perspectives in reverse logistics," Resources, Conservation & Recycling, Elsevier, vol. 97(C), pages 76-92.
    3. Govindan, Kannan & Soleimani, Hamed & Kannan, Devika, 2015. "Reverse logistics and closed-loop supply chain: A comprehensive review to explore the future," European Journal of Operational Research, Elsevier, vol. 240(3), pages 603-626.
    4. Agrawal, Saurabh & Singh, Rajesh K. & Murtaza, Qasim, 2016. "Outsourcing decisions in reverse logistics: Sustainable balanced scorecard and graph theoretic approach," Resources, Conservation & Recycling, Elsevier, vol. 108(C), pages 41-53.
    5. Pokharel, Shaligram & Mutha, Akshay, 2009. "Perspectives in reverse logistics: A review," Resources, Conservation & Recycling, Elsevier, vol. 53(4), pages 175-182.
    6. Kalogerakis, Katharina & Drabe, Viktoria & Paramasivam, Mugundan & Herstatt, Cornelius, 2015. "Closed-Loop Supply Chains for Cradle to Cradle Products," Chapters from the Proceedings of the Hamburg International Conference of Logistics (HICL), in: Kersten, Wolfgang & Blecker, Thorsten & Ringle, Christian M. (ed.), Sustainability in Logistics and Supply Chain Management: New Designs and Strategies. Proceedings of the Hamburg International Conference of Logistics , volume 21, pages 3-34, Hamburg University of Technology (TUHH), Institute of Business Logistics and General Management.
    7. Abdelkader Sbihi & Richard Eglese, 2010. "Combinatorial optimization and Green Logistics," Annals of Operations Research, Springer, vol. 175(1), pages 159-175, March.
    8. Srivastava, Samir K., 2008. "Network design for reverse logistics," Omega, Elsevier, vol. 36(4), pages 535-548, August.
    9. Muhammad Waqas & Qian-li Dong & Naveed Ahmad & Yuming Zhu & Muhammad Nadeem, 2018. "Critical Barriers to Implementation of Reverse Logistics in the Manufacturing Industry: A Case Study of a Developing Country," Sustainability, MDPI, vol. 10(11), pages 1-25, November.
    10. Wenyuan Wang & Daniel Y. Mo & Yue Wang & Mitchell M. Tseng, 2019. "Assessing the cost structure of component reuse in a product family for remanufacturing," Journal of Intelligent Manufacturing, Springer, vol. 30(2), pages 575-587, February.
    11. Genc, Talat S. & Giovanni, Pietro De, 2017. "Trade-in and save: A two-period closed-loop supply chain game with price and technology dependent returns," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 514-527.
    12. Özceylan, Eren & Paksoy, Turan & Bektaş, Tolga, 2014. "Modeling and optimizing the integrated problem of closed-loop supply chain network design and disassembly line balancing," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 61(C), pages 142-164.
    13. Schweiger, Katharina & Sahamie, Ramin, 2013. "A hybrid Tabu Search approach for the design of a paper recycling network," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 50(C), pages 98-119.
    14. De Giovanni, Pietro & Zaccour, Georges, 2014. "A two-period game of a closed-loop supply chain," European Journal of Operational Research, Elsevier, vol. 232(1), pages 22-40.
    15. Hong, I-Hsuan & Ammons, Jane C. & Realff, Matthew J., 2008. "Decentralized decision-making and protocol design for recycled material flows," International Journal of Production Economics, Elsevier, vol. 116(2), pages 325-337, December.
    16. S. Maryam Masoumi & Nima Kazemi & Salwa Hanim Abdul-Rashid, 2019. "Sustainable Supply Chain Management in the Automotive Industry: A Process-Oriented Review," Sustainability, MDPI, vol. 11(14), pages 1-30, July.
    17. Min, Hokey & Ko, Hyun-Jeung, 2008. "The dynamic design of a reverse logistics network from the perspective of third-party logistics service providers," International Journal of Production Economics, Elsevier, vol. 113(1), pages 176-192, May.
    18. Liao, Haolan & Zhang, Qingyu & Li, Lu, 2023. "Optimal procurement strategy for multi-echelon remanufacturing systems under quality uncertainty," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 170(C).
    19. Alena Klapalová, 2012. "Reverse logistics and 3PL in the Czech Republic," Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, Mendel University Press, vol. 60(7), pages 163-170.
    20. Duong, Quang Huy & Zhou, Li & Meng, Meng & Nguyen, Truong Van & Ieromonachou, Petros & Nguyen, Duy Tiep, 2022. "Understanding product returns: A systematic literature review using machine learning and bibliometric analysis," International Journal of Production Economics, Elsevier, vol. 243(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:hal:journl:hal-01965596. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: CCSD (email available below). General contact details of provider: https://hal.archives-ouvertes.fr/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.