IDEAS home Printed from https://ideas.repec.org/a/taf/japsta/v37y2010i3p461-472.html
   My bibliography  Save this article

A note on some modified Pulak and Al-Sultan's model

Author

Listed:
  • Chung-Ho Chen

Abstract

Pulak and Al-Sultan presented a rectifying inspection plan applying in the determination of optimum process mean. However, they did not point out whether the non-conforming items in the sample of accepted lot are replaced or eliminated from the lot and neglected the quality loss within specification limits. In this paper, we further propose the modified Pulak and Al-Sultan model with quadratic quality loss function. There are four cases considered in the modified model: (1) the non-conforming items in the sample of accepted lot are neither replaced nor eliminated from the lot; (2) the non-conforming items in the sample of accepted lot are not replaced but are eliminated from the lot; (3) the non-conforming items in the sample of accepted lot are replaced by conforming ones; (4) the non-conforming items in the sample of accepted lot are replaced by non-inspected items. The numerical results and sensitivity analysis of parameters show that their solutions are slightly different.

Suggested Citation

  • Chung-Ho Chen, 2010. "A note on some modified Pulak and Al-Sultan's model," Journal of Applied Statistics, Taylor & Francis Journals, vol. 37(3), pages 461-472.
    • Handle: RePEc:taf:japsta:v:37:y:2010:i:3:p:461-472
    DOI: 10.1080/02664760902729658
    as

    Download full text from publisher

    File URL: http://www.tandfonline.com/doi/abs/10.1080/02664760902729658
    Download Restriction: Access to full text is restricted to subscribers.
    File URL: https://libkey.io/10.1080/02664760902729658?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hariga, Moncer A. & Al-Fawzan, M.A., 2005. "Joint determination of target value and production run for a process with multiple markets," International Journal of Production Economics, Elsevier, vol. 96(2), pages 201-212, May.
    2. Carlsson, Olle, 1989. "Economic selection of a process level under acceptance sampling by variables," Engineering Costs and Production Economics, Elsevier, vol. 16(1), pages 69-78, February.
    3. Chen, Chung-Ho & Lai, Min-Tsai, 2007. "Determining the optimum process mean based on quadratic quality loss function and rectifying inspection plan," European Journal of Operational Research, Elsevier, vol. 182(2), pages 755-763, October.
    4. Bowling, Shannon R. & Khasawneh, Mohammad T. & Kaewkuekool, Sittichai & Cho, Byung Rae, 2004. "A Markovian approach to determining optimum process target levels for a multi-stage serial production system," European Journal of Operational Research, Elsevier, vol. 159(3), pages 636-650, December.
    5. Pulak, M. F. S. & Al-Sultan, K. S., 1996. "The optimum targeting for a single filling operation with rectifying inspection," Omega, Elsevier, vol. 24(6), pages 727-733, December.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chen, Chung-Ho & Lai, Min-Tsai, 2007. "Determining the optimum process mean based on quadratic quality loss function and rectifying inspection plan," European Journal of Operational Research, Elsevier, vol. 182(2), pages 755-763, October.
    2. Chen, Chung-Ho & Lai, Min-Tsai, 2007. "Economic manufacturing quantity, optimum process mean, and economic specification limits setting under the rectifying inspection plan," European Journal of Operational Research, Elsevier, vol. 183(1), pages 336-344, November.
    3. Darwish, M.A. & Abdulmalek, F. & Alkhedher, M., 2013. "Optimal selection of process mean for a stochastic inventory model," European Journal of Operational Research, Elsevier, vol. 226(3), pages 481-490.
    4. Dodd, Christopher S. & Scanlan, James & Wiseall, Steve, 2021. "Generalising optimal mean setting for any number and combination of serial and parallel manufacturing operations," International Journal of Production Economics, Elsevier, vol. 236(C).
    5. Mohammad A. M. Abdel-Aal & Shokri Z. Selim, 2019. "A Generalized Process Targeting Model and an Application Involving a Production Process with Multiple Products," Mathematics, MDPI, vol. 7(8), pages 1-17, August.
    6. Raza, Syed Asif & Turiac, Mihaela, 2016. "Joint optimal determination of process mean, production quantity, pricing, and market segmentation with demand leakage," European Journal of Operational Research, Elsevier, vol. 249(1), pages 312-326.
    7. Bera, Sasadhar & Mukherjee, Indrajit, 2016. "A multistage and multiple response optimization approach for serial manufacturing system," European Journal of Operational Research, Elsevier, vol. 248(2), pages 444-452.
    8. Pulak, M. F. S. & Al-Sultan, K. S., 1996. "The optimum targeting for a single filling operation with rectifying inspection," Omega, Elsevier, vol. 24(6), pages 727-733, December.
    9. Shin, Sangmun & Kongsuwon, Pauline & Cho, Byung Rae, 2010. "Development of the parametric tolerance modeling and optimization schemes and cost-effective solutions," European Journal of Operational Research, Elsevier, vol. 207(3), pages 1728-1741, December.
    10. Darwish, M.A., 2009. "Economic selection of process mean for single-vendor single-buyer supply chain," European Journal of Operational Research, Elsevier, vol. 199(1), pages 162-169, November.
    11. Hong, Sung Hoon & Cho, Byung Rae, 2007. "Joint optimization of process target mean and tolerance limits with measurement errors under multi-decision alternatives," European Journal of Operational Research, Elsevier, vol. 183(1), pages 327-335, November.
    12. Michal Penn & Tal Raviv, 2007. "Optimizing the quality control station configuration," Naval Research Logistics (NRL), John Wiley & Sons, vol. 54(3), pages 301-314, April.
    13. Lee, Min Koo & Jang, Joong Soon, 1997. "The optimum target values for a production process with three-class screening," International Journal of Production Economics, Elsevier, vol. 49(2), pages 91-99, April.
    14. Al-Sultan, K. S. & Pulak, M. F. S., 2000. "Optimum target values for two machines in series with 100% inspection," European Journal of Operational Research, Elsevier, vol. 120(1), pages 181-189, January.
    15. Roan, Jinshyang & Gong, Linguo & Tang, Kwei, 2000. "Joint determination of process mean, production run size and material order quantity for a container-filling process," International Journal of Production Economics, Elsevier, vol. 63(3), pages 303-317, January.
    16. Angus Jeang & Yang-Kuei Lin, 2014. "Product and process parameters determination for quality and cost," International Journal of Systems Science, Taylor & Francis Journals, vol. 45(10), pages 2042-2054, October.
    17. Lee, Min Koo & Kwon, Hyuck Moo & Hong, Sung Hoon & Kim, Young Jin, 2007. "Determination of the optimum target value for a production process with multiple products," International Journal of Production Economics, Elsevier, vol. 107(1), pages 173-178, May.
    18. Selim, Shokri Z. & Al-Zu'bi, Walid K., 2011. "Optimal means for continuous processes in series," European Journal of Operational Research, Elsevier, vol. 210(3), pages 618-623, May.
    19. Chen, Shih-Pin, 2016. "Time value of delays in unreliable production systems with mixed uncertainties of fuzziness and randomness," European Journal of Operational Research, Elsevier, vol. 255(3), pages 834-844.
    20. F.J. Arcelus & M.A. Rahim, 1991. "Joint determination of optimum variable and attribute target means," Naval Research Logistics (NRL), John Wiley & Sons, vol. 38(6), pages 851-864, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:taf:japsta:v:37:y:2010:i:3:p:461-472. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Chris Longhurst (email available below). General contact details of provider: http://www.tandfonline.com/CJAS20 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.