IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i4p1412-d749901.html
   My bibliography  Save this article

A 2D Modelling Approach for Predicting the Response of a Two-Chamber Microbial Fuel Cell to Substrate Concentration and Electrolyte Conductivity Changes

Author

Listed:
  • Theofilos Kamperidis

    (School of Chemical Engineering, National Technical University of Athens, 15780 Athens, Greece)

  • Asimina Tremouli

    (School of Chemical Engineering, National Technical University of Athens, 15780 Athens, Greece)

  • Antonis Peppas

    (School of Chemical Engineering, National Technical University of Athens, 15780 Athens, Greece)

  • Gerasimos Lyberatos

    (School of Chemical Engineering, National Technical University of Athens, 15780 Athens, Greece
    Institute of Chemical Engineering Sciences (ICE-HT), Stadiou Str., Platani, 26504 Patras, Greece)

Abstract

Bioelectrochemical systems have been the focus of extensive research due to their unique advantages of converting the chemical energy stored in waste to electricity. To acquire a better understanding and optimize these systems, modelling has been employed. A 2D microbial fuel cell (MFC) model was developed using the finite element software Comsol Multiphysics ® (version 5.2), simulating a two-chamber MFC operating in batch mode. By solving mass and charge balance equations along with Monod–Butler–Volmer kinetics, the operation of the MFC was simulated. The model accurately describes voltage output and substrate consumption in the MFC. The computational results were compared with experimental data, thus validating the model. The voltage output and substrate consumption originating from the model were in agreement with the experimental data for two different cases (100 Ω, 1000 Ω external resistances). A polarization curve was extracted from the model by shifting the external resistance gradually, calculating a similar maximum power (47 mW/m 2 ) to the observed experimental one (49 mW/m 2 ). The validated model was used to predict the MFC response to varying initial substrate concentrations (0.125–4 g COD/L) and electrolyte conductivity (0.04–100 S/m) in order to determine the optimum operating conditions.

Suggested Citation

  • Theofilos Kamperidis & Asimina Tremouli & Antonis Peppas & Gerasimos Lyberatos, 2022. "A 2D Modelling Approach for Predicting the Response of a Two-Chamber Microbial Fuel Cell to Substrate Concentration and Electrolyte Conductivity Changes," Energies, MDPI, vol. 15(4), pages 1-15, February.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:4:p:1412-:d:749901
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/4/1412/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/4/1412/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Serra, P.M.D. & Espírito-Santo, A. & Magrinho, M., 2020. "A steady-state electrical model of a microbial fuel cell through multiple-cycle polarization curves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 117(C).
    2. Oliveira, V.B. & Simões, M. & Melo, L.F. & Pinto, A.M.F.R., 2013. "A 1D mathematical model for a microbial fuel cell," Energy, Elsevier, vol. 61(C), pages 463-471.
    3. Al-Baghdadi, Maher A.R. Sadiq, 2005. "Modelling of proton exchange membrane fuel cell performance based on semi-empirical equations," Renewable Energy, Elsevier, vol. 30(10), pages 1587-1599.
    4. Bajracharya, Suman & Sharma, Mohita & Mohanakrishna, Gunda & Dominguez Benneton, Xochitl & Strik, David P.B.T.B. & Sarma, Priyangshu M. & Pant, Deepak, 2016. "An overview on emerging bioelectrochemical systems (BESs): Technology for sustainable electricity, waste remediation, resource recovery, chemical production and beyond," Renewable Energy, Elsevier, vol. 98(C), pages 153-170.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fang, Shuo & Zhang, Yufeng & Ma, Zezhong & Sang, Shengtian & Liu, Xiaowei, 2016. "Systemic modeling and analysis of DMFC stack for behavior prediction in system-level application," Energy, Elsevier, vol. 112(C), pages 1015-1023.
    2. Anusha Ganta & Yasser Bashir & Sovik Das, 2022. "Dairy Wastewater as a Potential Feedstock for Valuable Production with Concurrent Wastewater Treatment through Microbial Electrochemical Technologies," Energies, MDPI, vol. 15(23), pages 1-34, November.
    3. Sona Kazemi & Melissa Barazandegan & Madjid Mohseni & Khalid Fatih, 2016. "Systematic Study of Separators in Air-Breathing Flat-Plate Microbial Fuel Cells—Part 2: Numerical Modeling," Energies, MDPI, vol. 9(2), pages 1-16, January.
    4. Kabutey, Felix Tetteh & Zhao, Qingliang & Wei, Liangliang & Ding, Jing & Antwi, Philip & Quashie, Frank Koblah & Wang, Weiye, 2019. "An overview of plant microbial fuel cells (PMFCs): Configurations and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 402-414.
    5. Hidalgo, Diana & Tommasi, Tonia & Cauda, Valentina & Porro, Samuele & Chiodoni, Angelica & Bejtka, Katarzyna & Ruggeri, Bernardo, 2014. "Streamlining of commercial Berl saddles: A new material to improve the performance of microbial fuel cells," Energy, Elsevier, vol. 71(C), pages 615-623.
    6. Ortiz-Martínez, V.M. & Salar-García, M.J. & Touati, K. & Hernández-Fernández, F.J. & de los Ríos, A.P. & Belhoucine, F. & Berrabbah, A. Alioua, 2016. "Assessment of spinel-type mixed valence Cu/Co and Ni/Co-based oxides for power production in single-chamber microbial fuel cells," Energy, Elsevier, vol. 113(C), pages 1241-1249.
    7. Tafaoli-Masoule, M. & Bahrami, A. & Elsayed, E.M., 2014. "Optimum design parameters and operating condition for maximum power of a direct methanol fuel cell using analytical model and genetic algorithm," Energy, Elsevier, vol. 70(C), pages 643-652.
    8. Hegazy Rezk & Ahmed Fathy, 2020. "Performance Improvement of PEM Fuel Cell Using Variable Step-Size Incremental Resistance MPPT Technique," Sustainability, MDPI, vol. 12(14), pages 1-16, July.
    9. Moreira, Marcos V. & da Silva, Gisele E., 2009. "A practical model for evaluating the performance of proton exchange membrane fuel cells," Renewable Energy, Elsevier, vol. 34(7), pages 1734-1741.
    10. Ismail, Zainab Z. & Habeeb, Ali A., 2017. "Experimental and modeling study of simultaneous power generation and pharmaceutical wastewater treatment in microbial fuel cell based on mobilized biofilm bearers," Renewable Energy, Elsevier, vol. 101(C), pages 1256-1265.
    11. Zuo, Jian & Lv, Hong & Zhou, Daming & Xue, Qiong & Jin, Liming & Zhou, Wei & Yang, Daijun & Zhang, Cunman, 2021. "Deep learning based prognostic framework towards proton exchange membrane fuel cell for automotive application," Applied Energy, Elsevier, vol. 281(C).
    12. Rezk, Hegazy & Aly, Mokhtar & Fathy, Ahmed, 2021. "A novel strategy based on recent equilibrium optimizer to enhance the performance of PEM fuel cell system through optimized fuzzy logic MPPT," Energy, Elsevier, vol. 234(C).
    13. Arpita Nandy & Mohita Sharma & Senthil Velan Venkatesan & Nicole Taylor & Lisa Gieg & Venkataraman Thangadurai, 2019. "Comparative Evaluation of Coated and Non-Coated Carbon Electrodes in a Microbial Fuel Cell for Treatment of Municipal Sludge," Energies, MDPI, vol. 12(6), pages 1-14, March.
    14. Van Limbergen, T. & Bonné, R. & Hustings, J. & Valcke, R. & Thijs, S. & Vangronsveld, J. & Manca, J.V., 2022. "Plant microbial fuel cells from the perspective of photovoltaics: Efficiency, power, and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 169(C).
    15. Jiseon You & Lauren Wallis & Nevena Radisavljevic & Grzegorz Pasternak & Vincenzo M. Sglavo & Martin M Hanczyc & John Greenman & Ioannis Ieropoulos, 2019. "A Comprehensive Study of Custom-Made Ceramic Separators for Microbial Fuel Cells: Towards “Living” Bricks," Energies, MDPI, vol. 12(21), pages 1-13, October.
    16. Valverde-Isorna, L. & Ali, D. & Hogg, D. & Abdel-Wahab, M., 2016. "Modelling the performance of wind–hydrogen energy systems: Case study the Hydrogen Office in Scotland/UK," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1313-1332.
    17. Wu, Shiqiang & Patil, Sunil A. & Chen, Shuiliang, 2018. "Auto-feeding microbial fuel cell inspired by transpiration of plants," Applied Energy, Elsevier, vol. 225(C), pages 934-939.
    18. Simeng Li & Gang Chen & Aavudai Anandhi, 2018. "Applications of Emerging Bioelectrochemical Technologies in Agricultural Systems: A Current Review," Energies, MDPI, vol. 11(11), pages 1-21, October.
    19. En-Jui Liu & Yi-Hsuan Hung & Che-Wun Hong, 2021. "Improved Metaheuristic Optimization Algorithm Applied to Hydrogen Fuel Cell and Photovoltaic Cell Parameter Extraction," Energies, MDPI, vol. 14(3), pages 1-16, January.
    20. Ma, Lei & Zhou, Lei & Ruan, Meng-Ya & Gu, Ji-Dong & Mu, Bo-Zhong, 2019. "Simultaneous methanogenesis and acetogenesis from the greenhouse carbon dioxide by an enrichment culture supplemented with zero-valent iron," Renewable Energy, Elsevier, vol. 132(C), pages 861-870.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:4:p:1412-:d:749901. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.