IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i3p695-d489758.html
   My bibliography  Save this article

Model-Based Evaluation of Air-Side Fouling in Closed-Circuit Cooling Towers

Author

Listed:
  • Björn Nienborg

    (Fraunhofer ISE—Institute for Solar Energy Systems, Division Thermal Systems and Buildings, Heidenhofstr. 2, 79110 Freiburg, Germany)

  • Marc Mathieu

    (Dr. O. Hartmann GmbH & Co. KG, Uhlandstrasse 30, 71665 Vaihingen an der Enz, Germany)

  • Alexander Schwärzler

    (Dr. O. Hartmann GmbH & Co. KG, Uhlandstrasse 30, 71665 Vaihingen an der Enz, Germany)

  • Katharina Conzelmann

    (Dr. O. Hartmann GmbH & Co. KG, Uhlandstrasse 30, 71665 Vaihingen an der Enz, Germany)

  • Lena Schnabel

    (Fraunhofer ISE—Institute for Solar Energy Systems, Division Thermal Systems and Buildings, Heidenhofstr. 2, 79110 Freiburg, Germany)

Abstract

Fouling is a permanent problem in process technology and is estimated to cost 0.25% of the gross national product. Evaporative cooling systems are especially susceptible to air-side fouling: as they work with untreated outside air, they are exposed to both natural (e.g., pollen) and human-made (e.g., industrial dust) contaminants. In addition, suspended solid particles and dissolved salts in the spray water are an issue. In this study we analyzed an approach for fouling detection based on a semi-physical (grey-box) cooling tower model which we calibrated with measurement data. A test series with reliable laboratory data indicates good applicability of the model. In three datasets, the performance decreases due to fouling (scaling, which was provoked intentionally) in the range of 5–11% were clearly detected. When applied to measurement data of two cooling towers in real applications, the model also proved to be well calibratable with relatively little data (two to four operating days). For two data sets, the model yielded reasonable results when applied to long term data: a cooling tower cleaning could be retraced and nominal operation was verified during the remaining time. During the analysis of a third data set a temporary performance deviation was found, which could not be explained with the recorded data. Thus, the approach turned out to be generally applicable but requires further verification and refinement in order to increase the robustness. If successful, it can be transferred to a commercial product for need-oriented maintenance in order to reduce cooling tower operating costs and environmental impact.

Suggested Citation

  • Björn Nienborg & Marc Mathieu & Alexander Schwärzler & Katharina Conzelmann & Lena Schnabel, 2021. "Model-Based Evaluation of Air-Side Fouling in Closed-Circuit Cooling Towers," Energies, MDPI, vol. 14(3), pages 1-15, January.
  • Handle: RePEc:gam:jeners:v:14:y:2021:i:3:p:695-:d:489758
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/3/695/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/14/3/695/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Stabat, Pascal & Marchio, Dominique, 2004. "Simplified model for indirect-contact evaporative cooling-tower behaviour," Applied Energy, Elsevier, vol. 78(4), pages 433-451, August.
    2. Nienborg, Björn & Dalibard, Antoine & Schnabel, Lena & Eicker, Ursula, 2017. "Approaches for the optimized control of solar thermally driven cooling systems," Applied Energy, Elsevier, vol. 185(P1), pages 732-744.
    3. Hannes Fugmann & Björn Nienborg & Gregor Trommler & Antoine Dalibard & Lena Schnabel, 2015. "Performance Evaluation of Air-Based Heat Rejection Systems," Energies, MDPI, vol. 8(2), pages 1-28, January.
    4. Chen-Yu Chiang & Ru Yang & Kuan-Hsiung Yang, 2016. "The Development and Full-Scale Experimental Validation of an Optimal Water Treatment Solution in Improving Chiller Performances," Sustainability, MDPI, vol. 8(7), pages 1-21, June.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gibelhaus, Andrej & Tangkrachang, Thanaphum & Bau, Uwe & Seiler, Jan & Bardow, André, 2019. "Integrated design and control of full sorption chiller systems," Energy, Elsevier, vol. 185(C), pages 409-422.
    2. Xiaoqing Wei & Nianping Li & Jinqing Peng & Jianlin Cheng & Jinhua Hu & Meng Wang, 2017. "Modeling and Optimization of a CoolingTower-Assisted Heat Pump System," Energies, MDPI, vol. 10(5), pages 1-18, May.
    3. Peikun Zhang & Bingfa Guo & Li Wang, 2023. "An Experimental Study on the Heat and Mass Transfer Characteristics of an Evaporative Cooler," Energies, MDPI, vol. 16(21), pages 1-15, October.
    4. Lu, Yuanshen & Klimenko, Alexander & Russell, Hugh & Dai, Yuchen & Warner, John & Hooman, Kamel, 2018. "A conceptual study on air jet-induced swirling plume for performance improvement of natural draft cooling towers," Applied Energy, Elsevier, vol. 217(C), pages 496-508.
    5. D’Antoni, M. & Romeli, D. & Fedrizzi, R., 2016. "A model for the performance assessment of hybrid coolers by means of transient numerical simulation," Applied Energy, Elsevier, vol. 181(C), pages 477-494.
    6. Palomba, Valeria & Dino, Giuseppe E. & Frazzica, Andrea, 2020. "Coupling sorption and compression chillers in hybrid cascade layout for efficient exploitation of renewables: Sizing, design and optimization," Renewable Energy, Elsevier, vol. 154(C), pages 11-28.
    7. Yeudiel Garcíadealva & Roberto Best & Víctor Hugo Gómez & Alejandro Vargas & Wilfrido Rivera & José Camilo Jiménez-García, 2021. "A Cascade Proportional Integral Derivative Control for a Plate-Heat-Exchanger-Based Solar Absorption Cooling System," Energies, MDPI, vol. 14(13), pages 1-20, July.
    8. Valeria Palomba & Emiliano Borri & Antonios Charalampidis & Andrea Frazzica & Sotirios Karellas & Luisa F. Cabeza, 2021. "An Innovative Solar-Biomass Energy System to Increase the Share of Renewables in Office Buildings," Energies, MDPI, vol. 14(4), pages 1-25, February.
    9. Afroz, Zakia & Shafiullah, GM & Urmee, Tania & Higgins, Gary, 2018. "Modeling techniques used in building HVAC control systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 83(C), pages 64-84.
    10. Speerforck, Arne & Ling, Jiazhen & Aute, Vikrant & Radermacher, Reinhard & Schmitz, Gerhard, 2017. "Modeling and simulation of a desiccant assisted solar and geothermal air conditioning system," Energy, Elsevier, vol. 141(C), pages 2321-2336.
    11. Kyriakides, Alexios-Spyridon & Papadopoulos, Athanasios I. & Seferlis, Panos & Hassan, Ibrahim, 2020. "Dynamic modelling and control of single, double and triple effect absorption refrigeration cycles," Energy, Elsevier, vol. 210(C).
    12. Meyers, Steven & Schmitt, Bastian & Vajen, Klaus, 2018. "Renewable process heat from solar thermal and photovoltaics: The development and application of a universal methodology to determine the more economical technology," Applied Energy, Elsevier, vol. 212(C), pages 1537-1552.
    13. Cui, Haijiao & Li, Nianping & Peng, Jinqing & Cheng, Jianlin & Li, Shengbing, 2016. "Study on the dynamic and thermal performances of a reversibly used cooling tower with upward spraying," Energy, Elsevier, vol. 96(C), pages 268-277.
    14. Ma, Peizheng & Wang, Lin-Shu & Guo, Nianhua, 2014. "Modeling of hydronic radiant cooling of a thermally homeostatic building using a parametric cooling tower," Applied Energy, Elsevier, vol. 127(C), pages 172-181.
    15. Xiaoqing Wei & Nianping Li & Jinqing Peng & Jianlin Cheng & Jinhua Hu & Meng Wang, 2017. "Performance Analyses of Counter-Flow Closed Wet Cooling Towers Based on a Simplified Calculation Method," Energies, MDPI, vol. 10(3), pages 1-15, February.
    16. Moradi, Ramin & Cioccolanti, Luca & Del Zotto, Luca & Renzi, Massimiliano, 2023. "Comparative sensitivity analysis of micro-scale gas turbine and supercritical CO2 systems with bottoming organic Rankine cycles fed by the biomass gasification for decentralized trigeneration," Energy, Elsevier, vol. 266(C).
    17. Jawairia Imtiaz Ahmad & Sara Giorgi & Ljiljana Zlatanovic & Gang Liu & Jan Peter van der Hoek, 2021. "Maximizing Thermal Energy Recovery from Drinking Water for Cooling Purpose," Energies, MDPI, vol. 14(9), pages 1-14, April.
    18. Tarun Kumar Aseri & Chandan Sharma & Tara C. Kandpal, 2022. "Condenser cooling technologies for concentrating solar power plants: a review," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(4), pages 4511-4565, April.
    19. Shan, Nannan & Yin, Yonggao & Zhang, Xiaosong, 2018. "Study on performance of a novel energy-efficient heat pump system using liquid desiccant," Applied Energy, Elsevier, vol. 219(C), pages 325-337.
    20. Ming Gao & Chang Guo & Chaoqun Ma & Yuetao Shi & Fengzhong Sun, 2017. "Thermal Performance for Wet Cooling Tower with Different Layout Patterns of Fillings under Typical Crosswind Conditions," Energies, MDPI, vol. 10(1), pages 1-8, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:3:p:695-:d:489758. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.