IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i4p590-d205443.html
   My bibliography  Save this article

Influence on CO and PM Emissions of an Innovative Burner Pot for Pellet Stoves: An Experimental Study

Author

Listed:
  • Luigi F. Polonini

    (Dipartimento di Ingegneria Meccanica ed Industriale, Università degli Studi di Brescia, via Branze 38, 25123 Brescia, Italy)

  • Domenico Petrocelli

    (AICO S.p.A., Via Kupfer 31, Palazzolo sull’Oglio, 25036 Brescia, Italy)

  • Simone P. Parmigiani

    (AICO S.p.A., Via Kupfer 31, Palazzolo sull’Oglio, 25036 Brescia, Italy)

  • Adriano M. Lezzi

    (Dipartimento di Ingegneria Meccanica ed Industriale, Università degli Studi di Brescia, via Branze 38, 25123 Brescia, Italy)

Abstract

In this study, an extensive set of experiments has been performed to investigate how the emissions of carbon monoxide (CO) and particulate matter (PM) from wood pellet combustion are correlated with the different layout of air inlets in the two burner pots of pellet stoves. In particular, emissions generated using a “traditional” burner pot are compared with those produced with an innovative one. Tests were carried out on four pellet stoves (8–11 kW burning power). Tests show that CO emissions can be reduced close to zero using the innovative burner pot. PM emissions are also reduced, but not as much as those of CO. This phenomenon is explained assuming that CO reduction implies a reduction of the organic part of PM, but not of the inorganic matter. Experiments also show an apparent dependence of PM release on the time from ignition for both burner pot models: PM emissions increase and the color of PM deposited on filters varies over a wide range. It is argued that this effect is due to ash accumulation on the bottom of the burner pot and to its interaction with the primary air stream that flows over it.

Suggested Citation

  • Luigi F. Polonini & Domenico Petrocelli & Simone P. Parmigiani & Adriano M. Lezzi, 2019. "Influence on CO and PM Emissions of an Innovative Burner Pot for Pellet Stoves: An Experimental Study," Energies, MDPI, vol. 12(4), pages 1-13, February.
    • Handle: RePEc:gam:jeners:v:12:y:2019:i:4:p:590-:d:205443
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/4/590/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/12/4/590/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Toscano, G. & Duca, D. & Amato, A. & Pizzi, A., 2014. "Emission from realistic utilization of wood pellet stove," Energy, Elsevier, vol. 68(C), pages 644-650.
    2. Aaron Fuller & Jörg Maier & Emmanouil Karampinis & Jana Kalivodova & Panagiotis Grammelis & Emmanuel Kakaras & Günter Scheffknecht, 2018. "Fly Ash Formation and Characteristics from (co-)Combustion of an Herbaceous Biomass and a Greek Lignite (Low-Rank Coal) in a Pulverized Fuel Pilot-Scale Test Facility," Energies, MDPI, vol. 11(6), pages 1-38, June.
    3. Ehsan Houshfar & Terese Løvås & Øyvind Skreiberg, 2012. "Experimental Investigation on NO x Reduction by Primary Measures in Biomass Combustion: Straw, Peat, Sewage Sludge, Forest Residues and Wood Pellets," Energies, MDPI, vol. 5(2), pages 1-21, February.
    4. Kshirsagar, Milind P. & Kalamkar, Vilas R., 2015. "A mathematical tool for predicting thermal performance of natural draft biomass cookstoves and identification of a new operational parameter," Energy, Elsevier, vol. 93(P1), pages 188-201.
    5. Araceli Regueiro & David Patiño & Jacobo Porteiro & Enrique Granada & José Luis Míguez, 2016. "Effect of Air Staging Ratios on the Burning Rate and Emissions in an Underfeed Fixed-Bed Biomass Combustor," Energies, MDPI, vol. 9(11), pages 1-16, November.
    6. Esperanza Monedero & Henar Portero & Magín Lapuerta, 2018. "Combustion of Poplar and Pine Pellet Blends in a 50 kW Domestic Boiler: Emissions and Combustion Efficiency," Energies, MDPI, vol. 11(6), pages 1-17, June.
    7. Costa, M. & Massarotti, N. & Indrizzi, V. & Rajh, B. & Yin, C. & Samec, N., 2014. "Engineering bed models for solid fuel conversion process in grate-fired boilers," Energy, Elsevier, vol. 77(C), pages 244-253.
    8. Venturini, Elisa & Vassura, Ivano & Zanetti, Cristian & Pizzi, Andrea & Toscano, Giuseppe & Passarini, Fabrizio, 2015. "Evaluation of non-steady state condition contribution to the total emissions of residential wood pellet stove," Energy, Elsevier, vol. 88(C), pages 650-657.
    9. Patel, Sameer & Biswas, Pratim, 2018. "A simplified combustion model integrated with a particle growth dynamic model for top-lit updraft cookstoves," Energy, Elsevier, vol. 157(C), pages 658-668.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Andrzej Greinert & Maria Mrówczyńska & Radosław Grech & Wojciech Szefner, 2020. "The Use of Plant Biomass Pellets for Energy Production by Combustion in Dedicated Furnaces," Energies, MDPI, vol. 13(2), pages 1-17, January.
    2. Andrzej Greinert & Maria Mrówczyńska & Wojciech Szefner, 2019. "The Use of Waste Biomass from the Wood Industry and Municipal Sources for Energy Production," Sustainability, MDPI, vol. 11(11), pages 1-19, May.
    3. Lenka Štofová & Petra Szaryszová & Bohuslava Mihalčová, 2021. "Testing the Bioeconomic Options of Transitioning to Solid Recovered Fuel: A Case Study of a Thermal Power Plant in Slovakia," Energies, MDPI, vol. 14(6), pages 1-20, March.
    4. Vicente, E.D. & Vicente, A.M. & Evtyugina, M. & Tarelho, L.A.C. & Almeida, S.M. & Alves, C., 2020. "Emissions from residential combustion of certified and uncertified pellets," Renewable Energy, Elsevier, vol. 161(C), pages 1059-1071.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ozgen, S. & Cernuschi, S. & Caserini, S., 2021. "An overview of nitrogen oxides emissions from biomass combustion for domestic heat production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    2. Andrzej Greinert & Maria Mrówczyńska & Radosław Grech & Wojciech Szefner, 2020. "The Use of Plant Biomass Pellets for Energy Production by Combustion in Dedicated Furnaces," Energies, MDPI, vol. 13(2), pages 1-17, January.
    3. Andrzej Greinert & Maria Mrówczyńska & Wojciech Szefner, 2019. "The Use of Waste Biomass from the Wood Industry and Municipal Sources for Energy Production," Sustainability, MDPI, vol. 11(11), pages 1-19, May.
    4. Pizzi, A. & Foppa Pedretti, E. & Duca, D. & Rossini, G. & Mengarelli, C. & Ilari, A. & Mancini, M. & Toscano, G., 2018. "Emissions of heating appliances fuelled with agropellet produced from vine pruning residues and environmental aspects," Renewable Energy, Elsevier, vol. 121(C), pages 513-520.
    5. Kshirsagar, Milind P. & Kalamkar, Vilas R., 2016. "User-centric approach for the design and sizing of natural convection biomass cookstoves for lower emissions," Energy, Elsevier, vol. 115(P1), pages 1202-1215.
    6. Garbacz, Przemysław & Wejkowski, Robert, 2020. "Numerical research on the SNCR method in a grate boiler equipped with the innovative FJBS system," Energy, Elsevier, vol. 207(C).
    7. Rocío Collado & Esperanza Monedero & Víctor Manuel Casero-Alonso & Licesio J. Rodríguez-Aragón & Juan José Hernández, 2022. "Almond Shells and Exhausted Olive Cake as Fuels for Biomass Domestic Boilers: Optimization, Performance and Pollutant Emissions," Sustainability, MDPI, vol. 14(12), pages 1-17, June.
    8. Fabrizio, Enrico & Seguro, Federico & Filippi, Marco, 2014. "Integrated HVAC and DHW production systems for Zero Energy Buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 515-541.
    9. Vicente, E.D. & Vicente, A.M. & Evtyugina, M. & Tarelho, L.A.C. & Almeida, S.M. & Alves, C., 2020. "Emissions from residential combustion of certified and uncertified pellets," Renewable Energy, Elsevier, vol. 161(C), pages 1059-1071.
    10. Chen, Tao & Sjöblom, Jonas & Ström, Henrik, 2022. "Numerical investigations of soot generation during wood-log combustion," Applied Energy, Elsevier, vol. 325(C).
    11. Raquel Pérez-Orozco & David Patiño & Jacobo Porteiro & José Luís Míguez, 2020. "Novel Test Bench for the Active Reduction of Biomass Particulate Matter Emissions," Sustainability, MDPI, vol. 12(1), pages 1-13, January.
    12. Pérez-Orozco, Raquel & Patiño, David & Porteiro, Jacobo & Míguez, José Luis, 2020. "Bed cooling effects in solid particulate matter emissions during biomass combustion. A morphological insight," Energy, Elsevier, vol. 205(C).
    13. Gillespie, Gary D. & Everard, Colm D. & McDonnell, Kevin P., 2015. "Prediction of biomass pellet quality indices using near infrared spectroscopy," Energy, Elsevier, vol. 80(C), pages 582-588.
    14. Tanui, J.K. & Kioni, P.N. & Mirre, T. & Nowitzki, M. & Karuri, N.W., 2020. "The influence of particle packing density on wood combustion in a fixed bed under oxy-fuel conditions," Energy, Elsevier, vol. 194(C).
    15. Daniela D. Porcino & Francesco Mauriello & Lucio Bonaccorsi & Giuseppe Tomasello & Emilia Paone & Angela Malara, 2020. "Recovery of Biomass Fly Ash and HDPE in Innovative Synthetic Lightweight Aggregates for Sustainable Geotechnical Applications," Sustainability, MDPI, vol. 12(16), pages 1-16, August.
    16. Izydorczyk, Grzegorz & Skrzypczak, Dawid & Kocek, Daria & Mironiuk, Małgorzata & Witek-Krowiak, Anna & Moustakas, Konstantinos & Chojnacka, Katarzyna, 2020. "Valorization of bio-based post-extraction residues of goldenrod and alfalfa as energy pellets," Energy, Elsevier, vol. 194(C).
    17. Díaz-Ramírez, Maryori & Sebastián, Fernando & Royo, Javier & Rezeau, Adeline, 2014. "Influencing factors on NOX emission level during grate conversion of three pelletized energy crops," Applied Energy, Elsevier, vol. 115(C), pages 360-373.
    18. Patience Afi Seglah & Yajing Wang & Hongyan Wang & Yuyun Bi, 2019. "Estimation and Efficient Utilization of Straw Resources in Ghana," Sustainability, MDPI, vol. 11(15), pages 1-25, August.
    19. Stolarski, Mariusz J. & Stachowicz, Paweł & Dudziec, Paweł, 2022. "Wood pellet quality depending on dendromass species," Renewable Energy, Elsevier, vol. 199(C), pages 498-508.
    20. Tianyou Chen & Honglei Jia & Shengwei Zhang & Xumin Sun & Yuqiu Song & Hongfang Yuan, 2020. "Optimization of Cold Pressing Process Parameters of Chopped Corn Straws for Fuel," Energies, MDPI, vol. 13(3), pages 1-21, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:4:p:590-:d:205443. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.