IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v184y2023ics1364032123003970.html
   My bibliography  Save this article

Materials, performances and applications of electric heating films

Author

Listed:
  • Zhu, Zhu
  • Lu, Hao
  • Zhao, Wenjun
  • tuerxunjiang, Ailidaer
  • Chang, Xiqiang

Abstract

With the intensification of global climate problems, the worldwide call for reducing CO2 emissions is getting louder and louder. Low-carbon development has become the consensus of all countries. The electric heating film systems (EHFS) have recently attracted much attention as a clean and low-carbon building heating way due to the global target of carbon neutrality. This paper aims to provide a comprehensive review of the materials, performances and applications of the electric heating film (EHF). The conductive materials for the EHF mainly include graphene and carbon nanotubes (CNTs). Moreover, the main preparation methods are redox method, chemical vapor deposition (CVD), vacuum filtration method and screen printing. It was found that the EHF doped with the graphene or the carbon nanotubes (CNTs) has better performance on flexibility and thermal stability. The EHF prepared by chemical vapor deposition (CVD) has the best performance on uniformity and structure. However, this method is costly and difficult to implement for large-scale industrial production. Therefore, the screen printing technology remains the most widely used method. The composite EHF with two or more conductive materials (graphene and multi-walled carbon nanotubes (MWCNT)) has excellent mechanical properties, superb damage resistance and flexibility. In addition, the numerical simulation based on computational fluid dynamics (CFD) will be an important research method to investigate the indoor thermal environment of building heating by EHFS, which needs to be conducted in the future. The high performance EHF will be widely used in international applications such as artificial intelligence, wearable devices, aerospace, solar energy and medical protection.

Suggested Citation

  • Zhu, Zhu & Lu, Hao & Zhao, Wenjun & tuerxunjiang, Ailidaer & Chang, Xiqiang, 2023. "Materials, performances and applications of electric heating films," Renewable and Sustainable Energy Reviews, Elsevier, vol. 184(C).
    • Handle: RePEc:eee:rensus:v:184:y:2023:i:c:s1364032123003970
    DOI: 10.1016/j.rser.2023.113540
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032123003970
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2023.113540?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ahmad, Jakaria & Bazaka, Kateryna & Anderson, Liam J. & White, Ronald D. & Jacob, Mohan V., 2013. "Materials and methods for encapsulation of OPV: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 27(C), pages 104-117.
    2. Kiurski, Jelena S. & Marić, Branislav B. & Aksentijević, Snežana M. & Oros, Ivana B. & Kecić, Vesna S. & Kovacˇević, Ilija M., 2013. "Indoor air quality investigation from screen printing industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 224-231.
    3. Keun Soo Kim & Yue Zhao & Houk Jang & Sang Yoon Lee & Jong Min Kim & Kwang S. Kim & Jong-Hyun Ahn & Philip Kim & Jae-Young Choi & Byung Hee Hong, 2009. "Large-scale pattern growth of graphene films for stretchable transparent electrodes," Nature, Nature, vol. 457(7230), pages 706-710, February.
    4. Olabi, A.G. & Abdelkareem, Mohammad Ali & Wilberforce, Tabbi & Sayed, Enas Taha, 2021. "Application of graphene in energy storage device – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    5. Rosli, Nurul Nazli & Ibrahim, Mohd Adib & Ahmad Ludin, Norasikin & Mat Teridi, Mohd Asri & Sopian, Kamaruzzaman, 2019. "A review of graphene based transparent conducting films for use in solar photovoltaic applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 99(C), pages 83-99.
    6. Zhang, Zongxi & Zhou, Yuguang & Zhao, Nan & Li, Huan & Tohniyaz, Bahargul & Mperejekumana, Philbert & Hong, Quan & Wu, Rucong & Li, Gang & Sultan, Muhammad & Zayan, Ali Mohammed Ibrahim & Cao, Jinxin , 2021. "Clean heating during winter season in Northern China: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    7. Faizal, Mohammed & Bouazza, Abdelmalek & Singh, Rao M., 2016. "Heat transfer enhancement of geothermal energy piles," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 16-33.
    8. Ma, Peng-Cheng & Zhang, Yi, 2014. "Perspectives of carbon nanotubes/polymer nanocomposites for wind blade materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 651-660.
    9. Abdollahifar, M. & Molaiyan, P. & Lassi, U. & Wu, N.L. & Kwade, A., 2022. "Multifunctional behaviour of graphite in lithium–sulfur batteries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 169(C).
    10. Wei Jiang & Ke Song & Bailin Zheng & Yongchuan Xu & Ruoshi Fang, 2020. "Study on Fast Cold Start-Up Method of Proton Exchange Membrane Fuel Cell Based on Electric Heating Technology," Energies, MDPI, vol. 13(17), pages 1-26, August.
    11. ElMekawy, Ahmed & Hegab, Hanaa M. & Losic, Dusan & Saint, Christopher P. & Pant, Deepak, 2017. "Applications of graphene in microbial fuel cells: The gap between promise and reality," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 1389-1403.
    12. Khaled Obaideen & Abdul Ghani Olabi & Yaser Al Swailmeen & Nabila Shehata & Mohammad Ali Abdelkareem & Abdul Hai Alami & Cristina Rodriguez & Enas Taha Sayed, 2023. "Solar Energy: Applications, Trends Analysis, Bibliometric Analysis and Research Contribution to Sustainable Development Goals (SDGs)," Sustainability, MDPI, vol. 15(2), pages 1-34, January.
    13. Yadav, Anil Singh & Bhagoria, J.L., 2013. "Heat transfer and fluid flow analysis of solar air heater: A review of CFD approach," Renewable and Sustainable Energy Reviews, Elsevier, vol. 23(C), pages 60-79.
    14. Kaili Jiang & Qunqing Li & Shoushan Fan, 2002. "Spinning continuous carbon nanotube yarns," Nature, Nature, vol. 419(6909), pages 801-801, October.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sayed, Enas Taha & Abdelkareem, Mohammad Ali & Alawadhi, Hussain & Elsaid, Khaled & Wilberforce, Tabbi & Olabi, A.G., 2021. "Graphitic carbon nitride/carbon brush composite as a novel anode for yeast-based microbial fuel cells," Energy, Elsevier, vol. 221(C).
    2. Olabi, A.G. & Abdelkareem, Mohammad Ali & Wilberforce, Tabbi & Sayed, Enas Taha, 2021. "Application of graphene in energy storage device – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    3. Tomasz Sliwa & Aneta Sapińska-Śliwa & Andrzej Gonet & Tomasz Kowalski & Anna Sojczyńska, 2021. "Geothermal Boreholes in Poland—Overview of the Current State of Knowledge," Energies, MDPI, vol. 14(11), pages 1-21, June.
    4. Ma, Qijie & Wang, Peijun, 2020. "Underground solar energy storage via energy piles," Applied Energy, Elsevier, vol. 261(C).
    5. Jin, Dongxu & Zhang, Manman & Wang, Ping & Xu, Shasha, 2015. "Numerical investigation of heat transfer and fluid flow in a solar air heater duct with multi V-shaped ribs on the absorber plate," Energy, Elsevier, vol. 89(C), pages 178-190.
    6. Zhou, Liqun & Wang, Yiping & Huang, Qunwu, 2019. "Parametric analysis on the performance of flat plate collector with transparent insulation material," Energy, Elsevier, vol. 174(C), pages 534-542.
    7. EL-Mesery, Hany S. & EL-Seesy, Ahmed I. & Hu, Zicheng & Li, Yang, 2022. "Recent developments in solar drying technology of food and agricultural products: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    8. Hegazy Rezk & Mokhtar Aly & Rania M. Ghoniem, 2023. "Robust Fuzzy Logic MPPT Using Gradient-Based Optimization for PEMFC Power System," Sustainability, MDPI, vol. 15(18), pages 1-18, September.
    9. Nidhul, Kottayat & Kumar, Sachin & Yadav, Ajay Kumar & Anish, S., 2020. "Enhanced thermo-hydraulic performance in a V-ribbed triangular duct solar air heater: CFD and exergy analysis," Energy, Elsevier, vol. 200(C).
    10. Qader, Bootan S. & Supeni, E.E. & Ariffin, M.K.A. & Talib, A.R. Abu, 2019. "Numerical investigation of flow through inclined fins under the absorber plate of solar air heater," Renewable Energy, Elsevier, vol. 141(C), pages 468-481.
    11. Ma, Ting & Guo, Zhixiong & Lin, Mei & Wang, Qiuwang, 2021. "Recent trends on nanofluid heat transfer machine learning research applied to renewable energy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    12. Kumar, Rajneesh & Goel, Varun & Kumar, Anoop, 2018. "Investigation of heat transfer augmentation and friction factor in triangular duct solar air heater due to forward facing chamfered rectangular ribs: A CFD based analysis," Renewable Energy, Elsevier, vol. 115(C), pages 824-835.
    13. Alberdi-Pagola, Maria & Poulsen, Søren Erbs & Jensen, Rasmus Lund & Madsen, Søren, 2020. "A case study of the sizing and optimisation of an energy pile foundation (Rosborg, Denmark)," Renewable Energy, Elsevier, vol. 147(P2), pages 2724-2735.
    14. Arabhosseini, Akbar & Samimi-Akhijahani, Hadi & Motahayyer, Mehrnosh, 2019. "Increasing the energy and exergy efficiencies of a collector using porous and recycling system," Renewable Energy, Elsevier, vol. 132(C), pages 308-325.
    15. Yang, Xiaohan & Uddin, Ashraf, 2014. "Effect of thermal annealing on P3HT:PCBM bulk-heterojunction organic solar cells: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 324-336.
    16. Anil Kumar & Man-Hoe Kim, 2016. "CFD Analysis on the Thermal Hydraulic Performance of an SAH Duct with Multi V-Shape Roughened Ribs," Energies, MDPI, vol. 9(6), pages 1-23, May.
    17. Herrando, María & Ramos, Alba & Zabalza, Ignacio & Markides, Christos N., 2019. "A comprehensive assessment of alternative absorber-exchanger designs for hybrid PVT-water collectors," Applied Energy, Elsevier, vol. 235(C), pages 1583-1602.
    18. Abdul Ghani Olabi & Tabbi Wilberforce & Mohammad Ali Abdelkareem & Mohamad Ramadan, 2021. "Critical Review of Flywheel Energy Storage System," Energies, MDPI, vol. 14(8), pages 1-33, April.
    19. Andrea Ferrantelli & Jevgeni Fadejev & Jarek Kurnitski, 2019. "Energy Pile Field Simulation in Large Buildings: Validation of Surface Boundary Assumptions," Energies, MDPI, vol. 12(5), pages 1-20, February.
    20. Ji, Qiang & Han, Zongwei & Li, Xiuming & Yang, Lingyan, 2022. "Energy and economic evaluation of the air source hybrid heating system driven by off-peak electric thermal storage in cold regions," Renewable Energy, Elsevier, vol. 182(C), pages 69-85.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:184:y:2023:i:c:s1364032123003970. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.