IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v80y2015icp489-497.html
   My bibliography  Save this article

Numerical simulation of the effect of relative thickness on aerodynamic performance improvement of asymmetrical blunt trailing-edge modification

Author

Listed:
  • Zhang, Xu
  • Li, Wei
  • Liu, Hailong

Abstract

In this paper, the aerodynamic performance of wind turbine airfoils with different relative thicknesses and their modifications has been numerically investigated to facilitate a greater understanding of the effects of maximum relative thickness and its position on the aerodynamic performance improvement of asymmetrical blunt trailing-edge modification. The lift and drag coefficients of airfoil NACA4415 are calculated with the k-ω SST turbulence model, and are compared with experimental data to validate the simulation accuracy of the Computational Fluid Dynamics (CFD) approach. The airfoils with different relative thicknesses are modified to be asymmetrical blunt trailing-edge airfoils by means of the software Xfoil. The best trailing-edge thickness distribution ratio is obtained by comparing the aerodynamic performance of the modifications with different distribution ratios. The aerodynamic performance of original airfoils and their asymmetrical modifications with the best thickness distribution ratio being 1:3 is investigated to analyze the increments of lift and drag coefficients and lift-drag ratio. Results indicate that with the increasing of relative thickness, the lift coefficient increment of NACA4418 airfoil is the smallest for the angle of attack more than 9°, and the drag coefficient increment as a whole decreases first and then increases, but the average lift-drag ratio increment of NACA4412 airfoil is the largest, closely followed by NACA4415 airfoil. It is also showed that with the relative thickness position close to the leading-edge, the increments of lift and drag coefficients decrease and increase for the angle of attack more than a certain value, respectively, and the average lift-drag ratio increment of NACA4415 airfoil is positive and larger than those of NACA4415-mod25 and NACA4415-mod20 airfoils. Therefore, the medium thickness airfoil whose relative thickness position is away from the leading-edge is more suited to the asymmetrical blunt trailing-edge modification.

Suggested Citation

  • Zhang, Xu & Li, Wei & Liu, Hailong, 2015. "Numerical simulation of the effect of relative thickness on aerodynamic performance improvement of asymmetrical blunt trailing-edge modification," Renewable Energy, Elsevier, vol. 80(C), pages 489-497.
    • Handle: RePEc:eee:renene:v:80:y:2015:i:c:p:489-497
    DOI: 10.1016/j.renene.2015.02.038
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S096014811500138X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2015.02.038?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yang, Hua & Shen, Wenzhong & Xu, Haoran & Hong, Zedong & Liu, Chao, 2014. "Prediction of the wind turbine performance by using BEM with airfoil data extracted from CFD," Renewable Energy, Elsevier, vol. 70(C), pages 107-115.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jianhua Xu & Zhonghua Han & Xiaochao Yan & Wenping Song, 2019. "Design Optimization of a Multi-Megawatt Wind Turbine Blade with the NPU-MWA Airfoil Family," Energies, MDPI, vol. 12(17), pages 1-24, August.
    2. Hongpeng, Liu & Yu, Wang & Rujing, Yan & Peng, Xu & Qing, Wang, 2020. "Influence of the modification of asymmetric trailing-edge thickness on the aerodynamic performance of a wind turbine airfoil," Renewable Energy, Elsevier, vol. 147(P1), pages 1623-1631.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Francesco Mazzeo & Derek Micheletto & Alessandro Talamelli & Antonio Segalini, 2022. "An Experimental Study on a Wind Turbine Rotor Affected by Pitch Imbalance," Energies, MDPI, vol. 15(22), pages 1-16, November.
    2. Abutunis, Abdulaziz & Hussein, Rafid & Chandrashekhara, K., 2019. "A neural network approach to enhance blade element momentum theory performance for horizontal axis hydrokinetic turbine application," Renewable Energy, Elsevier, vol. 136(C), pages 1281-1293.
    3. Jan Michna & Krzysztof Rogowski & Galih Bangga & Martin O. L. Hansen, 2021. "Accuracy of the Gamma Re-Theta Transition Model for Simulating the DU-91-W2-250 Airfoil at High Reynolds Numbers," Energies, MDPI, vol. 14(24), pages 1-29, December.
    4. Dai, Juchuan & Li, Mimi & Chen, Huanguo & He, Tao & Zhang, Fan, 2022. "Progress and challenges on blade load research of large-scale wind turbines," Renewable Energy, Elsevier, vol. 196(C), pages 482-496.
    5. Amini, Shayesteh & Golzarian, Mahmood Reza & Mahmoodi, Esmail & Jeromin, Andres & Abbaspour-Fard, Mohammad Hossein, 2021. "Numerical simulation of the Mexico wind turbine using the actuator disk model along with the 3D correction of aerodynamic coefficients in OpenFOAM," Renewable Energy, Elsevier, vol. 163(C), pages 2029-2036.
    6. Hércules Araújo Oliveira & José Gomes de Matos & Luiz Antonio de Souza Ribeiro & Osvaldo Ronald Saavedra & Jerson Rogério Pinheiro Vaz, 2023. "Assessment of Correction Methods Applied to BEMT for Predicting Performance of Horizontal-Axis Wind Turbines," Sustainability, MDPI, vol. 15(8), pages 1-26, April.
    7. Kosasih, B. & Saleh Hudin, H., 2016. "Influence of inflow turbulence intensity on the performance of bare and diffuser-augmented micro wind turbine model," Renewable Energy, Elsevier, vol. 87(P1), pages 154-167.
    8. Shafiqur Rehman & Md. Mahbub Alam & Luai M. Alhems & M. Mujahid Rafique, 2018. "Horizontal Axis Wind Turbine Blade Design Methodologies for Efficiency Enhancement—A Review," Energies, MDPI, vol. 11(3), pages 1-34, February.
    9. Vučina, Damir & Marinić-Kragić, Ivo & Milas, Zoran, 2016. "Numerical models for robust shape optimization of wind turbine blades," Renewable Energy, Elsevier, vol. 87(P2), pages 849-862.
    10. Kyoungboo Yang, 2020. "Geometry Design Optimization of a Wind Turbine Blade Considering Effects on Aerodynamic Performance by Linearization," Energies, MDPI, vol. 13(9), pages 1-18, May.
    11. Hongpeng, Liu & Yu, Wang & Rujing, Yan & Peng, Xu & Qing, Wang, 2020. "Influence of the modification of asymmetric trailing-edge thickness on the aerodynamic performance of a wind turbine airfoil," Renewable Energy, Elsevier, vol. 147(P1), pages 1623-1631.
    12. Chen, Bei & Hua, Xugang & Zhang, Zili & Nielsen, Søren R.K. & Chen, Zhengqing, 2021. "Active flutter control of the wind turbines using double-pitched blades," Renewable Energy, Elsevier, vol. 163(C), pages 2081-2097.
    13. Erkan, Onur & Özkan, Musa & Karakoç, T. Hikmet & Garrett, Stephen J. & Thomas, Peter J., 2020. "Investigation of aerodynamic performance characteristics of a wind-turbine-blade profile using the finite-volume method," Renewable Energy, Elsevier, vol. 161(C), pages 1359-1367.
    14. Cai, Chang & Yang, Yingjian & Jia, Yan & Wu, Guangxing & Zhang, Hairui & Yuan, Feiqi & Qian, Quan & Li, Qing'an, 2023. "Aerodynamic load evaluation of leading edge and trailing edge windward states of large-scale wind turbine blade under parked condition," Applied Energy, Elsevier, vol. 350(C).
    15. Li, Qing’an & Xu, Jianzhong & Kamada, Yasunari & Takao, Maeda & Nishimura, Shogo & Wu, Guangxing & Cai, Chang, 2020. "Experimental investigations of airfoil surface flow of a horizontal axis wind turbine with LDV measurements," Energy, Elsevier, vol. 191(C).
    16. Srikanth Bashetty & Selahattin Ozcelik, 2021. "Review on Dynamics of Offshore Floating Wind Turbine Platforms," Energies, MDPI, vol. 14(19), pages 1-30, September.
    17. Bai, Chi-Jeng & Wang, Wei-Cheng, 2016. "Review of computational and experimental approaches to analysis of aerodynamic performance in horizontal-axis wind turbines (HAWTs)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 63(C), pages 506-519.
    18. Venkaiah, P. & Sarkar, Bikash K., 2020. "Hydraulically actuated horizontal axis wind turbine pitch control by model free adaptive controller," Renewable Energy, Elsevier, vol. 147(P1), pages 55-68.
    19. Siddiqui, M. Salman & Rasheed, Adil & Tabib, Mandar & Kvamsdal, Trond, 2019. "Numerical investigation of modeling frameworks and geometric approximations on NREL 5 MW wind turbine," Renewable Energy, Elsevier, vol. 132(C), pages 1058-1075.
    20. Chehouri, Adam & Younes, Rafic & Ilinca, Adrian & Perron, Jean, 2015. "Review of performance optimization techniques applied to wind turbines," Applied Energy, Elsevier, vol. 142(C), pages 361-388.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:80:y:2015:i:c:p:489-497. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.