IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v244y2022ics0925527321003236.html
   My bibliography  Save this article

Closed-loop supply chain potential of agricultural plastic waste: Economic and environmental assessment of bale wrap waste recycling in Finland

Author

Listed:
  • Mayanti, Bening
  • Helo, Petri

Abstract

It is estimated that 12000 tons of plastic waste is annually generated from the agricultural sector in Finland, and more than half of it comprises bale wrap films. Up to 70% of plastic film waste from the agricultural sector in Finland goes into landfills, and only around 10% is recycled. Recycling plastic material is desirable in order to close the loop in achieving a circular economy. This paper aims to assess the environmental and economic implications of bale wrap collection and recycling within the Finnish context. Two different collection scenarios, S1 (once a year collection) and S2 (twice a year collection), covering 179 farms, were assessed. The research applied vehicle routing problem and environmental life cycle costing to quantify the cost and environmental impact per ton of granulate recycled material produced. It took a consequential approach, where the system boundary was expanded, and product substitution was considered. Overall, S1 offers 27% more economic savings with 36% less global warming potential (GWP) than S2. The collection phase, which has not commonly been included in existing recycling studies, shows significance in both scenarios. Although it only contributed about 0.7-1.2% to GWP, collection accounted for 32-36% of the total economic cost. Critical parameters were primarily associated with the market substitution factor and material loss during the recycling process. This study demonstrates that recycling bale wrap can provide environmental and economic savings. Furthermore, it shows the importance of decision-makers in prioritizing goals to balance environmental and economic objectives.

Suggested Citation

  • Mayanti, Bening & Helo, Petri, 2022. "Closed-loop supply chain potential of agricultural plastic waste: Economic and environmental assessment of bale wrap waste recycling in Finland," International Journal of Production Economics, Elsevier, vol. 244(C).
  • Handle: RePEc:eee:proeco:v:244:y:2022:i:c:s0925527321003236
    DOI: 10.1016/j.ijpe.2021.108347
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527321003236
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.ijpe.2021.108347?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Nasir, Mohammed Haneef Abdul & Genovese, Andrea & Acquaye, Adolf A. & Koh, S.C.L. & Yamoah, Fred, 2017. "Comparing linear and circular supply chains: A case study from the construction industry," International Journal of Production Economics, Elsevier, vol. 183(PB), pages 443-457.
    2. Accorsi, Riccardo & Cascini, Alessandro & Cholette, Susan & Manzini, Riccardo & Mora, Cristina, 2014. "Economic and environmental assessment of reusable plastic containers: A food catering supply chain case study," International Journal of Production Economics, Elsevier, vol. 152(C), pages 88-101.
    3. Rajendran, Saravanan & Scelsi, Lino & Hodzic, Alma & Soutis, Constantinos & Al-Maadeed, Mariam A., 2012. "Environmental impact assessment of composites containing recycled plastics," Resources, Conservation & Recycling, Elsevier, vol. 60(C), pages 131-139.
    4. Groot, Jim & Bing, Xiaoyun & Bos-Brouwers, Hilke & Bloemhof-Ruwaard, Jacqueline, 2014. "A comprehensive waste collection cost model applied to post-consumer plastic packaging waste," Resources, Conservation & Recycling, Elsevier, vol. 85(C), pages 79-87.
    5. Luijsterburg, Benny & Goossens, Han, 2014. "Assessment of plastic packaging waste: Material origin, methods, properties," Resources, Conservation & Recycling, Elsevier, vol. 85(C), pages 88-97.
    6. Das, Kanchan & Rao Posinasetti, Nageswara, 2015. "Addressing environmental concerns in closed loop supply chain design and planning," International Journal of Production Economics, Elsevier, vol. 163(C), pages 34-47.
    7. Lazarevic, David & Aoustin, Emmanuelle & Buclet, Nicolas & Brandt, Nils, 2010. "Plastic waste management in the context of a European recycling society: Comparing results and uncertainties in a life cycle perspective," Resources, Conservation & Recycling, Elsevier, vol. 55(2), pages 246-259.
    8. Genovese, Andrea & Acquaye, Adolf A. & Figueroa, Alejandro & Koh, S.C. Lenny, 2017. "Sustainable supply chain management and the transition towards a circular economy: Evidence and some applications," Omega, Elsevier, vol. 66(PB), pages 344-357.
    9. Rigamonti, L. & Grosso, M. & Møller, J. & Martinez Sanchez, V. & Magnani, S. & Christensen, T.H., 2014. "Environmental evaluation of plastic waste management scenarios," Resources, Conservation & Recycling, Elsevier, vol. 85(C), pages 42-53.
    10. Hicks, C. & Heidrich, O. & McGovern, T. & Donnelly, T., 2004. "A functional model of supply chains and waste," International Journal of Production Economics, Elsevier, vol. 89(2), pages 165-174, May.
    11. Cannella, Salvatore & Bruccoleri, Manfredi & Framinan, Jose M., 2016. "Closed-loop supply chains: What reverse logistics factors influence performance?," International Journal of Production Economics, Elsevier, vol. 175(C), pages 35-49.
    12. V. Daniel R. Guide & Luk N. Van Wassenhove, 2009. "OR FORUM---The Evolution of Closed-Loop Supply Chain Research," Operations Research, INFORMS, vol. 57(1), pages 10-18, February.
    13. David Lazarevic & Emmanuelle Aoustin & Nicolas Buclet & Nils Brandt, 2010. "Plastic Waste Management in the context of a European recycling society," Post-Print halshs-00584531, HAL.
    14. Jenkins, Robin R. & Martinez, Salvador A. & Palmer, Karen & Podolsky, Michael J., 2003. "The determinants of household recycling: a material-specific analysis of recycling program features and unit pricing," Journal of Environmental Economics and Management, Elsevier, vol. 45(2), pages 294-318, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jenny Gutierrez-Lopez & Ronald G. McGarvey & Christine Costello & Damon M. Hall, 2023. "Decision Support Frameworks in Solid Waste Management: A Systematic Review of Multi-Criteria Decision-Making with Sustainability and Social Indicators," Sustainability, MDPI, vol. 15(18), pages 1-31, September.
    2. Vlasopoulos, Antonis & Malinauskaite, Jurgita & Żabnieńska-Góra, Alina & Jouhara, Hussam, 2023. "Life cycle assessment of plastic waste and energy recovery," Energy, Elsevier, vol. 277(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Marta Mańkowska & Izabela Kotowska & Michał Pluciński, 2020. "Seaports as Nodal Points of Circular Supply Chains: Opportunities and Challenges for Secondary Ports," Sustainability, MDPI, vol. 12(9), pages 1-21, May.
    2. Zerbino, Pierluigi & Stefanini, Alessandro & Aloini, Davide & Dulmin, Riccardo & Mininno, Valeria, 2021. "Curling linearity into circularity: The benefits of formal scavenging in closed-loop settings," International Journal of Production Economics, Elsevier, vol. 240(C).
    3. Dominguez, Roberto & Cannella, Salvatore & Framinan, Jose M., 2021. "Remanufacturing configuration in complex supply chains," Omega, Elsevier, vol. 101(C).
    4. Väntsi, Olli & Kärki, Timo, 2015. "Environmental assessment of recycled mineral wool and polypropylene utilized in wood polymer composites," Resources, Conservation & Recycling, Elsevier, vol. 104(PA), pages 38-48.
    5. De Lima, Felipe Alexandre & Seuring, Stefan, 2023. "A Delphi study examining risk and uncertainty management in circular supply chains," International Journal of Production Economics, Elsevier, vol. 258(C).
    6. Manju Saroha & Dixit Garg & Sunil Luthra, 2022. "Analyzing the circular supply chain management performance measurement framework: the modified balanced scorecard technique," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 13(2), pages 951-960, June.
    7. Lausselet, Carine & Cherubini, Francesco & Oreggioni, Gabriel David & del Alamo Serrano, Gonzalo & Becidan, Michael & Hu, Xiangping & Rørstad, Per Kr. & Strømman, Anders Hammer, 2017. "Norwegian Waste-to-Energy: Climate change, circular economy and carbon capture and storage," Resources, Conservation & Recycling, Elsevier, vol. 126(C), pages 50-61.
    8. Ponte, Borja & Naim, Mohamed M. & Syntetos, Aris A., 2019. "The value of regulating returns for enhancing the dynamic behaviour of hybrid manufacturing-remanufacturing systems," European Journal of Operational Research, Elsevier, vol. 278(2), pages 629-645.
    9. Patricia van Loon & Luk N. Van Wassenhove & Ales Mihelic, 2022. "Designing a circular business strategy: 7 years of evolution at a large washing machine manufacturer," Business Strategy and the Environment, Wiley Blackwell, vol. 31(3), pages 1030-1041, March.
    10. Claudia Aparecida De Mattos & Thiago Lourenço Meira De Albuquerque, 2018. "Enabling Factors and Strategies for the Transition Toward a Circular Economy (CE)," Sustainability, MDPI, vol. 10(12), pages 1-18, December.
    11. Zhang, Abraham & Wang, Jason X. & Farooque, Muhammad & Wang, Yulan & Choi, Tsan-Ming, 2021. "Multi-dimensional circular supply chain management: A comparative review of the state-of-the-art practices and research," Transportation Research Part E: Logistics and Transportation Review, Elsevier, vol. 155(C).
    12. Rigamonti, L. & Grosso, M. & Møller, J. & Martinez Sanchez, V. & Magnani, S. & Christensen, T.H., 2014. "Environmental evaluation of plastic waste management scenarios," Resources, Conservation & Recycling, Elsevier, vol. 85(C), pages 42-53.
    13. Cannella, Salvatore & Bruccoleri, Manfredi & Framinan, Jose M., 2016. "Closed-loop supply chains: What reverse logistics factors influence performance?," International Journal of Production Economics, Elsevier, vol. 175(C), pages 35-49.
    14. Suzanne, Elodie & Absi, Nabil & Borodin, Valeria, 2020. "Towards circular economy in production planning: Challenges and opportunities," European Journal of Operational Research, Elsevier, vol. 287(1), pages 168-190.
    15. Das, Debabrata & Dutta, Pankaj, 2022. "Product return management through promotional offers: The role of consumers’ loss aversion," International Journal of Production Economics, Elsevier, vol. 251(C).
    16. Doussoulin, Jean Pierre & Bittencourt, Mariana, 2022. "How effective is the construction sector in promoting the circular economy in Brazil and France? : A waste input-output analysis," Structural Change and Economic Dynamics, Elsevier, vol. 60(C), pages 47-58.
    17. Tanksale, Ajinkya N. & Das, Debabrata & Verma, Priyanka & Tiwari, Manoj Kumar, 2021. "Unpacking the role of primary packaging material in designing green supply chains: An integrated approach," International Journal of Production Economics, Elsevier, vol. 236(C).
    18. Cricelli, Livio & Greco, Marco & Grimaldi, Michele, 2021. "An investigation on the effect of inter-organizational collaboration on reverse logistics," International Journal of Production Economics, Elsevier, vol. 240(C).
    19. Li Bai & F. Javier Sendra Garcia & Arunodaya Raj Mishra, 2022. "RETRACTED ARTICLE: Adoption of the sustainable circular supply chain under disruptions risk in manufacturing industry using an integrated fuzzy decision-making approach," Operations Management Research, Springer, vol. 15(3), pages 743-759, December.
    20. Dominguez, Roberto & Cannella, Salvatore & Ponte, Borja & Framinan, Jose M., 2020. "On the dynamics of closed-loop supply chains under remanufacturing lead time variability," Omega, Elsevier, vol. 97(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:244:y:2022:i:c:s0925527321003236. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.