IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i7p4150-4157.html
   My bibliography  Save this article

An experimental study of a cylindrical multi-hole premixed burner for the development of a condensing gas boiler

Author

Listed:
  • Lee, Seungro
  • Kum, Sung-Min
  • Lee, Chang-Eon

Abstract

This study experimentally examined a cylindrical multi-hole premixed burner for its potential use for a condensing gas boiler, which produces less NOx emissions and performs better. In this study, the hole diameters and the arrangement of a multi-hole burner were investigated using a flat burner model. The combustion characteristics for the flame stability as well as the NOx and CO emissions were examined using a cylindrical burner. For an optimal operating condition, the equivalence ratio for the cylindrical burner was between 0.70 and 0.75. For this condition, the turn-down ratio was 3:1 or higher, which was suitable for appropriate control of the boiler operation. The NOx and CO emissions were less than 40 ppm and less than 30 ppm, respectively, for a 0% O2 basis. The LPG and LNG were able to be used in this type of burner because there was no phenomenal difference in the stable combustion region between them.

Suggested Citation

  • Lee, Seungro & Kum, Sung-Min & Lee, Chang-Eon, 2011. "An experimental study of a cylindrical multi-hole premixed burner for the development of a condensing gas boiler," Energy, Elsevier, vol. 36(7), pages 4150-4157.
    • Handle: RePEc:eee:energy:v:36:y:2011:i:7:p:4150-4157
    DOI: 10.1016/j.energy.2011.04.029
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544211002787
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2011.04.029?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kermes, Vít & Be˘lohradský, Petr & Oral, Jaroslav & Stehlík, Petr, 2008. "Testing of gas and liquid fuel burners for power and process industries," Energy, Elsevier, vol. 33(10), pages 1551-1561.
    2. Chen, Zhichao & Li, Zhengqi & Zhu, Qunyi & Jing, Jianping, 2011. "Gas/particle flow and combustion characteristics and NOx emissions of a new swirl coal burner," Energy, Elsevier, vol. 36(2), pages 709-723.
    3. Kirschen, Marcus & Risonarta, Victor & Pfeifer, Herbert, 2009. "Energy efficiency and the influence of gas burners to the energy related carbon dioxide emissions of electric arc furnaces in steel industry," Energy, Elsevier, vol. 34(9), pages 1065-1072.
    4. Weber, C & Gebhardt, B & Fahl, U, 2002. "Market transformation for energy efficient technologies — success factors and empirical evidence for gas condensing boilers," Energy, Elsevier, vol. 27(3), pages 287-315.
    5. Macor, A. & Pavanello, P., 2009. "Performance and emissions of biodiesel in a boiler for residential heating," Energy, Elsevier, vol. 34(12), pages 2025-2032.
    6. Namkhat, A. & Jugjai, S., 2010. "Primary air entrainment characteristics for a self-aspirating burner: Model and experiments," Energy, Elsevier, vol. 35(4), pages 1701-1708.
    7. Weiss, Martin & Dittmar, Lars & Junginger, Martin & Patel, Martin K. & Blok, Kornelis, 2009. "Market diffusion, technological learning, and cost-benefit dynamics of condensing gas boilers in the Netherlands," Energy Policy, Elsevier, vol. 37(8), pages 2962-2976, August.
    8. Schaffel-Mancini, Natalia & Mancini, Marco & Szlek, Andrzej & Weber, Roman, 2010. "Novel conceptual design of a supercritical pulverized coal boiler utilizing high temperature air combustion (HTAC) technology," Energy, Elsevier, vol. 35(7), pages 2752-2760.
    9. Bujak, Janusz, 2009. "Optimal control of energy losses in multi-boiler steam systems," Energy, Elsevier, vol. 34(9), pages 1260-1270.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yu, Byeonghun & Kum, Sung-Min & Lee, Chang-Eon & Lee, Seungro, 2012. "An experimental study of heat transfer and pollutant emission characteristics at varying distances between the burner and the heat exchanger in a compact combustion system," Energy, Elsevier, vol. 42(1), pages 350-357.
    2. Hinrichs, Jörn & Felsmann, Daniel & Schweitzer-De Bortoli, Stefan & Tomczak, Heinz-Jörg & Pitsch, Heinz, 2018. "Numerical and experimental investigation of pollutant formation and emissions in a full-scale cylindrical heating unit of a condensing gas boiler," Applied Energy, Elsevier, vol. 229(C), pages 977-989.
    3. Lamioni, Rachele & Bronzoni, Cristiana & Folli, Marco & Tognotti, Leonardo & Galletti, Chiara, 2022. "Feeding H2-admixtures to domestic condensing boilers: Numerical simulations of combustion and pollutant formation in multi-hole burners," Applied Energy, Elsevier, vol. 309(C).
    4. Ahmadi, Ziaulhaq & Zabetian Targhi, Mohammad, 2021. "Thermal performance investigation of a premixed surface flame burner used in the domestic heating boilers," Energy, Elsevier, vol. 236(C).
    5. Zhang, Qunli & Niu, Yu & Yang, Xiaohu & Sun, Donghan & Xiao, Xin & Shen, Qi & Wang, Gang, 2020. "Experimental study of flue gas condensing heat recovery synergized with low NOx emission system," Applied Energy, Elsevier, vol. 269(C).
    6. Soltanian, Hossein & Targhi, Mohammad Zabetian & Pasdarshahri, Hadi, 2019. "Chemiluminescence usage in finding optimum operating range of multi-hole burners," Energy, Elsevier, vol. 180(C), pages 398-404.
    7. Saberi Moghaddam, Mohammad Hossein & Saei Moghaddam, Mojtaba & Khorramdel, Mohammad, 2017. "Numerical study of geometric parameters effecting temperature and thermal efficiency in a premix multi-hole flat flame burner," Energy, Elsevier, vol. 125(C), pages 654-662.
    8. Yılmaz, Semih & Kumlutaş, Dilek & Yücekaya, Utku Alp & Cumbul, Ahmet Yakup, 2021. "Prediction of the equilibrium compositions in the combustion products of a domestic boiler," Energy, Elsevier, vol. 233(C).
    9. Rolandas Paulauskas & Indrek Jõgi & Nerijus Striūgas & Dainius Martuzevičius & Kalev Erme & Jüri Raud & Martynas Tichonovas, 2019. "Application of Non-Thermal Plasma for NOx Reduction in the Flue Gases," Energies, MDPI, vol. 12(20), pages 1-13, October.
    10. Kuntikana, Pramod & Prabhu, S.V., 2017. "Thermal investigations on methane-air premixed flame jets of multi-port burners," Energy, Elsevier, vol. 123(C), pages 218-228.
    11. Najarnikoo, Mahdi & Targhi, Mohammad Zabetian & Pasdarshahri, Hadi, 2019. "Experimental study on the flame stability and color characterization of cylindrical premixed perforated burner of condensing boiler by image processing method," Energy, Elsevier, vol. 189(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yu, Byeonghun & Kum, Sung-Min & Lee, Chang-Eon & Lee, Seungro, 2013. "Combustion characteristics and thermal efficiency for premixed porous-media types of burners," Energy, Elsevier, vol. 53(C), pages 343-350.
    2. Yu, Byeonghun & Kum, Sung-Min & Lee, Chang-Eon & Lee, Seungro, 2012. "An experimental study of heat transfer and pollutant emission characteristics at varying distances between the burner and the heat exchanger in a compact combustion system," Energy, Elsevier, vol. 42(1), pages 350-357.
    3. Lee, Seungro & Kum, Sung-Min & Lee, Chang-Eon, 2011. "Performances of a heat exchanger and pilot boiler for the development of a condensing gas boiler," Energy, Elsevier, vol. 36(7), pages 3945-3951.
    4. Saberi Moghaddam, Mohammad Hossein & Saei Moghaddam, Mojtaba & Khorramdel, Mohammad, 2017. "Numerical study of geometric parameters effecting temperature and thermal efficiency in a premix multi-hole flat flame burner," Energy, Elsevier, vol. 125(C), pages 654-662.
    5. Mi, Jianchun & Li, Pengfei & Zheng, Chuguang, 2011. "Impact of injection conditions on flame characteristics from a parallel multi-jet burner," Energy, Elsevier, vol. 36(11), pages 6583-6595.
    6. Paul Baginski & Christoph Weber, 2017. "A Consumer Decision-making Process? Unfolding Energy Efficiency Decisions of German Owner-occupiers," EWL Working Papers 1708, University of Duisburg-Essen, Chair for Management Science and Energy Economics, revised Aug 2017.
    7. Bazooyar, Bahamin & Hosseini, Seyyed Yaghoob & Moradi Ghoje Begloo, Solat & Shariati, Ahmad & Hashemabadi, Seyed Hassan & Shaahmadi, Fariborz, 2018. "Mixed modified Fe2O3-WO3 as new fuel borne catalyst (FBC) for biodiesel fuel," Energy, Elsevier, vol. 149(C), pages 438-453.
    8. Tu, Yaojie & Xu, Shunta & Xu, Mingchen & Liu, Hao & Yang, Wenming, 2020. "Numerical study of methane combustion under moderate or intense low-oxygen dilution regime at elevated pressure conditions up to 8 atm," Energy, Elsevier, vol. 197(C).
    9. Jie Yang & Shaowen Lu & Liangyong Wang, 2020. "Fused magnesia manufacturing process: a survey," Journal of Intelligent Manufacturing, Springer, vol. 31(2), pages 327-350, February.
    10. Yong Zeng & Yanpeng Cai & Guohe Huang & Jing Dai, 2011. "A Review on Optimization Modeling of Energy Systems Planning and GHG Emission Mitigation under Uncertainty," Energies, MDPI, vol. 4(10), pages 1-33, October.
    11. Sungur, Bilal & Basar, Cem & Kaleli, Alirıza, 2023. "Multi-objective optimisation of the emission parameters and efficiency of pellet stove at different supply airflow positions based on machine learning approach," Energy, Elsevier, vol. 278(PA).
    12. Chul-Ho Kim & Seung-Eon Lee & Kang-Soo Kim, 2018. "Analysis of Energy Saving Potential in High-Performance Building Technologies under Korean Climatic Conditions," Energies, MDPI, vol. 11(4), pages 1-34, April.
    13. Brouwer, Anne Sjoerd & Kuramochi, Takeshi & van den Broek, Machteld & Faaij, André, 2013. "Fulfilling the electricity demand of electric vehicles in the long term future: An evaluation of centralized and decentralized power supply systems," Applied Energy, Elsevier, vol. 107(C), pages 33-51.
    14. Nardin, Gioacchino & Meneghetti, Antonella & Dal Magro, Fabio & Benedetti, Nicole, 2014. "PCM-based energy recovery from electric arc furnaces," Applied Energy, Elsevier, vol. 136(C), pages 947-955.
    15. Yang, D.L. & Tang, G.H. & Fan, Y.H. & Li, X.L. & Wang, S.Q., 2020. "Arrangement and three-dimensional analysis of cooling wall in 1000 MW S–CO2 coal-fired boiler," Energy, Elsevier, vol. 197(C).
    16. Tan, Kok Tat & Lee, Keat Teong, 2011. "A review on supercritical fluids (SCF) technology in sustainable biodiesel production: Potential and challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(5), pages 2452-2456, June.
    17. Chen, Zhengjie & Ma, Wenhui & Wu, Jijun & Wei, Kuixian & Yang, Xi & Lv, Guoqiang & Xie, Keqiang & Yu, Jie, 2016. "Influence of carbothermic reduction on submerged arc furnace energy efficiency during silicon production," Energy, Elsevier, vol. 116(P1), pages 687-693.
    18. Szewczyk, Dariusz & Ślefarski, Rafał & Jankowski, Radosław, 2017. "Analysis of the combustion process of syngas fuels containing high hydrocarbons and nitrogen compounds in Zonal Volumetric Combustion technology," Energy, Elsevier, vol. 121(C), pages 716-725.
    19. Gómez, Antonio & Dopazo, César & Fueyo, Norberto, 2014. "The causes of the high energy intensity of the Kazakh economy: A characterization of its energy system," Energy, Elsevier, vol. 71(C), pages 556-568.
    20. Enagi, Ibrahim I. & Al-attab, K.A. & Zainal, Z.A., 2018. "Liquid biofuels utilization for gas turbines: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 43-55.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:7:p:4150-4157. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.