IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i5p3092-3100.html
   My bibliography  Save this article

Design and development of a SPMB (self-aspirating, porous medium burner) with a submerged flame

Author

Listed:
  • Yoksenakul, W.
  • Jugjai, S.

Abstract

This work reports design and development of a SPMB (self-aspirating porous medium burner) for replacing the self-aspirating, CB (conventional gaseous fuel, free flame burners), which are widely used in heating process of SMEs (small and medium scale enterprises) in Thailand but they have relatively low thermal efficiency of about 30 percent. Design of the SPMB relies on the same important characteristics of the CB, i.e. using the same mixing tube and the same fuel nozzle. The SPMB is formed by a packed bed of alumina spheres. The pressure drop across the packed bed, diameter of particles and a combustion chamber diameter are estimated by Ergun’s equation in combination with Pe (Peclet number). The SPMB yields a submerged flame with an intense thermal radiation emitted downstream. An output radiation efficiency as high as 23 percent can be achieved at relatively high turn-down ratio of 2.65 and firing rate ranging from 23 to 61 kW. The SPMB shows a more complete combustion with relatively low CO emission of less than 200 ppm and acceptably high NOx emission of less than 98 ppm as compared with the CB throughout the range of firing rate studied, suggesting the possibility of the SPMB in replacing the CB.

Suggested Citation

  • Yoksenakul, W. & Jugjai, S., 2011. "Design and development of a SPMB (self-aspirating, porous medium burner) with a submerged flame," Energy, Elsevier, vol. 36(5), pages 3092-3100.
    • Handle: RePEc:eee:energy:v:36:y:2011:i:5:p:3092-3100
    DOI: 10.1016/j.energy.2011.02.054
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544211001502
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2011.02.054?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Makmool, U. & Jugjai, S. & Tia, S. & Vallikul, P. & Fungtammasan, B., 2007. "Performance and analysis by particle image velocimetry (PIV) of cooker-top burners in Thailand," Energy, Elsevier, vol. 32(10), pages 1986-1995.
    2. Namkhat, A. & Jugjai, S., 2010. "Primary air entrainment characteristics for a self-aspirating burner: Model and experiments," Energy, Elsevier, vol. 35(4), pages 1701-1708.
    3. Tamir, Abraham & Elperin, Ida & Yotzer, Shlomo, 1989. "Performance characteristics of a gas burner with a swirling central flame," Energy, Elsevier, vol. 14(7), pages 373-382.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mujeebu, M. Abdul & Abdullah, M.Z. & Mohamad, A.A., 2011. "Development of energy efficient porous medium burners on surface and submerged combustion modes," Energy, Elsevier, vol. 36(8), pages 5132-5139.
    2. Deb, Sunita & Muthukumar, P., 2021. "Development and performance assessment of LPG operated cluster Porous Radiant Burner for commercial cooking and industrial applications," Energy, Elsevier, vol. 219(C).
    3. Yuan, Ye & Li, GuoXiu & Sun, ZuoYu & Li, HongMeng & Zhou, ZiHang, 2016. "Experimental study on the dynamical features of a partially premixed methane jet flame in coflow," Energy, Elsevier, vol. 111(C), pages 593-598.
    4. Pahlevaninezhad, Masoud & Davazdah Emami, Mohsen & Panjepour, Masoud, 2014. "The effects of kinetic parameters on combustion characteristics in a sintering bed," Energy, Elsevier, vol. 73(C), pages 160-176.
    5. Janvekar, Ayub Ahmed & Miskam, M.A. & Abas, Aizat & Ahmad, Zainal Arifin & Juntakan, T. & Abdullah, M.Z., 2017. "Effects of the preheat layer thickness on surface/submerged flame during porous media combustion of micro burner," Energy, Elsevier, vol. 122(C), pages 103-110.
    6. Wang, Hongmin & Wei, Chunzhi & Zhao, Pinghui & Ye, Taohong, 2014. "Experimental study on temperature variation in a porous inert media burner for premixed methane air combustion," Energy, Elsevier, vol. 72(C), pages 195-200.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kuntikana, Pramod & Prabhu, S.V., 2017. "Thermal investigations on methane-air premixed flame jets of multi-port burners," Energy, Elsevier, vol. 123(C), pages 218-228.
    2. Dong, L.L. & Cheung, C.S. & Leung, C.W., 2011. "Combustion optimization of a port-array inverse diffusion flame jet," Energy, Elsevier, vol. 36(5), pages 2834-2846.
    3. Sun, Mengxiao & Huang, Xiaomei & Hu, Yelong & Lyu, Shan, 2022. "Effects on the performance of domestic gas appliances operated on natural gas mixed with hydrogen," Energy, Elsevier, vol. 244(PA).
    4. Sutar, Kailasnath B. & M.R., Ravi & Kohli, Sangeeta, 2016. "Design of a partially aerated naturally aspirated burner for producer gas," Energy, Elsevier, vol. 116(P1), pages 773-785.
    5. Roberto Moreno-Soriano & Froylan Soriano-Moranchel & Luis Armando Flores-Herrera & Juan Manuel Sandoval-Pineda & Rosa de Guadalupe González-Huerta, 2020. "Thermal Efficiency of Oxyhydrogen Gas Burner," Energies, MDPI, vol. 13(20), pages 1-11, October.
    6. Arya, P.K. & Tupkari, S. & K., Satish & Thakre, G.D. & Shukla, B.M., 2016. "DME blended LPG as a cooking fuel option for Indian household: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1591-1601.
    7. Akter Lucky, Rahima & Hossain, Ijaz, 2001. "Efficiency study of Bangladeshi cookstoves with an emphasis on gas cookstoves," Energy, Elsevier, vol. 26(3), pages 221-237.
    8. Saberi Moghaddam, Mohammad Hossein & Saei Moghaddam, Mojtaba & Khorramdel, Mohammad, 2017. "Numerical study of geometric parameters effecting temperature and thermal efficiency in a premix multi-hole flat flame burner," Energy, Elsevier, vol. 125(C), pages 654-662.
    9. Mujeebu, M. Abdul & Abdullah, M.Z. & Mohamad, A.A., 2011. "Development of energy efficient porous medium burners on surface and submerged combustion modes," Energy, Elsevier, vol. 36(8), pages 5132-5139.
    10. Lee, Seungro & Kum, Sung-Min & Lee, Chang-Eon, 2011. "An experimental study of a cylindrical multi-hole premixed burner for the development of a condensing gas boiler," Energy, Elsevier, vol. 36(7), pages 4150-4157.
    11. Banerjee, Abhisek & Paul, Diplina, 2021. "Developments and applications of porous medium combustion: A recent review," Energy, Elsevier, vol. 221(C).
    12. Yu, Byeonghun & Kum, Sung-Min & Lee, Chang-Eon & Lee, Seungro, 2013. "Combustion characteristics and thermal efficiency for premixed porous-media types of burners," Energy, Elsevier, vol. 53(C), pages 343-350.
    13. Zhang, Yuchun & Yi, Weiming & Fu, Peng & Li, Zhihe & Bai, Xueyuan & Tian, Chunyan & Wang, Nana & Li, Yongjun, 2019. "Flow and reaction characteristics on catalytic upgrading of biomass pyrolysis vapors in novel cyclone reactors," Energy, Elsevier, vol. 189(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:5:p:3092-3100. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.