IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i5p2883-2889.html
   My bibliography  Save this article

Performance of a gas engine driven heat pump for hot water supply systems

Author

Listed:
  • Elgendy, E.
  • Schmidt, J.
  • Khalil, A.
  • Fatouh, M.

Abstract

The present work aimed at evaluating the experimental performance of a gas engine heat pump for hot water supply. In order to achieve this objective, a test facility was developed and experiments were performed over a wide range of ambient air temperature (10.9–25.3 °C), condenser water inlet temperature (33–49 °C) and at two engine speeds (1300 and 1750 rpm). Performance characteristics of the gas engine heat pump were characterized by water outlet temperatures, total heating capacity and primary energy ratio. The reported results revealed that hot water outlet temperature between 35 and 70 °C can be obtained over the considered range of the operating parameters. Also, total heating capacity and gas engine heat recovery decrease by 9.3 and 27.7%, respectively, while gas engine energy consumption increases by 17.5% when the condenser water inlet temperature changes from 33 to 49 °C. Total heating capacity, gas engine heat recovery and gas engine energy consumption at ambient air temperature of 25.3 °C are higher than those at ambient air temperature of 10.9 °C by about 10.9, 6.3 and 1.5% respectively. Moreover, system primary energy ratio decreases by 15.3% when the engine speed changes from 1300 to 1750 rpm.

Suggested Citation

  • Elgendy, E. & Schmidt, J. & Khalil, A. & Fatouh, M., 2011. "Performance of a gas engine driven heat pump for hot water supply systems," Energy, Elsevier, vol. 36(5), pages 2883-2889.
    • Handle: RePEc:eee:energy:v:36:y:2011:i:5:p:2883-2889
    DOI: 10.1016/j.energy.2011.02.030
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544211001083
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2011.02.030?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Garimella, Srinivas, 2003. "Innovations in energy efficient and environmentally friendly space-conditioning systems," Energy, Elsevier, vol. 28(15), pages 1593-1614.
    2. Elgendy, E. & Schmidt, J., 2010. "Experimental study of gas engine driven air to water heat pump in cooling mode," Energy, Elsevier, vol. 35(6), pages 2461-2467.
    3. Elgendy, E. & Schmidt, J. & Khalil, A. & Fatouh, M., 2010. "Performance of a gas engine heat pump (GEHP) using R410A for heating and cooling applications," Energy, Elsevier, vol. 35(12), pages 4941-4948.
    4. Sanaye, Sepehr & Chahartaghi, Mahmood, 2010. "Thermal modeling and operating tests for the gas engine-driven heat pump systems," Energy, Elsevier, vol. 35(1), pages 351-363.
    5. Greyvenstein, Gideon P. & Meyer, Josua P., 1991. "The viability of heat pumps for the heating of swimming pools in South Africa," Energy, Elsevier, vol. 16(7), pages 1031-1037.
    6. Meyer, Josua P. & Greyvenstein, Gideon P., 1991. "Hot water for homes in South Africa with heat pumps," Energy, Elsevier, vol. 16(7), pages 1039-1044.
    7. Sun, Z.G., 2008. "Experimental investigation of integrated refrigeration system (IRS) with gas engine, compression chiller and absorption chiller," Energy, Elsevier, vol. 33(3), pages 431-436.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Elgendy, E. & Schmidt, J. & Khalil, A. & Fatouh, M., 2011. "Modelling and validation of a gas engine heat pump working with R410A for cooling applications," Applied Energy, Elsevier, vol. 88(12), pages 4980-4988.
    2. Amiri Rad, Ehsan & Maddah, Saeed & Mohammadi, Saeed, 2020. "Designing and optimizing a novel cogeneration system for an office building based on thermo-economic and environmental analyses," Renewable Energy, Elsevier, vol. 151(C), pages 342-354.
    3. Yang, Zhao & Wu, Xi, 2013. "Retrofits and options for the alternatives to HCFC-22," Energy, Elsevier, vol. 59(C), pages 1-21.
    4. Hervás-Blasco, Estefanía & Navarro-Peris, Emilio & Corberán, José Miguel, 2019. "Optimal design and operation of a central domestic hot water heat pump system for a group of dwellings employing low temperature waste heat as a source," Energy, Elsevier, vol. 188(C).
    5. Bartosz Pawela & Marek Jaszczur, 2022. "Review of Gas Engine Heat Pumps," Energies, MDPI, vol. 15(13), pages 1-16, July.
    6. Sanaye, Sepehr & Chahartaghi, Mahmood & Asgari, Hesam, 2013. "Dynamic modeling of Gas Engine driven Heat Pump system in cooling mode," Energy, Elsevier, vol. 55(C), pages 195-208.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fatouh, M. & Elgendy, E., 2011. "Experimental investigation of a vapor compression heat pump used for cooling and heating applications," Energy, Elsevier, vol. 36(5), pages 2788-2795.
    2. Elgendy, E. & Schmidt, J., 2010. "Experimental study of gas engine driven air to water heat pump in cooling mode," Energy, Elsevier, vol. 35(6), pages 2461-2467.
    3. Bartosz Pawela & Marek Jaszczur, 2022. "Review of Gas Engine Heat Pumps," Energies, MDPI, vol. 15(13), pages 1-16, July.
    4. Sanaye, Sepehr & Chahartaghi, Mahmood & Asgari, Hesam, 2013. "Dynamic modeling of Gas Engine driven Heat Pump system in cooling mode," Energy, Elsevier, vol. 55(C), pages 195-208.
    5. Amiri Rad, Ehsan & Maddah, Saeed & Mohammadi, Saeed, 2020. "Designing and optimizing a novel cogeneration system for an office building based on thermo-economic and environmental analyses," Renewable Energy, Elsevier, vol. 151(C), pages 342-354.
    6. Sanaye, Sepehr & Chahartaghi, Mahmood, 2010. "Thermal modeling and operating tests for the gas engine-driven heat pump systems," Energy, Elsevier, vol. 35(1), pages 351-363.
    7. Elgendy, E. & Schmidt, J. & Khalil, A. & Fatouh, M., 2010. "Performance of a gas engine heat pump (GEHP) using R410A for heating and cooling applications," Energy, Elsevier, vol. 35(12), pages 4941-4948.
    8. Elgendy, E. & Schmidt, J. & Khalil, A. & Fatouh, M., 2011. "Modelling and validation of a gas engine heat pump working with R410A for cooling applications," Applied Energy, Elsevier, vol. 88(12), pages 4980-4988.
    9. Wang, Jieyue & Cai, Liang & Wang, Yanwei & Ma, Yanbin & Zhang, Xiaosong, 2013. "Modeling and optimization matching on drive system of a coaxial parallel-type hybrid-power gas engine heat pump," Energy, Elsevier, vol. 55(C), pages 1196-1204.
    10. Morgan Bazilian & Patrick Nussbaumer & Hans-Holger Rogner & Abeeku Brew-Hammond & Vivien Foster & Shonali Pachauri & Eric Williams & Mark Howells & Philippe Niyongabo & Lawrence Musaba & Brian Ó Galla, 2011. "Energy Access Scenarios to 2030 for the Power Sector in Sub-Saharan Africa," Working Papers 2011.68, Fondazione Eni Enrico Mattei.
    11. Muhsin Kılıç, 2022. "Evaluation of Combined Thermal–Mechanical Compression Systems: A Review for Energy Efficient Sustainable Cooling," Sustainability, MDPI, vol. 14(21), pages 1-38, October.
    12. Jonathan Ibarra-Bahena & Rosenberg J. Romero, 2014. "Performance of Different Experimental Absorber Designs in Absorption Heat Pump Cycle Technologies: A Review," Energies, MDPI, vol. 7(2), pages 1-16, February.
    13. Janghorban Esfahani, Iman & Kang, Yong Tae & Yoo, ChangKyoo, 2014. "A high efficient combined multi-effect evaporation–absorption heat pump and vapor-compression refrigeration part 1: Energy and economic modeling and analysis," Energy, Elsevier, vol. 75(C), pages 312-326.
    14. Qingkun Meng & Liang Cai & Wenxiu Ji & Jie Yan & Tao Zhang & Xiaosong Zhang, 2015. "Energy Management of a Hybrid-Power Gas Engine-Driven Heat Pump," Energies, MDPI, vol. 8(10), pages 1-22, October.
    15. Jia, Teng & Dou, Pengbo & Chu, Peng & Dai, Yanjun, 2020. "Proposal and performance analysis of a novel solar-assisted resorption-subcooled compression hybrid heat pump system for space heating in cold climate condition," Renewable Energy, Elsevier, vol. 150(C), pages 1136-1150.
    16. Gazda, Wiesław & Kozioł, Joachim, 2013. "The estimation of energy efficiency for hybrid refrigeration system," Applied Energy, Elsevier, vol. 101(C), pages 49-57.
    17. Yang, Zhao & Wu, Xi, 2013. "Retrofits and options for the alternatives to HCFC-22," Energy, Elsevier, vol. 59(C), pages 1-21.
    18. Gungor, Aysegul & Erbay, Zafer & Hepbasli, Arif, 2011. "Exergetic analysis and evaluation of a new application of gas engine heat pumps (GEHPs) for food drying processes," Applied Energy, Elsevier, vol. 88(3), pages 882-891, March.
    19. Chen, Tao & Cai, Liang & Wen, Xiantai & Zhang, Xiaosong, 2021. "Experimental research and energy consumption analysis on the economic performance of a hybrid-power gas engine heat pump with LiFePO4 battery," Energy, Elsevier, vol. 214(C).
    20. Gungor, Aysegul & Erbay, Zafer & Hepbasli, Arif, 2011. "Exergoeconomic analyses of a gas engine driven heat pump drier and food drying process," Applied Energy, Elsevier, vol. 88(8), pages 2677-2684, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:5:p:2883-2889. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.