IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v32y2007i11p2121-2134.html
   My bibliography  Save this article

Exergy loss analysis of heat transfer across the wall of the dividing-wall distillation column

Author

Listed:
  • Suphanit, B.
  • Bischert, A.
  • Narataruksa, P.

Abstract

The dividing-wall distillation column is thermodynamically equivalent to the Petlyuk column on the condition that no heat transfer is allowed across the dividing wall. However, better energy efficiency of the column may be obtained if heat transfer occurs within a certain part of the wall. The effects of heat transfer across the dividing wall can be analyzed by using the column grand composite curve (CGCC). The heat transfer potential across the wall can be observed by looking at the CGCC of both column sections alongside the dividing wall. However, the possibility of whether heat should be added or rejected at any stage is not clearly known ahead of the CGCC. Consequently, in this work, the exergy analysis is applied to the dividing-wall column in order to determine whether heat should be added or rejected at any particular stage. Also, the minimum exergy loss value in the column is set as the criterion for determining the heat load targets at any stage. These load targets can then be plotted as a T–H profile similar to the CGCC. This methodology was reported to successfully apply to the column with multiple feeds and products. After having identified the locations and quantities of the feasible heat transfer across the dividing wall, the benefits are discussed via three case studies.

Suggested Citation

  • Suphanit, B. & Bischert, A. & Narataruksa, P., 2007. "Exergy loss analysis of heat transfer across the wall of the dividing-wall distillation column," Energy, Elsevier, vol. 32(11), pages 2121-2134.
    • Handle: RePEc:eee:energy:v:32:y:2007:i:11:p:2121-2134
    DOI: 10.1016/j.energy.2007.04.006
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544207000710
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2007.04.006?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rivero, Ricardo, 2001. "Exergy simulation and optimization of adiabatic and diabatic binary distillation," Energy, Elsevier, vol. 26(6), pages 561-593.
    2. Rivero, R. & Garcia, M. & Urquiza, J., 2004. "Simulation, exergy analysis and application of diabatic distillation to a tertiary amyl methyl ether production unit of a crude oil refinery," Energy, Elsevier, vol. 29(3), pages 467-489.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Kiss, Anton A. & Flores Landaeta, Servando J. & Infante Ferreira, Carlos A., 2012. "Towards energy efficient distillation technologies – Making the right choice," Energy, Elsevier, vol. 47(1), pages 531-542.
    2. Khoa, T.D. & Shuhaimi, M. & Nam, H.M., 2012. "Application of three dimensional exergy analysis curves for absorption columns," Energy, Elsevier, vol. 37(1), pages 273-280.
    3. İpek, Osman & Kılıç, Bayram & Gürel, Barış, 2017. "Experimental investigation of exergy loss analysis in newly designed compact heat exchangers," Energy, Elsevier, vol. 124(C), pages 330-335.
    4. Zhang, Hongru & Wang, Shuai & Tang, Jiaxuan & Li, Ningning & Li, Yanan & Cui, Peizhe & Wang, Yinglong & Zheng, Shiqing & Zhu, Zhaoyou & Ma, Yixin, 2021. "Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis," Energy, Elsevier, vol. 229(C).
    5. Khalili-Garakani, Amirhossein & Ivakpour, Javad & Kasiri, Norollah, 2016. "Evolutionary synthesis of optimum light ends recovery unit with exergy analysis application," Applied Energy, Elsevier, vol. 168(C), pages 507-522.
    6. Kim, Young Han, 2015. "Energy saving of side-column DWCs for quaternary separation," Energy, Elsevier, vol. 86(C), pages 617-626.
    7. Kim, Young Han, 2016. "Energy saving of benzene separation process for environmentally friendly gasoline using an extended DWC (divided wall column)," Energy, Elsevier, vol. 100(C), pages 58-65.
    8. Cossio-Vargas, E. & Hernandez, S. & Segovia-Hernandez, J.G. & Cano-Rodriguez, M.I., 2011. "Simulation study of the production of biodiesel using feedstock mixtures of fatty acids in complex reactive distillation columns," Energy, Elsevier, vol. 36(11), pages 6289-6297.
    9. Choe, Changgwon & Haider, Junaid & Lim, Hankwon, 2023. "Carbon capture and liquefaction from methane steam reforming unit: 4E’s analysis (Energy, Exergy, Economic, and Environmental)," Applied Energy, Elsevier, vol. 332(C).
    10. Haragovics, Máté & Mizsey, Péter, 2014. "A novel application of exergy analysis: Lean manufacturing tool to improve energy efficiency and flexibility of hydrocarbon processing," Energy, Elsevier, vol. 77(C), pages 382-390.
    11. Khalili-Garakani, Amirhossein & Ivakpour, Javad & Kasiri, Norollah, 2016. "A new search space reduction method based on exergy analysis for distillation columns synthesis," Energy, Elsevier, vol. 116(P1), pages 795-811.
    12. Kim, Young Han, 2014. "Application of partially diabatic divided wall column to floating liquefied natural gas plant," Energy, Elsevier, vol. 70(C), pages 435-443.
    13. Nguyen, Nghi & Demirel, Yaşar, 2011. "Using thermally coupled reactive distillation columns in biodiesel production," Energy, Elsevier, vol. 36(8), pages 4838-4847.
    14. Castelo Branco, David A. & Szklo, Alexandre & Gomes, Gabriel & Borba, Bruno S.M.C. & Schaeffer, Roberto, 2011. "Abatement costs of CO2 emissions in the Brazilian oil refining sector," Applied Energy, Elsevier, vol. 88(11), pages 3782-3790.
    15. Sun, Jinsheng & Wang, Fan & Ma, Tingting & Gao, Hong & Liu, Yanzhen & Cai, Fang, 2012. "Exergy analysis of a parallel double-effect organosilicon monomer distillation scheme," Energy, Elsevier, vol. 47(1), pages 498-504.
    16. Sun, Jinsheng & Dai, Leilei & Shi, Ming & Gao, Hong & Cao, Xijia & Liu, Guangxin, 2014. "Further optimization of a parallel double-effect organosilicon distillation scheme through exergy analysis," Energy, Elsevier, vol. 69(C), pages 370-377.
    17. Khoa, T.D. & Shuhaimi, M. & Hashim, H. & Panjeshahi, M.H., 2010. "Optimal design of distillation column using three dimensional exergy analysis curves," Energy, Elsevier, vol. 35(12), pages 5309-5319.
    18. Long, Nguyen Van Duc & Lee, Moonyong, 2015. "A hybrid technology combining heat pump and thermally coupled distillation sequence for retrofit and debottlenecking," Energy, Elsevier, vol. 81(C), pages 103-110.
    19. Sun, Jinsheng & Wang, Fan & Ma, Tingting & Gao, Hong & Wu, Peng & Liu, Lili, 2012. "Energy and exergy analysis of a five-column methanol distillation scheme," Energy, Elsevier, vol. 45(1), pages 696-703.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nguyen, Nghi & Demirel, Yaşar, 2010. "Retrofit of distillation columns in biodiesel production plants," Energy, Elsevier, vol. 35(4), pages 1625-1632.
    2. Chen, Ting & Zhang, Bingjian & Chen, Qinglin, 2014. "Heat integration of fractionating systems in para-xylene plants based on column optimization," Energy, Elsevier, vol. 72(C), pages 311-321.
    3. Hernández, Salvador & Gabriel Segovia-Hernández, Juan & Rico-Ramírez, Vicente, 2006. "Thermodynamically equivalent distillation schemes to the Petlyuk column for ternary mixtures," Energy, Elsevier, vol. 31(12), pages 2176-2183.
    4. Zhang, Xiaosong & Han, Wei & Hong, Hui & Jin, Hongguang, 2009. "A chemical intercooling gas turbine cycle with chemical-looping combustion," Energy, Elsevier, vol. 34(12), pages 2131-2136.
    5. Khalili-Garakani, Amirhossein & Ivakpour, Javad & Kasiri, Norollah, 2016. "Evolutionary synthesis of optimum light ends recovery unit with exergy analysis application," Applied Energy, Elsevier, vol. 168(C), pages 507-522.
    6. Khoa, T.D. & Shuhaimi, M. & Hashim, H. & Panjeshahi, M.H., 2010. "Optimal design of distillation column using three dimensional exergy analysis curves," Energy, Elsevier, vol. 35(12), pages 5309-5319.
    7. Khoa, T.D. & Shuhaimi, M. & Nam, H.M., 2012. "Application of three dimensional exergy analysis curves for absorption columns," Energy, Elsevier, vol. 37(1), pages 273-280.
    8. Cortés, E. & Rivera, W., 2010. "Exergetic and exergoeconomic optimization of a cogeneration pulp and paper mill plant including the use of a heat transformer," Energy, Elsevier, vol. 35(3), pages 1289-1299.
    9. Silva, J.A.M. & Oliveira, S., 2014. "An exergy-based approach to determine production cost and CO2 allocation in refineries," Energy, Elsevier, vol. 67(C), pages 607-616.
    10. Hessam Golmohamadi & Amin Asadi, 2020. "Integration of Joint Power-Heat Flexibility of Oil Refinery Industries to Uncertain Energy Markets," Energies, MDPI, vol. 13(18), pages 1-25, September.
    11. Wei, Zhiqiang & Zhang, Bingjian & Wu, Shengyuan & Chen, Qinglin & Tsatsaronis, George, 2012. "Energy-use analysis and evaluation of distillation systems through avoidable exergy destruction and investment costs," Energy, Elsevier, vol. 42(1), pages 424-433.
    12. Olujić, Ž. & Sun, L. & de Rijke, A. & Jansens, P.J., 2006. "Conceptual design of an internally heat integrated propylene-propane splitter," Energy, Elsevier, vol. 31(15), pages 3083-3096.
    13. Rizk, J. & Nemer, M. & Clodic, D., 2012. "A real column design exergy optimization of a cryogenic air separation unit," Energy, Elsevier, vol. 37(1), pages 417-429.
    14. Nguyen, Nghi & Demirel, Yaşar, 2011. "Using thermally coupled reactive distillation columns in biodiesel production," Energy, Elsevier, vol. 36(8), pages 4838-4847.
    15. Sun, Jinsheng & Wang, Fan & Ma, Tingting & Gao, Hong & Wu, Peng & Liu, Lili, 2012. "Energy and exergy analysis of a five-column methanol distillation scheme," Energy, Elsevier, vol. 45(1), pages 696-703.
    16. Nur Izyan, Z. & Shuhaimi, M., 2014. "Exergy analysis for fuel reduction strategies in crude distillation unit," Energy, Elsevier, vol. 66(C), pages 891-897.
    17. de Koeijer, Gelein & Røsjorde, Audun & Kjelstrup, Signe, 2004. "Distribution of heat exchange in optimum diabatic distillation columns," Energy, Elsevier, vol. 29(12), pages 2425-2440.
    18. Alcántara-Avila, J.Rafael & Sotowa, Ken-Ichiro & Horikawa, Toshihide, 2015. "Entropy production and economic analysis in diabatic distillation columns with heat exchangers in series," Energy, Elsevier, vol. 93(P2), pages 1719-1730.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:32:y:2007:i:11:p:2121-2134. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.