IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v261y2022ipas0360544222021351.html
   My bibliography  Save this article

Experimental study on morphology, nanostructure and oxidation reactivity of particles in diesel engine with exhaust gas recirculation (EGR) burned with different alternative fuels

Author

Listed:
  • Hua, Yan
  • Wang, Zhong
  • Li, Ruina
  • Liu, Shuai
  • Zhao, Yang
  • Qu, Lei
  • Mei, Deqing
  • Lv, Hui

Abstract

Experiments were conducted at a diesel engine with exhaust gas recirculation (EGR), and the particulates produced by the combustion of Fischer-Tropsch (F-T) diesel, biodiesel as well as diesel were collected. The influences of fuel characteristics upon the morphology, nanostructure and oxidation reactivity of particles were explored by high-resolution transmission electron microscope (HRTEM), Raman spectroscopy (RS) and thermogravimetry (TGA). The results show that compared with diesel, F-T diesel particulates possess smaller fractal dimension (Df) and fringe tortuosity (Tf), lower the area ratio of D1 peak to G peak (AD1/AG) and half peak width of D1 peak (D1-FWHM), longer fringe length (La), shorter separation distance (d), higher oxidation characteristic temperature and apparent reactive energy (Ea), while biodiesel particulates exhibit the opposite features. Among the samples, F-T diesel particulates display the highest graphitization degree and the lowest oxidation reactivity, biodiesel particulates present the most disorderly nanostructure and are more easily oxidized. The application of EGR increases the agglomeration degree, reduces the graphitization degree and oxidation characteristic temperature, and enhances the oxidation reactivity of particulate. Compared with the particulates collected without EGR, the Ea of FT diesel, biodiesel, and diesel particulates are reduced by 36.7%, 41.2%, and 37.5% as the EGR rate is 30%.

Suggested Citation

  • Hua, Yan & Wang, Zhong & Li, Ruina & Liu, Shuai & Zhao, Yang & Qu, Lei & Mei, Deqing & Lv, Hui, 2022. "Experimental study on morphology, nanostructure and oxidation reactivity of particles in diesel engine with exhaust gas recirculation (EGR) burned with different alternative fuels," Energy, Elsevier, vol. 261(PA).
    • Handle: RePEc:eee:energy:v:261:y:2022:i:pa:s0360544222021351
    DOI: 10.1016/j.energy.2022.125249
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222021351
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125249?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sun, Chunhua & Liu, Yu & Qiao, Xinqi & Ju, Dehao & Tang, Qing & Fang, Xiaoyuan & Zhou, Feng, 2020. "Experimental study of effects of exhaust gas recirculation on combustion, performance, and emissions of DME-biodiesel fueled engine," Energy, Elsevier, vol. 197(C).
    2. Jaliliantabar, Farzad & Ghobadian, Barat & Carlucci, Antonio Paolo & Najafi, Gholamhassan & Mamat, Rizalman & Ficarella, Antonio & Strafella, Luciano & Santino, Angelo & De Domenico, Stefania, 2020. "A comprehensive study on the effect of pilot injection, EGR rate, IMEP and biodiesel characteristics on a CRDI diesel engine," Energy, Elsevier, vol. 194(C).
    3. Wang, Yuesen & Liang, Xingyu & Shu, Gequn & Wang, Xu & Bao, Jingkuan & Liu, Changwen, 2014. "Effect of lubricating oil additive package on the characterization of diesel particles," Applied Energy, Elsevier, vol. 136(C), pages 682-691.
    4. Simsek, Suleyman & Uslu, Samet & Simsek, Hatice & Uslu, Gonca, 2021. "Multi-objective-optimization of process parameters of diesel engine fueled with biodiesel/2-ethylhexyl nitrate by using Taguchi method," Energy, Elsevier, vol. 231(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Serhiy Serbin & Mykola Radchenko & Anatoliy Pavlenko & Kateryna Burunsuz & Andrii Radchenko & Daifen Chen, 2023. "Improving Ecological Efficiency of Gas Turbine Power System by Combusting Hydrogen and Hydrogen-Natural Gas Mixtures," Energies, MDPI, vol. 16(9), pages 1-23, April.
    2. Zongming Yang & Victoria Kornienko & Mykola Radchenko & Andrii Radchenko & Roman Radchenko, 2022. "Research of Exhaust Gas Boiler Heat Exchange Surfaces with Reduced Corrosion When Water-Fuel Emulsion Combustion," Sustainability, MDPI, vol. 14(19), pages 1-21, September.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yaman, Hayri & Yesilyurt, Murat Kadir & Uslu, Samet, 2022. "Simultaneous optimization of multiple engine parameters of a 1-heptanol / gasoline fuel blends operated a port-fuel injection spark-ignition engine using response surface methodology approach," Energy, Elsevier, vol. 238(PC).
    2. Uslu, Samet & Simsek, Suleyman & Simsek, Hatice, 2023. "RSM modeling of different amounts of nano-TiO2 supplementation to a diesel engine running with hemp seed oil biodiesel/diesel fuel blends," Energy, Elsevier, vol. 266(C).
    3. Simsek, Suleyman & Uslu, Samet & Simsek, Hatice, 2022. "Proportional impact prediction model of animal waste fat-derived biodiesel by ANN and RSM technique for diesel engine," Energy, Elsevier, vol. 239(PD).
    4. Manimaran, Rajayokkiam & Mohanraj, Thangavelu & Venkatesan, Moorthy & Ganesan, Rajamohan & Balasubramanian, Dhinesh, 2022. "A computational technique for prediction and optimization of VCR engine performance and emission parameters fuelled with Trichosanthes cucumerina biodiesel using RSM with desirability function approac," Energy, Elsevier, vol. 254(PB).
    5. Elsayed Abdelhameed & Hiroshi Tashima, 2022. "EGR and Emulsified Fuel Combination Effects on the Combustion, Performance, and NOx Emissions in Marine Diesel Engines," Energies, MDPI, vol. 16(1), pages 1-22, December.
    6. Zhang, Jun & Wong, Victor W. & Shuai, Shijin & Chen, Yu & Sappok, Alexander, 2018. "Quantitative estimation of the impact of ash accumulation on diesel particulate filter related fuel penalty for a typical modern on-road heavy-duty diesel engine," Applied Energy, Elsevier, vol. 229(C), pages 1010-1023.
    7. Simsek, Suleyman & Uslu, Samet & Simsek, Hatice & Uslu, Gonca, 2021. "Multi-objective-optimization of process parameters of diesel engine fueled with biodiesel/2-ethylhexyl nitrate by using Taguchi method," Energy, Elsevier, vol. 231(C).
    8. Vallapudi Dhana Raju & Ibham Veza & Harish Venu & Manzoore Elahi M. Soudagar & M. A. Kalam & Tansir Ahamad & Prabhu Appavu & Jayashri N. Nair & S. M. Ashrafur Rahman, 2023. "Comprehensive Analysis of Compression Ratio, Exhaust Gas Recirculation, and Pilot Fuel Injection in a Diesel Engine Fuelled with Tamarind Biodiesel," Sustainability, MDPI, vol. 15(21), pages 1-21, October.
    9. Josef Maroušek & Anna Maroušková, 2021. "Economic Considerations on Nutrient Utilization in Wastewater Management," Energies, MDPI, vol. 14(12), pages 1-16, June.
    10. Nguyen Xuan Khoa & Ocktaeck Lim, 2022. "A Review of the External and Internal Residual Exhaust Gas in the Internal Combustion Engine," Energies, MDPI, vol. 15(3), pages 1-21, February.
    11. Eko Supriyanto & Jayan Sentanuhady & Ariyana Dwiputra & Ari Permana & Muhammad Akhsin Muflikhun, 2021. "The Recent Progress of Natural Sources and Manufacturing Process of Biodiesel: A Review," Sustainability, MDPI, vol. 13(10), pages 1-26, May.
    12. Ahmed Sule & Zulkarnain Abdul Latiff & Mohd Azman Abas & Ibham Veza & Manzoore Elahi M. Soudagar & Irianto Harny & Vorathin Epin, 2023. "Dual Effects of N-Butanol and Magnetite Nanoparticle to Biodiesel-Diesel Fuel Blends as Additives on Emission Pattern and Performance of a Diesel Engine with ANN Validation," Sustainability, MDPI, vol. 15(2), pages 1-22, January.
    13. Huiqiong Huang & Jie Tian & Jiangtao Li & Dongli Tan, 2022. "Effects of Different Exhaust Gas Recirculation (EGR) Rates on Combustion and Emission Characteristics of Biodiesel–Diesel Blended Fuel Based on an Improved Chemical Mechanism," Energies, MDPI, vol. 15(11), pages 1-23, June.
    14. Shah, Pinkesh R. & Gaitonde, U.N. & Ganesh, Anuradda, 2018. "Influence of soy-lecithin as bio-additive with straight vegetable oil on CI engine characteristics," Renewable Energy, Elsevier, vol. 115(C), pages 685-696.
    15. Oni, Babalola Aisosa & Sanni, Samuel Eshorame & Ibegbu, Anayo Jerome & Tomomewo, Olusegun Stanley, 2023. "Evaluation of engine characteristics of a micro-gas turbine powered with JETA1 fuel mixed with Afzelia biodiesel and dimethyl ether (DME)," Renewable Energy, Elsevier, vol. 216(C).
    16. Rahmani, R. & Rahnejat, H. & Fitzsimons, B. & Dowson, D., 2017. "The effect of cylinder liner operating temperature on frictional loss and engine emissions in piston ring conjunction," Applied Energy, Elsevier, vol. 191(C), pages 568-581.
    17. Zandie, Mohammad & Ng, Hoon Kiat & Muhamad Said, Mohd Farid & Cheng, Xinwei & Gan, Suyin, 2023. "Performance of a compression ignition engine fuelled with diesel-palm biodiesel-gasoline mixtures: CFD and multi parameter optimisation studies," Energy, Elsevier, vol. 274(C).
    18. Taejung Kim & Jungsoo Park & Honghyun Cho, 2020. "Emission Characteristics under Diesel and Biodiesel Fueled Compression Ignition Engine with Various Injector Holes and EGR Conditions," Energies, MDPI, vol. 13(11), pages 1-14, June.
    19. Ornella Chiavola & Edoardo Frattini & Simone Lancione & Fulvio Palmieri, 2021. "Operation Cycle of Diesel CR Injection Pump via Pressure Measurement in Piston Working Chamber," Energies, MDPI, vol. 14(17), pages 1-21, August.
    20. Murugapoopathi, S. & Surendarnath, S. & Ramachandran, T. & Amesho, Kassian T.T. & Senthil, S., 2023. "Energy and exergy analysis of VCR engine fueled with rubber-seed oil methyl ester using response surface methodology," Energy, Elsevier, vol. 280(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:261:y:2022:i:pa:s0360544222021351. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.