IDEAS home Printed from https://ideas.repec.org/a/eee/ejores/v205y2010i3p699-708.html
   My bibliography  Save this article

An integer programming model for two- and three-stage two-dimensional cutting stock problems

Author

Listed:
  • Silva, Elsa
  • Alvelos, Filipe
  • Valério de Carvalho, J.M.

Abstract

In this paper, an integer programming model for two-dimensional cutting stock problems is proposed. In the problems addressed, it is intended to cut a set of small rectangular items of given sizes from a set of larger rectangular plates in such a way that the total number of used plates is minimized. The two-stage and three-stage, exact and non-exact, problems are considered. Other issues are also addressed, as the rotation of items, the length of the cuts and the value of the remaining plates. The new integer programming model can be seen as an extension of the "one-cut model" proposed by Dyckhoff for the one-dimensional cutting stock problem. In the proposed model, each decision variable is associated with cutting one item from a plate or from a part of a plate resulting from previous cuts (residual plates). Comparative computational results of the proposed model and of models from the literature are presented and discussed.

Suggested Citation

  • Silva, Elsa & Alvelos, Filipe & Valério de Carvalho, J.M., 2010. "An integer programming model for two- and three-stage two-dimensional cutting stock problems," European Journal of Operational Research, Elsevier, vol. 205(3), pages 699-708, September.
    • Handle: RePEc:eee:ejores:v:205:y:2010:i:3:p:699-708
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0377-2217(10)00073-1
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. François Vanderbeck, 2001. "A Nested Decomposition Approach to a Three-Stage, Two-Dimensional Cutting-Stock Problem," Management Science, INFORMS, vol. 47(6), pages 864-879, June.
    2. Wascher, Gerhard & Hau[ss]ner, Heike & Schumann, Holger, 2007. "An improved typology of cutting and packing problems," European Journal of Operational Research, Elsevier, vol. 183(3), pages 1109-1130, December.
    3. Mhand Hifi & Catherine Roucairol, 2001. "Approximate and Exact Algorithms for Constrained (Un) Weighted Two-dimensional Two-staged Cutting Stock Problems," Journal of Combinatorial Optimization, Springer, vol. 5(4), pages 465-494, December.
    4. Harald Dyckhoff, 1981. "A New Linear Programming Approach to the Cutting Stock Problem," Operations Research, INFORMS, vol. 29(6), pages 1092-1104, December.
    5. Lodi, Andrea & Martello, Silvano & Monaci, Michele, 2002. "Two-dimensional packing problems: A survey," European Journal of Operational Research, Elsevier, vol. 141(2), pages 241-252, September.
    6. Belov, G. & Scheithauer, G., 2006. "A branch-and-cut-and-price algorithm for one-dimensional stock cutting and two-dimensional two-stage cutting," European Journal of Operational Research, Elsevier, vol. 171(1), pages 85-106, May.
    7. Andrea Lodi & Silvano Martello & Daniele Vigo, 2004. "Models and Bounds for Two-Dimensional Level Packing Problems," Journal of Combinatorial Optimization, Springer, vol. 8(3), pages 363-379, September.
    8. Cintra, G.F. & Miyazawa, F.K. & Wakabayashi, Y. & Xavier, E.C., 2008. "Algorithms for two-dimensional cutting stock and strip packing problems using dynamic programming and column generation," European Journal of Operational Research, Elsevier, vol. 191(1), pages 61-85, November.
    9. Puchinger, Jakob & Raidl, Gunther R., 2007. "Models and algorithms for three-stage two-dimensional bin packing," European Journal of Operational Research, Elsevier, vol. 183(3), pages 1304-1327, December.
    10. P. C. Gilmore & R. E. Gomory, 1965. "Multistage Cutting Stock Problems of Two and More Dimensions," Operations Research, INFORMS, vol. 13(1), pages 94-120, February.
    11. David Pisinger & Mikkel Sigurd, 2007. "Using Decomposition Techniques and Constraint Programming for Solving the Two-Dimensional Bin-Packing Problem," INFORMS Journal on Computing, INFORMS, vol. 19(1), pages 36-51, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Cui, Yaodong & Huang, Baixiong, 2012. "Reducing the number of cuts in generating three-staged cutting patterns," European Journal of Operational Research, Elsevier, vol. 218(2), pages 358-365.
    2. Jean-François Côté & Manuel Iori, 2018. "The Meet-in-the-Middle Principle for Cutting and Packing Problems," INFORMS Journal on Computing, INFORMS, vol. 30(4), pages 646-661, November.
    3. Parreño, F. & Alonso, M.T. & Alvarez-Valdes, R., 2020. "Solving a large cutting problem in the glass manufacturing industry," European Journal of Operational Research, Elsevier, vol. 287(1), pages 378-388.
    4. Jianyu Long & Zhong Zheng & Xiaoqiang Gao & Panos M. Pardalos & Wanzhe Hu, 2020. "An effective heuristic based on column generation for the two-dimensional three-stage steel plate cutting problem," Annals of Operations Research, Springer, vol. 289(2), pages 291-311, June.
    5. Iori, Manuel & de Lima, Vinícius L. & Martello, Silvano & Miyazawa, Flávio K. & Monaci, Michele, 2021. "Exact solution techniques for two-dimensional cutting and packing," European Journal of Operational Research, Elsevier, vol. 289(2), pages 399-415.
    6. Parreño, F. & Alvarez-Valdes, R., 2021. "Mathematical models for a cutting problem in the glass manufacturing industry," Omega, Elsevier, vol. 103(C).
    7. Cui, Yaodong & Yang, Liu & Zhao, Zhigang & Tang, Tianbing & Yin, Mengxiao, 2013. "Sequential grouping heuristic for the two-dimensional cutting stock problem with pattern reduction," International Journal of Production Economics, Elsevier, vol. 144(2), pages 432-439.
    8. Douglas Nogueira Nascimento & Adriana Cristina Cherri & José Fernando Oliveira, 2022. "The two-dimensional cutting stock problem with usable leftovers: mathematical modelling and heuristic approaches," Operational Research, Springer, vol. 22(5), pages 5363-5403, November.
    9. de Lima, Vinícius L. & Alves, Cláudio & Clautiaux, François & Iori, Manuel & Valério de Carvalho, José M., 2022. "Arc flow formulations based on dynamic programming: Theoretical foundations and applications," European Journal of Operational Research, Elsevier, vol. 296(1), pages 3-21.
    10. François Clautiaux & Ruslan Sadykov & François Vanderbeck & Quentin Viaud, 2019. "Pattern-based diving heuristics for a two-dimensional guillotine cutting-stock problem with leftovers," EURO Journal on Computational Optimization, Springer;EURO - The Association of European Operational Research Societies, vol. 7(3), pages 265-297, September.
    11. Cui, Yaodong & Zhao, Zhigang, 2013. "Heuristic for the rectangular two-dimensional single stock size cutting stock problem with two-staged patterns," European Journal of Operational Research, Elsevier, vol. 231(2), pages 288-298.
    12. Martinovic, J. & Scheithauer, G. & Valério de Carvalho, J.M., 2018. "A comparative study of the arcflow model and the one-cut model for one-dimensional cutting stock problems," European Journal of Operational Research, Elsevier, vol. 266(2), pages 458-471.
    13. Silva, Elsa & Oliveira, José Fernando & Silveira, Tiago & Mundim, Leandro & Carravilla, Maria Antónia, 2023. "The Floating-Cuts model: a general and flexible mixed-integer programming model for non-guillotine and guillotine rectangular cutting problems," Omega, Elsevier, vol. 114(C).
    14. Yi-Ping Cui & Yongwu Zhou & Yaodong Cui, 2017. "Triple-solution approach for the strip packing problem with two-staged patterns," Journal of Combinatorial Optimization, Springer, vol. 34(2), pages 588-604, August.
    15. Pedroso, João Pedro, 2020. "Heuristics for packing semifluids," European Journal of Operational Research, Elsevier, vol. 282(3), pages 823-834.
    16. Fabio Furini & Enrico Malaguti & Dimitri Thomopulos, 2016. "Modeling Two-Dimensional Guillotine Cutting Problems via Integer Programming," INFORMS Journal on Computing, INFORMS, vol. 28(4), pages 736-751, November.
    17. Wei, Lijun & Tian, Tian & Zhu, Wenbin & Lim, Andrew, 2014. "A block-based layer building approach for the 2D guillotine strip packing problem," European Journal of Operational Research, Elsevier, vol. 239(1), pages 58-69.
    18. Rapine, Christophe & Pedroso, Joao Pedro & Akbalik, Ayse, 2022. "The two-dimensional knapsack problem with splittable items in stacks," Omega, Elsevier, vol. 112(C).
    19. Hadj Salem, Khadija & Silva, Elsa & Oliveira, José Fernando & Carravilla, Maria Antónia, 2023. "Mathematical models for the two-dimensional variable-sized cutting stock problem in the home textile industry," European Journal of Operational Research, Elsevier, vol. 306(2), pages 549-566.
    20. Michele Monaci & André Gustavo Santos, 2018. "Minimum tiling of a rectangle by squares," Annals of Operations Research, Springer, vol. 271(2), pages 831-851, December.
    21. Nestor M Cid-Garcia & Yasmin A Rios-Solis, 2020. "Positions and covering: A two-stage methodology to obtain optimal solutions for the 2d-bin packing problem," PLOS ONE, Public Library of Science, vol. 15(4), pages 1-22, April.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Iori, Manuel & de Lima, Vinícius L. & Martello, Silvano & Miyazawa, Flávio K. & Monaci, Michele, 2021. "Exact solution techniques for two-dimensional cutting and packing," European Journal of Operational Research, Elsevier, vol. 289(2), pages 399-415.
    2. Hadj Salem, Khadija & Silva, Elsa & Oliveira, José Fernando & Carravilla, Maria Antónia, 2023. "Mathematical models for the two-dimensional variable-sized cutting stock problem in the home textile industry," European Journal of Operational Research, Elsevier, vol. 306(2), pages 549-566.
    3. Jianyu Long & Zhong Zheng & Xiaoqiang Gao & Panos M. Pardalos & Wanzhe Hu, 2020. "An effective heuristic based on column generation for the two-dimensional three-stage steel plate cutting problem," Annals of Operations Research, Springer, vol. 289(2), pages 291-311, June.
    4. Fabio Furini & Enrico Malaguti & Dimitri Thomopulos, 2016. "Modeling Two-Dimensional Guillotine Cutting Problems via Integer Programming," INFORMS Journal on Computing, INFORMS, vol. 28(4), pages 736-751, November.
    5. Silva, Elsa & Oliveira, José Fernando & Silveira, Tiago & Mundim, Leandro & Carravilla, Maria Antónia, 2023. "The Floating-Cuts model: a general and flexible mixed-integer programming model for non-guillotine and guillotine rectangular cutting problems," Omega, Elsevier, vol. 114(C).
    6. Parreño, F. & Alvarez-Valdes, R., 2021. "Mathematical models for a cutting problem in the glass manufacturing industry," Omega, Elsevier, vol. 103(C).
    7. Delorme, Maxence & Iori, Manuel & Martello, Silvano, 2016. "Bin packing and cutting stock problems: Mathematical models and exact algorithms," European Journal of Operational Research, Elsevier, vol. 255(1), pages 1-20.
    8. Cui, Yaodong & Huang, Baixiong, 2012. "Reducing the number of cuts in generating three-staged cutting patterns," European Journal of Operational Research, Elsevier, vol. 218(2), pages 358-365.
    9. Oliviana Xavier Nascimento & Thiago Alves Queiroz & Leonardo Junqueira, 2022. "A MIP-CP based approach for two- and three-dimensional cutting problems with staged guillotine cuts," Annals of Operations Research, Springer, vol. 316(2), pages 805-835, September.
    10. Cui, Yaodong & Yang, Liu & Zhao, Zhigang & Tang, Tianbing & Yin, Mengxiao, 2013. "Sequential grouping heuristic for the two-dimensional cutting stock problem with pattern reduction," International Journal of Production Economics, Elsevier, vol. 144(2), pages 432-439.
    11. Ortmann, Frank G. & Ntene, Nthabiseng & van Vuuren, Jan H., 2010. "New and improved level heuristics for the rectangular strip packing and variable-sized bin packing problems," European Journal of Operational Research, Elsevier, vol. 203(2), pages 306-315, June.
    12. Malaguti, Enrico & Medina Durán, Rosa & Toth, Paolo, 2014. "Approaches to real world two-dimensional cutting problems," Omega, Elsevier, vol. 47(C), pages 99-115.
    13. Wascher, Gerhard & Hau[ss]ner, Heike & Schumann, Holger, 2007. "An improved typology of cutting and packing problems," European Journal of Operational Research, Elsevier, vol. 183(3), pages 1109-1130, December.
    14. Jean-François Côté & Manuel Iori, 2018. "The Meet-in-the-Middle Principle for Cutting and Packing Problems," INFORMS Journal on Computing, INFORMS, vol. 30(4), pages 646-661, November.
    15. Melega, Gislaine Mara & de Araujo, Silvio Alexandre & Jans, Raf, 2018. "Classification and literature review of integrated lot-sizing and cutting stock problems," European Journal of Operational Research, Elsevier, vol. 271(1), pages 1-19.
    16. Kaiyuan Liu & Hongyu Zhang & Chong Wang & Hui Li & Yongquan Chen & Qiong Chen, 2023. "Robust Optimization for the Two-Dimensional Strip-Packing Problem with Variable-Sized Bins," Mathematics, MDPI, vol. 11(23), pages 1-22, November.
    17. Furini, Fabio & Malaguti, Enrico & Medina Durán, Rosa & Persiani, Alfredo & Toth, Paolo, 2012. "A column generation heuristic for the two-dimensional two-staged guillotine cutting stock problem with multiple stock size," European Journal of Operational Research, Elsevier, vol. 218(1), pages 251-260.
    18. Kallrath, Julia & Rebennack, Steffen & Kallrath, Josef & Kusche, Rüdiger, 2014. "Solving real-world cutting stock-problems in the paper industry: Mathematical approaches, experience and challenges," European Journal of Operational Research, Elsevier, vol. 238(1), pages 374-389.
    19. Mhand Hifi & Toufik Saadi, 2012. "A parallel algorithm for two-staged two-dimensional fixed-orientation cutting problems," Computational Optimization and Applications, Springer, vol. 51(2), pages 783-807, March.
    20. Mhand Hifi & Rym M'Hallah & Toufik Saadi, 2008. "Algorithms for the Constrained Two-Staged Two-Dimensional Cutting Problem," INFORMS Journal on Computing, INFORMS, vol. 20(2), pages 212-221, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:ejores:v:205:y:2010:i:3:p:699-708. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/eor .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.