IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v88y2011i3p748-754.html
   My bibliography  Save this article

Transient simulation of household refrigerators: A semi-empirical quasi-steady approach

Author

Listed:
  • Borges, Bruno N.
  • Hermes, Christian J.L.
  • Gonçalves, Joaquim M.
  • Melo, Cláudio

Abstract

This paper outlines a simulation model for the cycling behavior of household refrigerators and, therefore, for predicting their energy consumption. The modeling methodology follows a quasi-steady approach, where the refrigeration system and also the refrigerated compartments are modeled following steady-state and transient approaches, respectively. The mass, energy and momentum conservation principles were used to put forward the equation set, whereas experimental data were collected and used to reduce the model closing parameters such as the thermal conductances and capacitances. The experiments were carried out using a controlled temperature and humidity environmental chamber. The model predictions were compared to experimental data, when it was found that the energy consumption is well predicted by the model with a maximum deviation of ±2%. A sensitivity analysis was also carried out to identify opportunities for energy savings.

Suggested Citation

  • Borges, Bruno N. & Hermes, Christian J.L. & Gonçalves, Joaquim M. & Melo, Cláudio, 2011. "Transient simulation of household refrigerators: A semi-empirical quasi-steady approach," Applied Energy, Elsevier, vol. 88(3), pages 748-754, March.
  • Handle: RePEc:eee:appene:v:88:y:2011:i:3:p:748-754
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(10)00384-3
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hermes, Christian J.L. & Melo, Cláudio & Knabben, Fernando T. & Gonçalves, Joaquim M., 2009. "Prediction of the energy consumption of household refrigerators and freezers via steady-state simulation," Applied Energy, Elsevier, vol. 86(7-8), pages 1311-1319, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Mastrullo, R. & Mauro, A.W. & Menna, L. & Palma, A. & Vanoli, G.P., 2014. "Transient model of a vertical freezer with door openings and defrost effects," Applied Energy, Elsevier, vol. 121(C), pages 38-50.
    2. Harrington, Lloyd & Aye, Lu & Fuller, Bob, 2018. "Impact of room temperature on energy consumption of household refrigerators: Lessons from analysis of field and laboratory data," Applied Energy, Elsevier, vol. 211(C), pages 346-357.
    3. Waltrich, Maicon & Hermes, Christian J.L. & Melo, Cláudio, 2011. "Simulation-based design and optimization of refrigeration cassettes," Applied Energy, Elsevier, vol. 88(12), pages 4756-4765.
    4. Negrão, Cezar O.R. & Hermes, Christian J.L., 2011. "Energy and cost savings in household refrigerating appliances: A simulation-based design approach," Applied Energy, Elsevier, vol. 88(9), pages 3051-3060.
    5. Qureshi, Bilal A. & Inam, Muhammad & Antar, Mohamed A. & Zubair, Syed M., 2013. "Experimental energetic analysis of a vapor compression refrigeration system with dedicated mechanical sub-cooling," Applied Energy, Elsevier, vol. 102(C), pages 1035-1041.
    6. Wu, H. & Tassou, S.A. & Karayiannis, T.G., 2013. "Modelling and control approaches for energy reduction in continuous frying systems," Applied Energy, Elsevier, vol. 112(C), pages 939-948.
    7. Borges, Bruno N. & Melo, Cláudio & Hermes, Christian J.L., 2015. "Transient simulation of a two-door frost-free refrigerator subjected to periodic door opening and evaporator frosting," Applied Energy, Elsevier, vol. 147(C), pages 386-395.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Qureshi, Bilal A. & Inam, Muhammad & Antar, Mohamed A. & Zubair, Syed M., 2013. "Experimental energetic analysis of a vapor compression refrigeration system with dedicated mechanical sub-cooling," Applied Energy, Elsevier, vol. 102(C), pages 1035-1041.
    2. Maximilian Lösch & Markus Fallmann & Agnes Poks & Martin Kozek, 2023. "Simulation-Based Sizing of a Secondary Loop Cooling System for a Refrigerated Vehicle," Energies, MDPI, vol. 16(18), pages 1-23, September.
    3. Farzamkia, Saleh & Ranjbar, Hossein & Hatami, Alireza & Iman-Eini, Hossein, 2016. "A novel PSO (Particle Swarm Optimization)-based approach for optimal schedule of refrigerators using experimental models," Energy, Elsevier, vol. 107(C), pages 707-715.
    4. Zehir, Mustafa Alparslan & Batman, Alp & Bagriyanik, Mustafa, 2016. "Review and comparison of demand response options for more effective use of renewable energy at consumer level," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 631-642.
    5. Harrington, Lloyd & Aye, Lu & Fuller, Bob, 2018. "Impact of room temperature on energy consumption of household refrigerators: Lessons from analysis of field and laboratory data," Applied Energy, Elsevier, vol. 211(C), pages 346-357.
    6. Martin Almenta, M. & Morrow, D.J. & Best, R.J. & Fox, B. & Foley, A.M., 2016. "Domestic fridge-freezer load aggregation to support ancillary services," Renewable Energy, Elsevier, vol. 87(P2), pages 954-964.
    7. Borges, Bruno N. & Melo, Cláudio & Hermes, Christian J.L., 2015. "Transient simulation of a two-door frost-free refrigerator subjected to periodic door opening and evaporator frosting," Applied Energy, Elsevier, vol. 147(C), pages 386-395.
    8. Hueppe, Christian & Geppert, Jasmin & Moenninghoff-Juessen, Julia & Wolff, Lena & Stamminger, Rainer & Paul, Andreas & Elsner, Andreas & Vrabec, Jadran & Wagner, Hendrik & Hoelscher, Heike & Becker, W, 2021. "Investigating the real life energy consumption of refrigeration appliances in Germany: Are present policies sufficient?," Energy Policy, Elsevier, vol. 155(C).
    9. Chen, Jiayu & Jain, Rishee K. & Taylor, John E., 2013. "Block Configuration Modeling: A novel simulation model to emulate building occupant peer networks and their impact on building energy consumption," Applied Energy, Elsevier, vol. 105(C), pages 358-368.
    10. Belman-Flores, J.M. & Barroso-Maldonado, J.M. & Rodríguez-Muñoz, A.P. & Camacho-Vázquez, G., 2015. "Enhancements in domestic refrigeration, approaching a sustainable refrigerator – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 955-968.
    11. Liu, Guoqiang & Yan, Gang & Yu, Jianlin, 2021. "A review of refrigerator gasket: Development trend, heat and mass transfer characteristics, structure and material optimization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 144(C).
    12. Mastrullo, R. & Mauro, A.W. & Menna, L. & Palma, A. & Vanoli, G.P., 2014. "Transient model of a vertical freezer with door openings and defrost effects," Applied Energy, Elsevier, vol. 121(C), pages 38-50.
    13. Waltrich, Maicon & Hermes, Christian J.L. & Melo, Cláudio, 2011. "Simulation-based design and optimization of refrigeration cassettes," Applied Energy, Elsevier, vol. 88(12), pages 4756-4765.
    14. Marcinichen, Jackson Braz & Olivier, Jonathan A. & Oliveira, Vinicius de & Thome, John R., 2012. "A review of on-chip micro-evaporation: Experimental evaluation of liquid pumping and vapor compression driven cooling systems and control," Applied Energy, Elsevier, vol. 92(C), pages 147-161.
    15. Negrão, Cezar O.R. & Hermes, Christian J.L., 2011. "Energy and cost savings in household refrigerating appliances: A simulation-based design approach," Applied Energy, Elsevier, vol. 88(9), pages 3051-3060.
    16. Daniel Hoehn & María Margallo & Jara Laso & Ana Fernández-Ríos & Israel Ruiz-Salmón & Rubén Aldaco, 2022. "Energy Systems in the Food Supply Chain and in the Food Loss and Waste Valorization Processes: A Systematic Review," Energies, MDPI, vol. 15(6), pages 1-15, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:88:y:2011:i:3:p:748-754. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.