IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v79y2004i1p27-40.html
   My bibliography  Save this article

Finite-time heat-transfer analysis and generalized power-optimization of an endoreversible Rankine heat-engine

Author

Listed:
  • Khaliq, Abdul

Abstract

This paper reports the results of a study carried out for the power optimization of a Rankine-cycle heat-engine using finite-time thermodynamic theory. This study extends the recent flurry of publications in heat-engine efficiency under the maximum power condition by incorporating the optima of heat conductance and heat capacitance ratios. While maximizing the instantaneous power output, it is shown that there is an optimum balance between the sizes of heat exchangers, between the heat capacity rates of heating and cooling fluid as well as temperature differences between the engine and thermal reservoirs. The results indicate that power output increases significantly with the increase in heat capacity rate of the heating fluid, but the thermal efficiency at maximum power remains constant. The effects of thermal conductance of the hot-side heat-exchanger on the power output and thermal efficiency are insignificant. The theoretical efficiency formulated in this study is much closer to that actually observed in well-designed power plants.

Suggested Citation

  • Khaliq, Abdul, 2004. "Finite-time heat-transfer analysis and generalized power-optimization of an endoreversible Rankine heat-engine," Applied Energy, Elsevier, vol. 79(1), pages 27-40, September.
    • Handle: RePEc:eee:appene:v:79:y:2004:i:1:p:27-40
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(03)00228-9
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wu, Chih, 1988. "Power optimization of a finite-time Carnot heat engine," Energy, Elsevier, vol. 13(9), pages 681-687.
    2. Blank, David A. & Davis, Gregory W. & Wu, Chih, 1994. "Power optimization of an endoreversible stirling cycle with regeneration," Energy, Elsevier, vol. 19(1), pages 125-133.
    3. Lee, Won Y. & Kim, Sang S. & Won, Seung H., 1990. "Finite-time optimizations of a heat engine," Energy, Elsevier, vol. 15(11), pages 979-985.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sogut, Oguz Salim & Durmayaz, Ahmet, 2005. "Performance optimization of a solar driven heat engine with finite-rate heat transfer," Renewable Energy, Elsevier, vol. 30(9), pages 1329-1344.
    2. Khaliq, Abdul & Kumar, Rajesh, 2005. "Finite-time heat-transfer analysis and ecological optimization of an endoreversible and regenerative gas-turbine power-cycle," Applied Energy, Elsevier, vol. 81(1), pages 73-84, May.
    3. Sahin, Bahri & Ust, Yasin & Yilmaz, Tamer & Akcay, Ismail Hakki, 2006. "Thermoeconomic analysis of a solar driven heat engine," Renewable Energy, Elsevier, vol. 31(7), pages 1033-1042.
    4. Wu, Lanmei & Lin, Guoxing & Chen, Jincan, 2010. "Parametric optimization of a solar-driven Braysson heat engine with variable heat capacity of the working fluid and radiation–convection heat losses," Renewable Energy, Elsevier, vol. 35(1), pages 95-100.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Khaliq, Abdul & Kumar, Rajesh, 2005. "Finite-time heat-transfer analysis and ecological optimization of an endoreversible and regenerative gas-turbine power-cycle," Applied Energy, Elsevier, vol. 81(1), pages 73-84, May.
    2. Erbay, L. Berrin & Yavuz, Hasbi, 1999. "Analysis of an irreversible Ericsson engine with a realistic regenerator," Applied Energy, Elsevier, vol. 62(3), pages 155-167, March.
    3. Kaushik, S.C & Kumar, S, 2000. "Finite time thermodynamic analysis of endoreversible Stirling heat engine with regenerative losses," Energy, Elsevier, vol. 25(10), pages 989-1003.
    4. Ahmadi, Mohammad H. & Ahmadi, Mohammad Ali & Pourfayaz, Fathollah & Hosseinzade, Hadi & Acıkkalp, Emin & Tlili, Iskander & Feidt, Michel, 2016. "Designing a powered combined Otto and Stirling cycle power plant through multi-objective optimization approach," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 585-595.
    5. Park, Hansaem & Kim, Min Soo, 2016. "Performance analysis of sequential Carnot cycles with finite heat sources and heat sinks and its application in organic Rankine cycles," Energy, Elsevier, vol. 99(C), pages 1-9.
    6. Lee, Won-Yong & Kim, Minjin & Sohn, Young-Jun & Kim, Seung-Gon, 2016. "Power optimization of a combined power system consisting of a high-temperature polymer electrolyte fuel cell and an organic Rankine cycle system," Energy, Elsevier, vol. 113(C), pages 1062-1070.
    7. Xu, Haoran & Chen, Lingen & Ge, Yanlin & Feng, Huijun, 2022. "Multi-objective optimization of Stirling heat engine with various heat and mechanical losses," Energy, Elsevier, vol. 256(C).
    8. Zhao, Qin & Zhang, Houcheng & Hu, Ziyang & Li, Yangyang, 2021. "An alkaline fuel cell/direct contact membrane distillation hybrid system for cogenerating electricity and freshwater," Energy, Elsevier, vol. 225(C).
    9. Lee, Won-Yong & Kim, Minjin & Sohn, Young-Jun & Kim, Seung-Gon, 2017. "Performance of a hybrid system consisting of a high-temperature polymer electrolyte fuel cell and an absorption refrigerator," Energy, Elsevier, vol. 141(C), pages 2397-2407.
    10. Patel, Vivek & Savsani, Vimal, 2016. "Multi-objective optimization of a Stirling heat engine using TS-TLBO (tutorial training and self learning inspired teaching-learning based optimization) algorithm," Energy, Elsevier, vol. 95(C), pages 528-541.
    11. Guo, Xinru & Zhang, Houcheng & Hu, Ziyang & Hou, Shujin & Ni, Meng & Liao, Tianjun, 2021. "Energetic, exergetic and ecological evaluations of a hybrid system based on a phosphoric acid fuel cell and an organic Rankine cycle," Energy, Elsevier, vol. 217(C).
    12. Ahmadi, Mohammad H. & Ahmadi, Mohammad-Ali & Pourfayaz, Fathollah, 2017. "Thermal models for analysis of performance of Stirling engine: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 68(P1), pages 168-184.
    13. Khu, Kerwin & Jiang, Liudi & Markvart, Tom, 2011. "Effect of finite heat input on the power performance of micro heat engines," Energy, Elsevier, vol. 36(5), pages 2686-2692.
    14. Ahmadi, Mohammad H. & Hosseinzade, Hadi & Sayyaadi, Hoseyn & Mohammadi, Amir H. & Kimiaghalam, Farshad, 2013. "Application of the multi-objective optimization method for designing a powered Stirling heat engine: Design with maximized power, thermal efficiency and minimized pressure loss," Renewable Energy, Elsevier, vol. 60(C), pages 313-322.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:79:y:2004:i:1:p:27-40. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.