IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v351y2023ics0306261923011935.html
   My bibliography  Save this article

Experimental and theoretical-based study of heavy metal capture by modified silica-alumina-based materials during thermal conversion of coal at high temperature combustion

Author

Listed:
  • Yang, Yuxuan
  • Zhong, Zhaoping
  • Li, Jiefei
  • Du, Haoran
  • Li, Qian
  • Zheng, Xiang
  • Qi, Renzhi
  • Zhang, Shan
  • Ren, Pengkun
  • Li, Zhaoying

Abstract

Heavy metals emitted from coal combustion can easily pose many threats. In this study, five modified additives based on kaolin were prepared for reducing the emission of heavy metals from high temperature coal combustion and characterized by XRD, FT-IR, XRF, BET, SEM and zeta potential. The heavy metal retention characteristics of the additives under high temperature (900–1300 °C) coal combustion were investigated by static and dynamic experiments, and the results showed that pseudo-boehmite-metakaolin (BMK) was the most effective additive, and the ability of heavy metal capture was Cr > Zn > Pb > Cd, and the dynamic experiments were better than the static experiments. The quantum chemical models of heavy metals (monomers, oxides and chlorides), kaolin and adsorbent-active substances were developed and optimized, and the adsorption energy was calculated. The morphological changes of the active substances were taken into account in the simulation, and new mathematical models for adsorption energy calculation were proposed, which effectively solved the extreme results of adsorption energy calculation and made a comprehensive evaluation of heavy metal adsorption for the whole studied temperature range system. The mechanism of heavy metal adsorption on the active substance was further investigated by the simulations. Heavy metal atoms can form covalent or ionic bonds with O atoms of the active substance, Cl atoms of heavy metal chlorides can be covalently bonded or non-bonded with Al atoms of the active substance, and O atoms of heavy metal oxides can combine with Al atoms of the active substance to form ionic bonds. This study sheds new light on the control of heavy metals in high-temperature coal combustion, the methods for the optimization of simulation and the adsorption mechanism of heavy metals on relevant reactive substances. The method has a promising potential for large-scale application due to its simple preparation, low cost and significant effect.

Suggested Citation

  • Yang, Yuxuan & Zhong, Zhaoping & Li, Jiefei & Du, Haoran & Li, Qian & Zheng, Xiang & Qi, Renzhi & Zhang, Shan & Ren, Pengkun & Li, Zhaoying, 2023. "Experimental and theoretical-based study of heavy metal capture by modified silica-alumina-based materials during thermal conversion of coal at high temperature combustion," Applied Energy, Elsevier, vol. 351(C).
    • Handle: RePEc:eee:appene:v:351:y:2023:i:c:s0306261923011935
    DOI: 10.1016/j.apenergy.2023.121829
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261923011935
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2023.121829?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Oboirien, B.O. & Thulari, V. & North, B.C., 2016. "Enrichment of trace elements in bottom ash from coal oxy-combustion: Effect of coal types," Applied Energy, Elsevier, vol. 177(C), pages 81-86.
    2. Marta Marczak-Grzesik & Piotr Piersa & Mateusz Karczewski & Szymon Szufa & Hilal Ünyay & Aleksandra Kędzierska-Sar & Piotr Bochenek, 2021. "Modified Fly Ash-Based Adsorbents (MFA) for Mercury and Carbon Dioxide Removal from Coal-Fired Flue Gases," Energies, MDPI, vol. 14(21), pages 1-13, October.
    3. Wang, Chang’an & Zhang, Xiaoming & Liu, Yinhe & Che, Defu, 2012. "Pyrolysis and combustion characteristics of coals in oxyfuel combustion," Applied Energy, Elsevier, vol. 97(C), pages 264-273.
    4. Zeng, Guang & Xu, Mingchen & Tu, Yaojie & Li, Zhenwei & Cai, Yongtie & Zheng, Zhimin & Tay, Kunlin & Yang, Wenming, 2020. "Influences of initial coal concentration on ignition behaviors of low-NOx bias combustion technology," Applied Energy, Elsevier, vol. 278(C).
    5. Konsomboon, Supatchaya & Pipatmanomai, Suneerat & Madhiyanon, Thanid & Tia, Suvit, 2011. "Effect of kaolin addition on ash characteristics of palm empty fruit bunch (EFB) upon combustion," Applied Energy, Elsevier, vol. 88(1), pages 298-305, January.
    6. Chen, Guifang & Yang, Xinfei & Chen, Shouyan & Dong, Yong & Cui, Lin & Zhang, Yong & Wang, Peng & Zhao, Xiqiang & Ma, Chunyuan, 2017. "Transformation of heavy metals in lignite during supercritical water gasification," Applied Energy, Elsevier, vol. 187(C), pages 272-280.
    7. Ayotamuno, M.J. & Okparanma, R.N. & Ogaji, S.O.T. & Probert, S.D., 2007. "Chromium removal from flocculation effluent of liquid-phase oil-based drill-cuttings using powdered activated carbon," Applied Energy, Elsevier, vol. 84(10), pages 1002-1011, October.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Yao, Xiwen & Zheng, Yan & Zhou, Haodong & Xu, Kaili & Xu, Qingwei & Li, Li, 2020. "Effects of biomass blending, ashing temperature and potassium addition on ash sintering behaviour during co-firing of pine sawdust with a Chinese anthracite," Renewable Energy, Elsevier, vol. 147(P1), pages 2309-2320.
    2. Pablo J. Arauzo & María Atienza-Martínez & Javier Ábrego & Maciej P. Olszewski & Zebin Cao & Andrea Kruse, 2020. "Combustion Characteristics of Hydrochar and Pyrochar Derived from Digested Sewage Sludge," Energies, MDPI, vol. 13(16), pages 1-15, August.
    3. Bu, Changsheng & Gómez-Barea, Alberto & Chen, Xiaoping & Leckner, Bo & Liu, Daoyin & Pallarès, David & Lu, Ping, 2016. "Effect of CO2 on oxy-fuel combustion of coal-char particles in a fluidized bed: Modeling and comparison with the conventional mode of combustion," Applied Energy, Elsevier, vol. 177(C), pages 247-259.
    4. Wang, Liang & Skreiberg, Øyvind & Becidan, Michael & Li, Hailong, 2016. "Investigation of rye straw ash sintering characteristics and the effect of additives," Applied Energy, Elsevier, vol. 162(C), pages 1195-1204.
    5. Kartal, Furkan & Dalbudak, Yağmur & Özveren, Uğur, 2023. "Prediction of thermal degradation of biopolymers in biomass under pyrolysis atmosphere by means of machine learning," Renewable Energy, Elsevier, vol. 204(C), pages 774-787.
    6. Wang, Chang'an & Wu, Song & Lv, Qiang & Liu, Xuan & Chen, Wufeng & Che, Defu, 2017. "Study on correlations of coal chemical properties based on database of real-time data," Applied Energy, Elsevier, vol. 204(C), pages 1115-1123.
    7. Lin, Junhao & Sun, Shichang & Cui, Chongwei & Ma, Rui & Fang, Lin & Zhang, Peixin & Quan, Zonggang & Song, Xin & Yan, Jianglong & Luo, Juan, 2019. "Hydrogen-rich bio-gas generation and optimization in relation to heavy metals immobilization during Pd-catalyzed supercritical water gasification of sludge," Energy, Elsevier, vol. 189(C).
    8. Chen, Jianbiao & Gao, Shuaifei & Xu, Fang & Xu, Wenhao & Yang, Yuanjiang & Kong, Depeng & Wang, Yinfeng & Yao, Huicong & Chen, Haijun & Zhu, Yuezhao & Mu, Lin, 2022. "Influence of moisture and feedstock form on the pyrolysis behaviors, pyrolytic gas production, and residues micro-structure evolutions of an industrial sludge from a steel production enterprise," Energy, Elsevier, vol. 248(C).
    9. Lupiáñez, Carlos & Carmen Mayoral, M. & Díez, Luis I. & Pueyo, Eloy & Espatolero, Sergio & Manuel Andrés, J., 2016. "The role of limestone during fluidized bed oxy-combustion of coal and biomass," Applied Energy, Elsevier, vol. 184(C), pages 670-680.
    10. Chi, Chung-Cheng & Lin, Ta-Hui, 2013. "Oxy-oil combustion characteristics of an existing furnace," Applied Energy, Elsevier, vol. 102(C), pages 923-930.
    11. Xu, Hao & Cheng, Shuo & Hungwe, Douglas & Yoshikawa, Kunio & Takahashi, Fumitake, 2022. "Co-pyrolysis coupled with torrefaction enhances hydrocarbons production from rice straw and oil sludge: The effect of torrefaction on co-pyrolysis synergistic behaviors," Applied Energy, Elsevier, vol. 327(C).
    12. Gil, María V. & Riaza, Juan & Álvarez, Lucía & Pevida, Covadonga & Rubiera, Fernando, 2015. "Biomass devolatilization at high temperature under N2 and CO2: Char morphology and reactivity," Energy, Elsevier, vol. 91(C), pages 655-662.
    13. Chen, Zhewen & Zhang, Xiaosong & Han, Wei & Gao, Lin & Li, Sheng, 2018. "A power generation system with integrated supercritical water gasification of coal and CO2 capture," Energy, Elsevier, vol. 142(C), pages 723-730.
    14. Chen, Zhichao & Qiao, Yanyu & Guan, Shuo & Wang, Zhenwang & Zheng, Yu & Zeng, Lingyan & Li, Zhengqi, 2022. "Effect of inner and outer secondary air ratios on ignition, C and N conversion process of pulverized coal in swirl burner under sub-stoichiometric ratio," Energy, Elsevier, vol. 239(PD).
    15. Si, Junping & Liu, Xiaowei & Xu, Minghou & Sheng, Lei & Zhou, Zijian & Wang, Chao & Zhang, Yang & Seo, Yong-Chil, 2014. "Effect of kaolin additive on PM2.5 reduction during pulverized coal combustion: Importance of sodium and its occurrence in coal," Applied Energy, Elsevier, vol. 114(C), pages 434-444.
    16. Joanna Wnorowska & Szymon Ciukaj & Sylwester Kalisz, 2021. "Thermogravimetric Analysis of Solid Biofuels with Additive under Air Atmosphere," Energies, MDPI, vol. 14(8), pages 1-19, April.
    17. Xu, Mingxin & Li, Shiyuan & Wu, Yinghai & Jia, Lufei & Lu, Qinggang, 2017. "The characteristics of recycled NO reduction over char during oxy-fuel fluidized bed combustion," Applied Energy, Elsevier, vol. 190(C), pages 553-562.
    18. Zeng, Guang & Zhou, Anqi & Fu, Jinming & Ji, Yang, 2022. "Experimental and numerical investigations on NOx formation and reduction mechanisms of pulverized-coal stereo-staged combustion," Energy, Elsevier, vol. 261(PB).
    19. de Paula Protásio, Thiago & Roque Lima, Michael Douglas & Scatolino, Mário Vanoli & Silva, Alanna Barishinikov & Rodrigues de Figueiredo, Izabel Cristina & Gherardi Hein, Paulo Ricardo & Trugilho, Pau, 2021. "Charcoal productivity and quality parameters for reliable classification of Eucalyptus clones from Brazilian energy forests," Renewable Energy, Elsevier, vol. 164(C), pages 34-45.
    20. Xuan Liu & Yang Teng & Kai Zhang, 2022. "Migration Behaviors of As, Se and Pb in Ultra-Low-Emission Coal-Fired Units and Effect of Co-Firing Sewage Sludge in CFB Boilers," Energies, MDPI, vol. 15(4), pages 1-19, February.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:351:y:2023:i:c:s0306261923011935. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.