IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v262y2020ics0306261920300660.html
   My bibliography  Save this article

Heat-transfer enhancement for corn straw slurry from biogas plants by twisted hexagonal tubes

Author

Listed:
  • Chen, Jingjing
  • Hai, Zhong
  • Lu, Xiaohua
  • Wang, Changsong
  • Ji, Xiaoyan

Abstract

Heat-transfer geometries that enhance heat transfer performance for slurries increase the net raw biogas production in the bio-methane process. In this study, the precise temperature-dependent rheologies of corn straw slurry with 6 and 8% total solid were determined, collected, and modeled to conduct a numerical simulation via CFD, the first instance of such research. Subsequently, the reliability of the numerical results was verified with heat-transfer experiments. The heat-transfer performances of the circular, twisted square and twisted hexagonal tubes were estimated numerically, ultimately showing that the twisted hexagonal tube performed optimally with an enhancement factor of up to 2.0 in the turbulent region, compared to the circular tube. Based on the numerical results, the mechanism of heat-transfer enhancement was revealed, showing balanced radial mixing and the near-wall shear effect that leads to a strong and continuous shear rate under a considerable radial-flow intensity. An engineering equation was obtained for the performance evaluation, and the waste-heat recovery from corn straw slurry was analyzed, showing the twisted hexagonal tube can increase the net raw biogas production by up to 17.0% compared to the circular tube.

Suggested Citation

  • Chen, Jingjing & Hai, Zhong & Lu, Xiaohua & Wang, Changsong & Ji, Xiaoyan, 2020. "Heat-transfer enhancement for corn straw slurry from biogas plants by twisted hexagonal tubes," Applied Energy, Elsevier, vol. 262(C).
    • Handle: RePEc:eee:appene:v:262:y:2020:i:c:s0306261920300660
    DOI: 10.1016/j.apenergy.2020.114554
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261920300660
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2020.114554?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Thorin, Eva & Lindmark, Johan & Nordlander, Eva & Odlare, Monica & Dahlquist, Erik & Kastensson, Jan & Leksell, Niklas & Pettersson, Carl-Magnus, 2012. "Performance optimization of the Växtkraft biogas production plant," Applied Energy, Elsevier, vol. 97(C), pages 503-508.
    2. Chen, Jingjing & Wu, Jiajun & Ji, Xiaoyan & Lu, Xiaohua & Wang, Changsong, 2017. "Mechanism of waste-heat recovery from slurry by scraped-surface heat exchanger," Applied Energy, Elsevier, vol. 207(C), pages 146-155.
    3. Arsenyeva, O. & Kapustenko, P. & Tovazhnyanskyy, L. & Khavin, G., 2013. "The influence of plate corrugations geometry on plate heat exchanger performance in specified process conditions," Energy, Elsevier, vol. 57(C), pages 201-207.
    4. Ma, Hongting & Du, Na & Zhang, Zeyu & Lyu, Fan & Deng, Na & Li, Cong & Yu, Shaojie, 2017. "Assessment of the optimum operation conditions on a heat pipe heat exchanger for waste heat recovery in steel industry," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 50-60.
    5. Zupančič, G.D. & Roš, M., 2003. "Heat and energy requirements in thermophilic anaerobic sludge digestion," Renewable Energy, Elsevier, vol. 28(14), pages 2255-2267.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Abdelkader Mahammedi & Naas Toufik Tayeb & Kouider Rahmani & Awf Al-Kassir & Eduardo Manuel Cuerda-Correa, 2023. "Exploring the Bioenergy Potential of Microfluidics: The Case of a T-Micromixer with Helical Elements for Sustainable Energy Solutions," Energies, MDPI, vol. 16(20), pages 1-18, October.
    2. Wei Wang & Mengke Niu & Yufei Tan & Bingxi Li & Yong Shuai, 2022. "Investigation on Flow Maldistribution and Thermo-Hydraulic Performance of PCHEs with Spoiler Perforated Boards," Energies, MDPI, vol. 15(18), pages 1-15, September.
    3. Chen, Jingjing & Risberg, Mikael & Westerlund, Lars & Jansson, Urban & Lu, Xiaohua & Wang, Changsong & Ji, Xiaoyan, 2020. "A high efficient heat exchanger with twisted geometries for biogas process with manure slurry," Applied Energy, Elsevier, vol. 279(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ershad Ullah Khan & Åke Nordberg & Peter Malmros, 2022. "Waste Heat Driven Integrated Membrane Distillation for Concentrating Nutrients and Process Water Recovery at a Thermophilic Biogas Plant," Sustainability, MDPI, vol. 14(20), pages 1-21, October.
    2. Chen, Jingjing & Risberg, Mikael & Westerlund, Lars & Jansson, Urban & Lu, Xiaohua & Wang, Changsong & Ji, Xiaoyan, 2020. "A high efficient heat exchanger with twisted geometries for biogas process with manure slurry," Applied Energy, Elsevier, vol. 279(C).
    3. Khan, Ershad Ullah & Nordberg, Åke, 2019. "Thermal integration of membrane distillation in an anaerobic digestion biogas plant – A techno-economic assessment," Applied Energy, Elsevier, vol. 239(C), pages 1163-1174.
    4. Yang, Xiaohu & Yu, Jiabang & Guo, Zengxu & Jin, Liwen & He, Ya-Ling, 2019. "Role of porous metal foam on the heat transfer enhancement for a thermal energy storage tube," Applied Energy, Elsevier, vol. 239(C), pages 142-156.
    5. Omar, M.N. & Samak, A.A. & Keshek, M.H. & Elsisi, S.F., 2020. "Simulation and validation model for using the energy produced from broiler litter waste in their house and its requirement of energy," Renewable Energy, Elsevier, vol. 159(C), pages 920-928.
    6. Olga Arsenyeva & Leonid Tovazhnyanskyy & Petro Kapustenko & Jiří Jaromír Klemeš & Petar Sabev Varbanov, 2023. "Review of Developments in Plate Heat Exchanger Heat Transfer Enhancement for Single-Phase Applications in Process Industries," Energies, MDPI, vol. 16(13), pages 1-28, June.
    7. Arsenyeva, Olga & Klemeš, Jiří Jaromír & Kapustenko, Petro & Fedorenko, Olena & Kusakov, Sergiy & Kobylnik, Dmytro, 2021. "Plate heat exchanger design for the utilisation of waste heat from exhaust gases of drying process," Energy, Elsevier, vol. 233(C).
    8. Ariunbaatar, Javkhlan & Panico, Antonio & Esposito, Giovanni & Pirozzi, Francesco & Lens, Piet N.L., 2014. "Pretreatment methods to enhance anaerobic digestion of organic solid waste," Applied Energy, Elsevier, vol. 123(C), pages 143-156.
    9. Mohammed S. M. Al-Azzawi & Daphne Gondhalekar & Jörg E. Drewes, 2022. "Neighborhood-Scale Urban Water Reclamation with Integrated Resource Recovery for Establishing Nexus City in Munich, Germany: Pipe Dream or Reality?," Resources, MDPI, vol. 11(7), pages 1-17, July.
    10. Ghasimi, Dara S.M. & de Kreuk, Merle & Maeng, Sung Kyu & Zandvoort, Marcel H. & van Lier, Jules B., 2016. "High-rate thermophilic bio-methanation of the fine sieved fraction from Dutch municipal raw sewage: Cost-effective potentials for on-site energy recovery," Applied Energy, Elsevier, vol. 165(C), pages 569-582.
    11. Jalal Faraj & Khaled Chahine & Mostafa Mortada & Thierry Lemenand & Haitham S. Ramadan & Mahmoud Khaled, 2022. "Eco-Efficient Vehicle Cooling Modules with Integrated Diffusers—Thermal, Energy, and Environmental Analyses," Energies, MDPI, vol. 15(21), pages 1-19, October.
    12. Chinese, D. & Patrizio, P. & Nardin, G., 2014. "Effects of changes in Italian bioenergy promotion schemes for agricultural biogas projects: Insights from a regional optimization model," Energy Policy, Elsevier, vol. 75(C), pages 189-205.
    13. Llera, Rocio & Vigil, Miguel & Díaz-Díaz, Sara & Martínez Huerta, Gemma Marta, 2022. "Prospective environmental and techno-economic assessment of steam production by means of heat pipes in the steel industry," Energy, Elsevier, vol. 239(PD).
    14. Mattia Cottes & Matia Mainardis & Daniele Goi & Patrizia Simeoni, 2020. "Demand-Response Application in Wastewater Treatment Plants Using Compressed Air Storage System: A Modelling Approach," Energies, MDPI, vol. 13(18), pages 1-15, September.
    15. Ihsan Hamawand & Craig Baillie, 2015. "Anaerobic Digestion and Biogas Potential: Simulation of Lab and Industrial-Scale Processes," Energies, MDPI, vol. 8(1), pages 1-21, January.
    16. Cavinato, Cristina & Bolzonella, David & Pavan, Paolo & Fatone, Francesco & Cecchi, Franco, 2013. "Mesophilic and thermophilic anaerobic co-digestion of waste activated sludge and source sorted biowaste in pilot- and full-scale reactors," Renewable Energy, Elsevier, vol. 55(C), pages 260-265.
    17. Delpech, Bertrand & Axcell, Brian & Jouhara, Hussam, 2019. "Experimental investigation of a radiative heat pipe for waste heat recovery in a ceramics kiln," Energy, Elsevier, vol. 170(C), pages 636-651.
    18. Djatkov, Djordje & Effenberger, Mathias & Martinov, Milan, 2014. "Method for assessing and improving the efficiency of agricultural biogas plants based on fuzzy logic and expert systems," Applied Energy, Elsevier, vol. 134(C), pages 163-175.
    19. Kasinath, Archana & Byliński, Hubert & Artichowicz, Wojciech & Remiszewska –Skwarek, Anna & Szopińska, Małgorzata & Zaborowska, Ewa & Luczkiewicz, Aneta & Fudala –Ksiazek, Sylwia, 2023. "Biochemical assays of intensified methane content in biogas from low-temperature processing of waste activated sludge," Energy, Elsevier, vol. 282(C).
    20. Leonid Tovazhnyanskyy & Jiří Jaromir Klemeš & Petro Kapustenko & Olga Arsenyeva & Olexandr Perevertaylenko & Pavlo Arsenyev, 2020. "Optimal Design of Welded Plate Heat Exchanger for Ammonia Synthesis Column: An Experimental Study with Mathematical Optimisation," Energies, MDPI, vol. 13(11), pages 1-18, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:262:y:2020:i:c:s0306261920300660. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.