IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v157y2015icp814-823.html
   My bibliography  Save this article

Application of a multi-zone combustion model to investigate the NOx reduction potential of two-stroke marine diesel engines using EGR

Author

Listed:
  • Raptotasios, Spiridon I.
  • Sakellaridis, Nikolaos F.
  • Papagiannakis, Roussos G.
  • Hountalas, Dimitrios T.

Abstract

The most promising solution for propulsion of marine vessels currently and for the near future is the two-stroke low-speed diesel engines. Despite its advantages, as far as specific fuel oil consumption, power density and reliability is concerned, it suffers from increased NOx emissions mainly because of its low rotational speed. But the upcoming NOx emission legislation (Tier III) in the marine sector requires considerable reduction of NOx emissions towards levels which have not yet been commercially achieved using primary methods. This creates new challenges for the development and application of innovative techniques that could reduce engine’s NOx emissions with the lowest possible fuel penalty. This is important considering current and future fuel prices. The large size of the 2-stroke marine engine makes the use of experimental techniques, to investigate this potential, expensive and time consuming. Modelling can significantly contribute towards this effort and result to reduction of research and development cost. Among the most effective in-cylinder techniques for NOx reduction is EGR, a proven technology for smaller engines used in the transport sector. In the present study, it is investigated via modelling, the potential to reduce NOx emissions of two-stroke marine engines using EGR. Despite the technological difficulties resulting mainly from the use of Heavy Fuel Oil (HFO), which makes the application of conventional EGR techniques difficult, it is worthwhile investigating the NOx reduction potential, since significant progress has been achieved towards the development of new EGR gas cooling techniques and scrubber technologies for removal of sulphur species from the exhaust gas. The present investigation makes use of an existing well validated multi-zone combustion model, initially developed for high-speed DI diesel engines. The model has been successfully applied in the past, to investigate heavy duty diesel engine NOx reduction via EGR, providing favourable results. Currently it is modified and applied on a two-stroke marine diesel engine using EGR. Model evaluation is based on experimental data acquired from the international literature, due to lack of experimental data for 2-stroke engines. The analysis of derived results reveals model’s ability to predict both engine performance and NOx emissions but most important the ability to predict the overall effect of EGR on NOx emissions in a qualitatively correct way. The results also reveal the strong potential of EGR to control NOx emissions of 2-stroke engines with relatively low fuel penalty compared to alternative techniques.

Suggested Citation

  • Raptotasios, Spiridon I. & Sakellaridis, Nikolaos F. & Papagiannakis, Roussos G. & Hountalas, Dimitrios T., 2015. "Application of a multi-zone combustion model to investigate the NOx reduction potential of two-stroke marine diesel engines using EGR," Applied Energy, Elsevier, vol. 157(C), pages 814-823.
    • Handle: RePEc:eee:appene:v:157:y:2015:i:c:p:814-823
    DOI: 10.1016/j.apenergy.2014.12.041
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261914012987
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2014.12.041?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Aithal, S.M., 2010. "Modeling of NOx formation in diesel engines using finite-rate chemical kinetics," Applied Energy, Elsevier, vol. 87(7), pages 2256-2265, July.
    2. Roy, Sumit & Banerjee, Rahul & Bose, Probir Kumar, 2014. "Performance and exhaust emissions prediction of a CRDI assisted single cylinder diesel engine coupled with EGR using artificial neural network," Applied Energy, Elsevier, vol. 119(C), pages 330-340.
    3. Zamboni, Giorgio & Capobianco, Massimo, 2012. "Experimental study on the effects of HP and LP EGR in an automotive turbocharged diesel engine," Applied Energy, Elsevier, vol. 94(C), pages 117-128.
    4. Agarwal, Deepak & Singh, Shrawan Kumar & Agarwal, Avinash Kumar, 2011. "Effect of Exhaust Gas Recirculation (EGR) on performance, emissions, deposits and durability of a constant speed compression ignition engine," Applied Energy, Elsevier, vol. 88(8), pages 2900-2907, August.
    5. Liu, Haifeng & Li, Shanju & Zheng, Zunqing & Xu, Jia & Yao, Mingfa, 2013. "Effects of n-butanol, 2-butanol, and methyl octynoate addition to diesel fuel on combustion and emissions over a wide range of exhaust gas recirculation (EGR) rates," Applied Energy, Elsevier, vol. 112(C), pages 246-256.
    6. Roy, Murari Mohon & Parvez, Riaz & Sarker, Rabiul Islam, 2011. "Exhaust odor and smoke reduction of stationary DI diesel engines to acceptable level by water-scrubbing and air-dilution system," Applied Energy, Elsevier, vol. 88(7), pages 2391-2399, July.
    7. Millo, Federico & Giacominetto, Paolo Ferrero & Bernardi, Marco Gianoglio, 2012. "Analysis of different exhaust gas recirculation architectures for passenger car Diesel engines," Applied Energy, Elsevier, vol. 98(C), pages 79-91.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Dawei & Shi, Lei & Zhu, Sipeng & Liu, Bo & Qian, Yuehua & Deng, Kangyao, 2020. "Numerical and thermodynamic study on effects of high and low pressure exhaust gas recirculation on turbocharged marine low-speed engine," Applied Energy, Elsevier, vol. 261(C).
    2. Zamboni, Giorgio & Moggia, Simone & Capobianco, Massimo, 2016. "Hybrid EGR and turbocharging systems control for low NOX and fuel consumption in an automotive diesel engine," Applied Energy, Elsevier, vol. 165(C), pages 839-848.
    3. Tauzia, Xavier & Maiboom, Alain, 2013. "Experimental study of an automotive Diesel engine efficiency when running under stoichiometric conditions," Applied Energy, Elsevier, vol. 105(C), pages 116-124.
    4. Park, Youngsoo & Bae, Choongsik, 2014. "Experimental study on the effects of high/low pressure EGR proportion in a passenger car diesel engine," Applied Energy, Elsevier, vol. 133(C), pages 308-316.
    5. Zhu, Dengting & Zheng, Xinqian, 2019. "Fuel consumption and emission characteristics in asymmetric twin-scroll turbocharged diesel engine with two exhaust gas recirculation circuits," Applied Energy, Elsevier, vol. 238(C), pages 985-995.
    6. Andwari, Amin Mahmoudzadeh & Aziz, Azhar Abdul & Said, Mohd Farid Muhamad & Latiff, Zulkarnain Abdul, 2014. "Experimental investigation of the influence of internal and external EGR on the combustion characteristics of a controlled auto-ignition two-stroke cycle engine," Applied Energy, Elsevier, vol. 134(C), pages 1-10.
    7. Park, Jungsoo & Song, Soonho & Lee, Kyo Seung, 2015. "Numerical investigation of a dual-loop EGR split strategy using a split index and multi-objective Pareto optimization," Applied Energy, Elsevier, vol. 142(C), pages 21-32.
    8. Liu, Bolan & Zhang, Fujun & Zhao, Changlu & An, Xiaohui & Pei, Haijun, 2016. "A novel lambda-based EGR (exhaust gas recirculation) modulation method for a turbocharged diesel engine under transient operation," Energy, Elsevier, vol. 96(C), pages 521-530.
    9. Cornolti, L. & Onorati, A. & Cerri, T. & Montenegro, G. & Piscaglia, F., 2013. "1D simulation of a turbocharged Diesel engine with comparison of short and long EGR route solutions," Applied Energy, Elsevier, vol. 111(C), pages 1-15.
    10. Yin, Lianhao & Turesson, Gabriel & Tunestål, Per & Johansson, Rolf, 2019. "Evaluation and transient control of an advanced multi-cylinder engine based on partially premixed combustion," Applied Energy, Elsevier, vol. 233, pages 1015-1026.
    11. Asad, Usman & Zheng, Ming, 2014. "Exhaust gas recirculation for advanced diesel combustion cycles," Applied Energy, Elsevier, vol. 123(C), pages 242-252.
    12. Rahman, S.M. Ashrafur & Masjuki, H.H. & Kalam, M.A. & Sanjid, A. & Abedin, M.J., 2014. "Assessment of emission and performance of compression ignition engine with varying injection timing," Renewable and Sustainable Energy Reviews, Elsevier, vol. 35(C), pages 221-230.
    13. Huang, Haozhong & Wang, Qingxin & Shi, Cheng & Liu, Qingsheng & Zhou, Chengzhong, 2016. "Comparative study of effects of pilot injection and fuel properties on low temperature combustion in diesel engine under a medium EGR rate," Applied Energy, Elsevier, vol. 179(C), pages 1194-1208.
    14. Zeng, Xiangrui & Wang, Junmin, 2014. "A physics-based time-varying transport delay oxygen concentration model for dual-loop exhaust gas recirculation (EGR) engine air-paths," Applied Energy, Elsevier, vol. 125(C), pages 300-307.
    15. Abbaszadehmosayebi, G. & Ganippa, Lionel, 2014. "Determination of specific heat ratio and error analysis for engine heat release calculations," Applied Energy, Elsevier, vol. 122(C), pages 143-150.
    16. Szwaja, Stanislaw & Jamrozik, Arkadiusz & Tutak, Wojciech, 2013. "A two-stage combustion system for burning lean gasoline mixtures in a stationary spark ignited engine," Applied Energy, Elsevier, vol. 105(C), pages 271-281.
    17. Shen, Zhaojie & Liu, Zhongchang & Tian, Jing & Liu, Jiangwei, 2014. "Investigation of in-cylinder gas stratification of diesel engine during intake and compression stroke," Energy, Elsevier, vol. 72(C), pages 671-679.
    18. Molina, S. & García, A. & Pastor, J.M. & Belarte, E. & Balloul, I., 2015. "Operating range extension of RCCI combustion concept from low to full load in a heavy-duty engine," Applied Energy, Elsevier, vol. 143(C), pages 211-227.
    19. Zhu, Dengting & Zheng, Xinqian, 2017. "Asymmetric twin-scroll turbocharging in diesel engines for energy and emission improvement," Energy, Elsevier, vol. 141(C), pages 702-714.
    20. Giorgio Zamboni & Simone Moggia & Massimo Capobianco, 2017. "Effects of a Dual-Loop Exhaust Gas Recirculation System and Variable Nozzle Turbine Control on the Operating Parameters of an Automotive Diesel Engine," Energies, MDPI, vol. 10(1), pages 1-18, January.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:157:y:2015:i:c:p:814-823. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.