IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v130y2014icp830-837.html
   My bibliography  Save this article

Study on oscillating flow of moderate kinetic Reynolds numbers using complex velocity model and phase Doppler anemometer

Author

Listed:
  • Xiao, Gang
  • Zhou, Tianxue
  • Ni, Mingjiang
  • Chen, Conghui
  • Luo, Zhongyang
  • Cen, Kefa

Abstract

Oscillating flows have fundamental effects on the heat and mass transfer of Stirling engines and gas springs. A complex velocity model was proposed to describe the fully-developed laminar oscillating flow through introducing complex functions and simplified control equations. The maximum dimensionless velocity decreased and the smooth core area of velocity expanded as the kinetic Reynolds number increased, which led the Stokes layer became thinner. Experiments were carried out in an apparatus consisting of piston-cylinder space connected to a straight duct. Instantaneous velocities of oscillating flows for Reω value of 230, 900 and 1800 were measured by a phase Doppler anemometer (PDA), where the effects of responding time, accuracy and features of tracer particles were analyzed. The experiments indicated that the complex velocity model with Reω was suitable to describe the fully-developed laminar oscillating flow, and the average deviation was about 10%. For a moderate-value Reω, the ratios of maximum dimensionless velocity for r=0.85R to r=0R were 1.06–1.10, which were evidences of “annular effect”.

Suggested Citation

  • Xiao, Gang & Zhou, Tianxue & Ni, Mingjiang & Chen, Conghui & Luo, Zhongyang & Cen, Kefa, 2014. "Study on oscillating flow of moderate kinetic Reynolds numbers using complex velocity model and phase Doppler anemometer," Applied Energy, Elsevier, vol. 130(C), pages 830-837.
    • Handle: RePEc:eee:appene:v:130:y:2014:i:c:p:830-837
    DOI: 10.1016/j.apenergy.2014.02.005
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S030626191400124X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2014.02.005?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Cheng, Chin-Hsiang & Yang, Hang-Suin & Jhou, Bing-Yi & Chen, Yi-Cheng & Wang, Yu-Jen, 2013. "Dynamic simulation of thermal-lag Stirling engines," Applied Energy, Elsevier, vol. 108(C), pages 466-476.
    2. Rittidech, S. & Pipatpaiboon, N. & Terdtoon, P., 2007. "Heat-transfer characteristics of a closed-loop oscillating heat-pipe with check valves," Applied Energy, Elsevier, vol. 84(5), pages 565-577, May.
    3. Zeng, Lingyan & Li, Zhengqi & Zhao, Guangbo & Li, Jing & Zhang, Fucheng & Shen, Shanping & Chen, Lizhe, 2011. "The influence of swirl burner structure on the gas/particle flow characteristics," Energy, Elsevier, vol. 36(10), pages 6184-6194.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ni, Mingjiang & Shi, Bingwei & Xiao, Gang & Peng, Hao & Sultan, Umair & Wang, Shurong & Luo, Zhongyang & Cen, Kefa, 2016. "Improved Simple Analytical Model and experimental study of a 100W β-type Stirling engine," Applied Energy, Elsevier, vol. 169(C), pages 768-787.
    2. Luo, Zhongyang & Sultan, Umair & Ni, Mingjiang & Peng, Hao & Shi, Bingwei & Xiao, Gang, 2016. "Multi-objective optimization for GPU3 Stirling engine by combining multi-objective algorithms," Renewable Energy, Elsevier, vol. 94(C), pages 114-125.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hooshang, M. & Askari Moghadam, R. & AlizadehNia, S., 2016. "Dynamic response simulation and experiment for gamma-type Stirling engine," Renewable Energy, Elsevier, vol. 86(C), pages 192-205.
    2. Luo, Zhongyang & Sultan, Umair & Ni, Mingjiang & Peng, Hao & Shi, Bingwei & Xiao, Gang, 2016. "Multi-objective optimization for GPU3 Stirling engine by combining multi-objective algorithms," Renewable Energy, Elsevier, vol. 94(C), pages 114-125.
    3. Mojtaba Alborzi & Faramarz Sarhaddi & Fatemeh Sobhnamayan, 2019. "Optimization of the thermal lag Stirling engine performance," Energy & Environment, , vol. 30(1), pages 156-175, February.
    4. Zare, Shahryar & Tavakolpour-saleh, A.R. & Aghahosseini, A. & Sangdani, M.H. & Mirshekari, Reza, 2021. "Design and optimization of Stirling engines using soft computing methods: A review," Applied Energy, Elsevier, vol. 283(C).
    5. Sun, Haojie & Yu, Guoyao & Zhao, Dan & Dai, Wei & Luo, Ercang, 2023. "Thermoacoustic hysteresis of a free-piston Stirling electric generator," Energy, Elsevier, vol. 280(C).
    6. Liu, Chunlong & Li, Zhengqi & Jing, Xinjing & Xie, Yiquan & Zhang, Qinghua & Zong, Qiudong, 2014. "Experimental investigation into gas/particle flow in a down-fired 350 MWe supercritical utility boiler at different over-fire air ratios," Energy, Elsevier, vol. 64(C), pages 771-778.
    7. Laphirattanakul, Ponepen & Charoensuk, Jarruwat & Turakarn, Chinnapat & Kaewchompoo, Chatchalerm & Suksam, Niwat, 2020. "Development of pulverized biomass combustor with a pre-combustion chamber," Energy, Elsevier, vol. 208(C).
    8. Tavakolpour-Saleh, A.R. & Zare, Sh. & Omidvar, A., 2016. "Applying perturbation technique to analysis of a free piston Stirling engine possessing nonlinear springs," Applied Energy, Elsevier, vol. 183(C), pages 526-541.
    9. Jiangchuan Yu & Sihui Hong & Sasaki Koudai & Chaobin Dang & Shuangfeng Wang, 2023. "An Experimental Investigation on the Heat Transfer Characteristics of Pulsating Heat Pipe with Adaptive Structured Channels," Energies, MDPI, vol. 16(19), pages 1-18, October.
    10. Wang, Kai & Dubey, Swapnil & Choo, Fook Hoong & Duan, Fei, 2016. "A transient one-dimensional numerical model for kinetic Stirling engine," Applied Energy, Elsevier, vol. 183(C), pages 775-790.
    11. Nine, Md J. & Tanshen, Md. Riyad & Munkhbayar, B. & Chung, Hanshik & Jeong, Hyomin, 2014. "Analysis of pressure fluctuations to evaluate thermal performance of oscillating heat pipe," Energy, Elsevier, vol. 70(C), pages 135-142.
    12. Tavakolpour-Saleh, A.R. & Zare, SH. & Bahreman, H., 2017. "A novel active free piston Stirling engine: Modeling, development, and experiment," Applied Energy, Elsevier, vol. 199(C), pages 400-415.
    13. Fang, Neng & Li, Zhengqi & Liu, Shuxuan & Xie, Cheng & Zeng, Lingyan & Chen, Zhichao, 2021. "Experimental air/particle flow characteristics of an 80,000 Nm3/h fly ash entrained-flow gasifier with different multi-burner arrangements," Energy, Elsevier, vol. 215(PB).
    14. Fang, Neng & Li, Zhengqi & Xie, Cheng & Liu, Shuxuan & Zeng, Lingyan & Chen, Zhichao & Zhang, Bin, 2020. "The application of fly ash gasification for purifying the raw syngas in an industrial-scale entrained flow gasifier," Energy, Elsevier, vol. 195(C).
    15. Qu, Jian & Wang, Qian, 2013. "Experimental study on the thermal performance of vertical closed-loop oscillating heat pipes and correlation modeling," Applied Energy, Elsevier, vol. 112(C), pages 1154-1160.
    16. Wang, Junye, 2009. "Experimental investigation of the transient thermal performance of a bent heat pipe with grooved surface," Applied Energy, Elsevier, vol. 86(10), pages 2030-2037, October.
    17. Jouhara, H. & Chauhan, A. & Nannou, T. & Almahmoud, S. & Delpech, B. & Wrobel, L.C., 2017. "Heat pipe based systems - Advances and applications," Energy, Elsevier, vol. 128(C), pages 729-754.
    18. Chin-Hsiang Cheng & Duc-Thuan Phung, 2022. "Modeling of Thermal-Lag Engine with Validation by Experimental Data," Energies, MDPI, vol. 15(20), pages 1-17, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:130:y:2014:i:c:p:830-837. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.