IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v113y2014icp1155-1161.html
   My bibliography  Save this article

Outdoor and diurnal performance of large conformal flexible metal/plastic dye solar cells

Author

Listed:
  • Zardetto, V.
  • Mincuzzi, G.
  • De Rossi, F.
  • Di Giacomo, F.
  • Reale, A.
  • Di Carlo, A.
  • Brown, T.M.

Abstract

We carried out an investigation on the performance of a conformal curved large area, flexible, metal/plastic dye solar cells in outdoor conditions. We calculated the energy produced by the flexible cells over the course of a diurnal cycle utilizing their peculiar property of being able to be conformed to curved surfaces. The total electrical energy E produced and energy produced per unit of occupied surface (i.e. footprint) E∗ over the course of a whole day were extracted from flat cells placed facing South with a 60° tilt angle and also for cells conformal to a cylindrical curve surface. For RCURV=13.5cm an enhancement of 3.3% and 7.9% respectively for E and E∗ was observed with respect to the cell positioned flat. The enhancement in E∗ was even greater (9.1%) when RCURV=5.5cm. Mechanisms induced by curving the device and leading to this enhancement were analyzed. These results that show up to ∼10% enhancement of energy produced (per unit of occupied projected area) compared to flat devices demonstrate the attractiveness and possibilities of DSC technology for all those applications where devices handiness, flexibility and conformability are required.

Suggested Citation

  • Zardetto, V. & Mincuzzi, G. & De Rossi, F. & Di Giacomo, F. & Reale, A. & Di Carlo, A. & Brown, T.M., 2014. "Outdoor and diurnal performance of large conformal flexible metal/plastic dye solar cells," Applied Energy, Elsevier, vol. 113(C), pages 1155-1161.
    • Handle: RePEc:eee:appene:v:113:y:2014:i:c:p:1155-1161
    DOI: 10.1016/j.apenergy.2013.08.056
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261913007009
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2013.08.056?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sacco, Adriano & Rolle, Lidia & Scaltrito, Luciano & Tresso, Elena & Pirri, Candido Fabrizio, 2013. "Characterization of photovoltaic modules for low-power indoor application," Applied Energy, Elsevier, vol. 102(C), pages 1295-1302.
    2. Hashmi, Ghufran & Miettunen, Kati & Peltola, Timo & Halme, Janne & Asghar, Imran & Aitola, Kerttu & Toivola, Minna & Lund, Peter, 2011. "Review of materials and manufacturing options for large area flexible dye solar cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3717-3732.
    3. Lorenzo Dominici & Daniele Colonna & Daniele D'Ercole & Girolamo Mincuzzi & Riccardo Riccitelli & Francesco Michelotti & Thomas M. Brown & Andrea Reale & Aldo Di Carlo, 2011. "Dye Solar Cells: Basic and Photon Management Strategies," Chapters, in: Leonid A. Kosyachenko (ed.), Solar Cells - Dye-Sensitized Devices, IntechOpen.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Goe, Michele & Gaustad, Gabrielle, 2014. "Identifying critical materials for photovoltaics in the US: A multi-metric approach," Applied Energy, Elsevier, vol. 123(C), pages 387-396.
    2. De Rossi, Francesca & Pontecorvo, Tadeo & Brown, Thomas M., 2015. "Characterization of photovoltaic devices for indoor light harvesting and customization of flexible dye solar cells to deliver superior efficiency under artificial lighting," Applied Energy, Elsevier, vol. 156(C), pages 413-422.
    3. Adrian Pagan, 2007. "Weak instruments (in Russian)," Quantile, Quantile, issue 2, pages 71-81, March.
    4. Hsiao, Po-Tsung & Hung, Wan-Tun & Chen, Yu-Cheng & Huang, Liang-Kun & Chang, Chih-Chou & Chen, Ching-Fu & Chen, Hao-Wei & Lu, Ming-De & Lin, Yu-Pin & Tung, Yung-Liang, 2020. "Pilot operation and lifetime assessment for indoor light energy harvesting photovoltaics," Renewable Energy, Elsevier, vol. 152(C), pages 67-74.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Russo, Johnny & Ray, William & Litz, Marc S., 2017. "Low light illumination study on commercially available homojunction photovoltaic cells," Applied Energy, Elsevier, vol. 191(C), pages 10-21.
    2. Ng, C.H. & Lim, H.N. & Hayase, S. & Zainal, Z. & Huang, N.M., 2018. "Photovoltaic performances of mono- and mixed-halide structures for perovskite solar cell: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 248-274.
    3. Marucci, Alvaro & Cappuccini, Andrea, 2016. "Dynamic photovoltaic greenhouse: Energy efficiency in clear sky conditions," Applied Energy, Elsevier, vol. 170(C), pages 362-376.
    4. Asim, Nilofar & Sopian, Kamaruzzaman & Ahmadi, Shideh & Saeedfar, Kasra & Alghoul, M.A. & Saadatian, Omidreza & Zaidi, Saleem H., 2012. "A review on the role of materials science in solar cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 5834-5847.
    5. Cuce, Erdem & Cuce, Pinar Mert & Bali, Tulin, 2013. "An experimental analysis of illumination intensity and temperature dependency of photovoltaic cell parameters," Applied Energy, Elsevier, vol. 111(C), pages 374-382.
    6. Hug, Hubert & Bader, Michael & Mair, Peter & Glatzel, Thilo, 2014. "Biophotovoltaics: Natural pigments in dye-sensitized solar cells," Applied Energy, Elsevier, vol. 115(C), pages 216-225.
    7. De Rossi, Francesca & Pontecorvo, Tadeo & Brown, Thomas M., 2015. "Characterization of photovoltaic devices for indoor light harvesting and customization of flexible dye solar cells to deliver superior efficiency under artificial lighting," Applied Energy, Elsevier, vol. 156(C), pages 413-422.
    8. Bühler, Alexandre J. & Perin Gasparin, Fabiano & Krenzinger, Arno, 2014. "Post-processing data of measured I–V curves of photovoltaic devices," Renewable Energy, Elsevier, vol. 68(C), pages 602-610.
    9. Pérez-Alonso, J. & Pérez-García, M. & Pasamontes-Romera, M. & Callejón-Ferre, A.J., 2012. "Performance analysis and neural modelling of a greenhouse integrated photovoltaic system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 4675-4685.
    10. Abbas, Naseem & Awan, Muhammad Bilal & Amer, Mohammed & Ammar, Syed Muhammad & Sajjad, Uzair & Ali, Hafiz Muhammad & Zahra, Nida & Hussain, Muzamil & Badshah, Mohsin Ali & Jafry, Ali Turab, 2019. "Applications of nanofluids in photovoltaic thermal systems: A review of recent advances," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 536(C).
    11. Parisi, Maria Laura & Maranghi, Simone & Basosi, Riccardo, 2014. "The evolution of the dye sensitized solar cells from Grätzel prototype to up-scaled solar applications: A life cycle assessment approach," Renewable and Sustainable Energy Reviews, Elsevier, vol. 39(C), pages 124-138.
    12. Khan, Firoz & Al-Ahmed, Amir & Al-Sulaiman, Fahad A., 2021. "Critical analysis of the limitations and validity of the assumptions with the analytical methods commonly used to determine the photovoltaic cell parameters," Renewable and Sustainable Energy Reviews, Elsevier, vol. 140(C).
    13. Mozaffari, Samaneh & Nateghi, Mohammad Reza & Zarandi, Mahmood Borhani, 2017. "An overview of the Challenges in the commercialization of dye sensitized solar cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 71(C), pages 675-686.
    14. Sacco, Adriano, 2017. "Electrochemical impedance spectroscopy: Fundamentals and application in dye-sensitized solar cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 814-829.
    15. Kazuya Tada, 2022. "Characteristics of Dye-Sensitized Solar Cell under PWM Illumination: Toward Indoor Light-Energy Harvesting in the Solid-State Lighting Era," Energies, MDPI, vol. 15(24), pages 1-11, December.
    16. Ummartyotin, S. & Pechyen, C., 2016. "Strategies for development and implementation of bio-based materials as effective renewable resources of energy: A comprehensive review on adsorbent technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 654-664.
    17. Venkateswari, R. & Sreejith, S., 2019. "Factors influencing the efficiency of photovoltaic system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 101(C), pages 376-394.
    18. Popoola, Idris K. & Gondal, Mohammed A. & Qahtan, Talal F., 2018. "Recent progress in flexible perovskite solar cells: Materials, mechanical tolerance and stability," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 3127-3151.
    19. Khan, Firoz & Baek, Seong-Ho & Kim, Jae Hyun, 2014. "Intensity dependency of photovoltaic cell parameters under high illumination conditions: An analysis," Applied Energy, Elsevier, vol. 133(C), pages 356-362.
    20. Alaaeddin, M.H. & Sapuan, S.M. & Zuhri, M.Y.M. & Zainudin, E.S. & AL- Oqla, Faris M., 2019. "Photovoltaic applications: Status and manufacturing prospects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 318-332.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:113:y:2014:i:c:p:1155-1161. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.