Author
Listed:
- ROBABEH JAFARI
(Department of Materials Science and Engineering, Faculty of Engineering, Urmia University, Urmia, Iran)
- HURIEH MOHAMMADZADEH
(Department of Materials Science and Engineering, Faculty of Engineering, Urmia University, Urmia, Iran)
- ABOLFAZL GHEYSVAND
(��Department of Chemical Engineering, Arak University, Arak, Iran)
Abstract
In view of several reported cases of cracking in the piping of the fire extinguishing sector in the oil tanks, a detailed identification of the failure mechanisms was required for the safe continuation of gas processing. Therefore, this study investigated the damage of steel fire extinguishing pipes after a certain period of operation. Severe thinning of the wall thickness was observed in two parts of the pipe. Comprehensive analytical investigations, including optical microscope (OM), quantometer, XRD, FE-SEEM, EDS and microhardness were performed. In addition, the corrosion behavior of the material was investigated by polarization and EIS analysis and the most plausible reactions and corrosion mechanisms were elucidated. The corrosion products on the inside of the pipe included oxide compounds, while on the outside, it was mainly sulfides and oxides. A drastic and slight decrease in microhardness was observed near the inner and outer surfaces, respectively. Electrochemical tests proved the formation of a porous and non-protective layer of corrosion products. The corrosion resistance was found to be weak due to several factors: the nature of the AISI-1009 steel, several micropores, the periodic formation and removal of non-continuous oxide layers and the roughness that accelerated the strong thickness reduction.
Suggested Citation
Robabeh Jafari & Hurieh Mohammadzadeh & Abolfazl Gheysvand, 2024.
"An Investigation On The Causes Of Corrosion In Aisi 1009 Steel Pipe Of The Fire Line In The Gas Refinery,"
Surface Review and Letters (SRL), World Scientific Publishing Co. Pte. Ltd., vol. 31(10), pages 1-12, October.
Handle:
RePEc:wsi:srlxxx:v:31:y:2024:i:10:n:s0218625x24500835
DOI: 10.1142/S0218625X24500835
Download full text from publisher
As the access to this document is restricted, you may want to
for a different version of it.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:srlxxx:v:31:y:2024:i:10:n:s0218625x24500835. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/srl/srl.shtml .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.