Author
Listed:
- ALI KAYA GUR
(Firat University, Technology Faculty, Metallurgy and Materials Engineering Department, 23119 Elazig/Turkey)
- BUSRA ICEN
(Firat University, Technology Faculty, Metallurgy and Materials Engineering Department, 23119 Elazig/Turkey)
- SUBRAMANIAM SHANKAR
(#x2020;Department of Mechatronics Engineering, Kongu Engineering College, Erode, Indıa)
- THANGAMUTHU MOHANRAJ
(#x2021;Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore, Amrita Vishwa Vidyapeetham, Indıa)
Abstract
In this work, the surface of AISI 430 stainless steel was coated with a hyper-eutectic FeCrC and pure B4C powders using the plasma transferred arc (PTA) welding method. Further, the microstructure, microhardness, and abrasive wear resistance of the coated layer were evaluated in this work. Hard coating layers were formed between 750HV and 1000HV from the PTA melting coating process with high energy input (due to PTA). Due to the addition of FeCrC and B4C, the martensite, austenite, M7(C-B)3, M23(C-B)6, Cr(C-B), FeCr, Fe2B, Fe3C, Fe2C, SiC, and Fe3(C-B) phases were formed in the coating layer which makes the layer very hard. The abrasive wear resistance of the coated layer was evaluated using the Taguchi method with L16 mixed-level orthogonal index. Samples, wear distance (m), applied load (N), and abrasive grain size (grid) were chosen as input parameters. The mass loss due to wearing was evaluated based on “the smaller the better”. All input parameters significantly influence the wear, but the highest effect was found with the wear (slip) distance. Also, a linear regression equation was obtained to estimate the mass loss between the parameters and the levels used.
Suggested Citation
Ali Kaya Gur & Busra Icen & Subramaniam Shankar & Thangamuthu Mohanraj, 2021.
"EXAMINATION OF B4C–FeCrC COMPOSITE LAYER DURING DRY SLIDING USING STATISTICAL METHOD,"
Surface Review and Letters (SRL), World Scientific Publishing Co. Pte. Ltd., vol. 28(05), pages 1-11, May.
Handle:
RePEc:wsi:srlxxx:v:28:y:2021:i:05:n:s0218625x21500347
DOI: 10.1142/S0218625X21500347
Download full text from publisher
As the access to this document is restricted, you may want to
for a different version of it.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:srlxxx:v:28:y:2021:i:05:n:s0218625x21500347. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/srl/srl.shtml .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.