IDEAS home Printed from https://ideas.repec.org/a/wsi/srlxxx/v26y2019i02ns0218625x18501391.html
   My bibliography  Save this article

Optimization Of Turning Parameters For Surface Integrity Properties On Incoloy 800h Superalloy Using Cryogenically Treated Multi-Layer Cvd Coated Tool

Author

Listed:
  • A. PALANISAMY

    (Department of Production Engineering, National Institute of Technology, Tiruchirappalli 620015, Tamilnadu, India)

  • T. SELVARAJ

    (Department of Production Engineering, National Institute of Technology, Tiruchirappalli 620015, Tamilnadu, India)

Abstract

In this work, an attempt has been made to optimize the process parameters on turning operation of INCOLOY 800H, with the aid of cryogenically treated (24h, 12h and untreated) multi-layer chemical vapor deposition (CVD) coated tools. The influencing factors like cutting speed, feed rate, depth of cut and cryogenic treatment were selected as input parameters. Surface roughness, microhardness and material removal rate (MRR) were considered as output responses. The experimentation was planned and conducted based on Taguchi L27 standard orthogonal array (OA) with three levels and four factors. Multi-criteria decision making (MCDM) methods like grey relational analysis (GRA) and technique for order preference by similarity to ideal solution (TOPSIS) have been used to optimize the turning parameters in this work. Similar results were obtained from these MCDM techniques. Analysis of variance (ANOVA) was employed to identify the significance of the process parameters on the responses. Experimental research proved that machining performance could be improved efficiently at cutting speed is 55m/min, feed rate is 0.06mm/rev, depth of cut is 1mm and 24h cryogenically treated tool. Tool wear was analyzed for the cutting tool machined at the optimum cutting condition with the help of scanning electron microscope (SEM) and energy dispersion spectroscopy (EDS). Dry sliding wear test was also conducted for the optimal condition. The percentage improvement in machining performances is 12.70%.

Suggested Citation

  • A. Palanisamy & T. Selvaraj, 2019. "Optimization Of Turning Parameters For Surface Integrity Properties On Incoloy 800h Superalloy Using Cryogenically Treated Multi-Layer Cvd Coated Tool," Surface Review and Letters (SRL), World Scientific Publishing Co. Pte. Ltd., vol. 26(02), pages 1-16, February.
    • Handle: RePEc:wsi:srlxxx:v:26:y:2019:i:02:n:s0218625x18501391
    DOI: 10.1142/S0218625X18501391
    as

    Download full text from publisher

    File URL: http://www.worldscientific.com/doi/abs/10.1142/S0218625X18501391
    Download Restriction: Access to full text is restricted to subscribers
    File URL: https://libkey.io/10.1142/S0218625X18501391?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. P. Umamaheswarrao & D. Ranga Raju & KNS Suman & B. Ravi Sankar, 2019. "Topsis Based Optimization Of Process Parameters While Hard Turning Of Aisi 52100 Steel," Acta Mechanica Malaysia (AMM), Zibeline International Publishing, vol. 2(2), pages 28-31, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:srlxxx:v:26:y:2019:i:02:n:s0218625x18501391. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/srl/srl.shtml .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.