IDEAS home Printed from https://ideas.repec.org/a/wsi/srlxxx/v25y2018i03ns0218625x18500713.html
   My bibliography  Save this article

Corrosion Properties Of Cryorolled Aa2219 Friction Stir Welded Joints Using Different Tool Pin Profiles

Author

Listed:
  • K. KAMAL BABU

    (Department of Production Engineering, National Institute of Technology, Tiruchirappalli-620015 Tamilnadu, India)

  • K. PANNEERSELVAM

    (Department of Production Engineering, National Institute of Technology, Tiruchirappalli-620015 Tamilnadu, India)

  • P. SATHIYA

    (Department of Production Engineering, National Institute of Technology, Tiruchirappalli-620015 Tamilnadu, India)

  • A. NOORUL HAQ

    (Department of Production Engineering, National Institute of Technology, Tiruchirappalli-620015 Tamilnadu, India)

  • S. SUNDARRAJAN

    (#x2020;Former Director, National Institute of Technology, Tiruchirappalli-620015, Tamilnadu, India)

  • P. MASTANAIAH

    (#x2021;Directorate of Engineering, Defence Research and Development Laboratory, Hyderabad-500058, Telengana, India)

  • C. V. SRINIVASA MURTHY

    (#x2021;Directorate of Engineering, Defence Research and Development Laboratory, Hyderabad-500058, Telengana, India)

Abstract

The purpose of this paper is to present the corrosion behavior of the Cryorolled (CR) material and its Friction Stir Welded joints. Due to the thermal cycles of Friction Stir Welding (FSW) process, the corrosion behavior of the material gets affected. Here, the cryorolling process was carried out on AA2219 alloy and CR material was joined by FSW process using four different pin tool profiles such as cylindrical, threaded cylindrical, square and hexagonal pin. The FSW joints were analyzed by corrosion resistance with the help of potentiodynamic polarization test with 3.5% NaCl solution. From the analysis, it is found that CR AA2219 material exhibits good corrosion resistance compared to the base AA2219 material, and also a hexagonal pin profile FSW joint exhibits high corrosion resistance. Among the weld joints created by four different tools, the lowest corrosion resistance was found in the cylindrical pin tool FSW welds. Further, the corroded samples were investigated through metallurgical investigations like OM, Transmission Electron Microscopy (TEM), Energy-Dispersive X-ray Spectroscopy (EDX) and X-Ray Diffraction (XRD). It was found that the amount of dissolution of Al2Cu precipitate was present in the weld nugget. The amount of dissolution of Al2Cu precipitate is higher in the weld nugget produced by hexagonal pin tool. This is due to the enhancement of the corrosion resistance.

Suggested Citation

  • K. Kamal Babu & K. Panneerselvam & P. Sathiya & A. Noorul Haq & S. Sundarrajan & P. Mastanaiah & C. V. Srinivasa Murthy, 2018. "Corrosion Properties Of Cryorolled Aa2219 Friction Stir Welded Joints Using Different Tool Pin Profiles," Surface Review and Letters (SRL), World Scientific Publishing Co. Pte. Ltd., vol. 25(03), pages 1-15, April.
    • Handle: RePEc:wsi:srlxxx:v:25:y:2018:i:03:n:s0218625x18500713
    DOI: 10.1142/S0218625X18500713
    as

    Download full text from publisher

    File URL: http://www.worldscientific.com/doi/abs/10.1142/S0218625X18500713
    Download Restriction: Access to full text is restricted to subscribers
    File URL: https://libkey.io/10.1142/S0218625X18500713?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:srlxxx:v:25:y:2018:i:03:n:s0218625x18500713. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/srl/srl.shtml .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.