IDEAS home Printed from https://ideas.repec.org/a/wsi/srlxxx/v23y2016i03ns0218625x1650013x.html
   My bibliography  Save this article

Metallurgical And Corrosion Characterization Of Post Weld Heat Treated Duplex Stainless Steel (Uns S31803) Joints By Friction Welding Process

Author

Listed:
  • MOHAMMED ASIF M.

    (Department of Production Engineering, National Institute of Technology Tiruchirappalli, Tiruchirappalli 620015, Tamil Nadu, India)

  • KULKARNI ANUP SHRIKRISHNA

    (Department of Production Engineering, National Institute of Technology Tiruchirappalli, Tiruchirappalli 620015, Tamil Nadu, India)

  • P. SATHIYA

    (Department of Production Engineering, National Institute of Technology Tiruchirappalli, Tiruchirappalli 620015, Tamil Nadu, India)

Abstract

The present study focuses on the metallurgical and corrosion characterization of post weld heat treated duplex stainless steel joints. After friction welding, it was confirmed that there is an increase in ferrite content at weld interface due to dynamic recrystallization. This caused the weldments prone to pitting corrosion attack. Hence the post weld heat treatments were performed at three temperatures 1080∘C, 1150∘C and 1200∘C with 15min of aging time. This was followed by water and oil quenching. The volume fraction of ferrite to austenite ratio was balanced and highest pit nucleation resistance were achieved after PWHT at 1080∘C followed by water quench and at 1150∘C followed by oil quench. This had happened exactly at parameter set containing heating pressure (HP):40 heating time (HT):4 upsetting pressure (UP):80 upsetting time (UP):2 (experiment no. 5). Dual phase presence and absence of precipitates were conformed through TEM which follow Kurdjumov–Sachs relationship. PREN of ferrite was decreasing with increase in temperature and that of austenite increased. The equilibrium temperature for water quenching was around 1100∘C and that for oil quenching was around 1140∘C. The pit depths were found to be in the range of 100nm and width of 1.5–2μm.

Suggested Citation

  • Mohammed Asif M. & Kulkarni Anup Shrikrishna & P. Sathiya, 2016. "Metallurgical And Corrosion Characterization Of Post Weld Heat Treated Duplex Stainless Steel (Uns S31803) Joints By Friction Welding Process," Surface Review and Letters (SRL), World Scientific Publishing Co. Pte. Ltd., vol. 23(03), pages 1-14, June.
    • Handle: RePEc:wsi:srlxxx:v:23:y:2016:i:03:n:s0218625x1650013x
    DOI: 10.1142/S0218625X1650013X
    as

    Download full text from publisher

    File URL: http://www.worldscientific.com/doi/abs/10.1142/S0218625X1650013X
    Download Restriction: Access to full text is restricted to subscribers
    File URL: https://libkey.io/10.1142/S0218625X1650013X?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:srlxxx:v:23:y:2016:i:03:n:s0218625x1650013x. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/srl/srl.shtml .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.