Author
Listed:
- WANG XU
(School of Mechanical Engineering, Liaoning Shihua University, Fushun 113001, P. R. China)
- WANG CHENCHONG
(School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, P. R. China)
- CHEN GUOQIN
(School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, P. R. China)
- YANG WENSHU
(Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy)
- ZHANG ZHICHAO
(School of Mechanical Engineering, Liaoning Shihua University, Fushun 113001, P. R. China)
Abstract
In present work, the wetting behavior of carbon fiber andAl–Mgalloys (up to 17 wt.%) from 700°C to 1000°C was investigated by sessile drop method. Below 900°C, the contact angles decreased slightly with increase of temperature regardless ofMgamount. However, the contact angles decreased sharply at elevated temperature (above 900°C). Moreover, below 900°C, the contact angles decreased slightly with holding time, and significant decrease of contact angle with increase of holding time was found above 1000°C. All contact angle-holding time curves at 1000°C demonstrated three kinetic stages. It is observed that the contact angles decreased withMgamount regardless of wetting temperature. The addition ofMgelement will inhabit the nucleation and growth ofAl4C3phase, which is unfavorable to the wetting behavior. However, the addition ofMgelement will also decrease the surface energy, which demonstrates dominant effect and leads to the decrease of contact angles.
Suggested Citation
Wang Xu & Wang Chenchong & Chen Guoqin & Yang Wenshu & Zhang Zhichao, 2013.
"WETTING BEHAVIOR OFAl–MgALLOYS ON CARBON FIBER FABRIC,"
Surface Review and Letters (SRL), World Scientific Publishing Co. Pte. Ltd., vol. 20(03n04), pages 1-8.
Handle:
RePEc:wsi:srlxxx:v:20:y:2013:i:03n04:n:s0218625x13500364
DOI: 10.1142/S0218625X13500364
Download full text from publisher
As the access to this document is restricted, you may want to
for a different version of it.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:srlxxx:v:20:y:2013:i:03n04:n:s0218625x13500364. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/srl/srl.shtml .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.