Author
Listed:
- Yuan Ma
(Shanghai Automotive Wind Tunnel Center, Tongji University, No. 4800, Cao’an Road, Shanghai 201804, P. R. China†Shanghai Key Lab of Vehicle Aerodynamics and Vehicle Thermal Management Systems, No. 4800, Cao’an Road, Shanghai 201804, P. R. China)
- Zhigang Yang
(Shanghai Automotive Wind Tunnel Center, Tongji University, No. 4800, Cao’an Road, Shanghai 201804, P. R. China†Shanghai Key Lab of Vehicle Aerodynamics and Vehicle Thermal Management Systems, No. 4800, Cao’an Road, Shanghai 201804, P. R. China‡Beijing Aeronautical Science & Technology Research Institute, Beijing 102211, P. R. China)
Abstract
Lattice Boltzmann method (LBM) was used to simulate two-dimensional MHD Al2O3/water nanofluid flow and heat transfer in an enclosure with a semicircular wall and a triangular heating obstacle. The effects of nanoparticle volume fraction (0≤ϕ≤0.05), Rayleigh number (104≤Ra≤106), Hartmann number (0≤Ha≤60) and heating obstacle position (Cases 1–7) on flow pattern, temperature distribution and rate of heat transfer were investigated. The results show that with the enhancing Rayleigh number, the increasing nanoparticle volume fraction and the reducing Hartmann number, an enhancement in the average Nusselt number and the heat transfer appeared. The effect of Ha on the average Nu increases by increasing the Ra. It can also be found that the action of changing the heating obstacle position on the convection heat transfer is more important than that on the conduction heat transfer. The higher obstacle position in Cases 6 and 7 leads to the small value of the average Nusselt number. Moreover, the effect of Ha on average Nu in Case 1 at Ra=106 is more significant than other cases because the flow pattern in Case 1 is changed as increasing Ha.
Suggested Citation
Yuan Ma & Zhigang Yang, 2019.
"Investigation of heat transfer of MHD Al2O3/water nanofluid in an enclosure with a semicircular wall and a heating obstacle,"
International Journal of Modern Physics C (IJMPC), World Scientific Publishing Co. Pte. Ltd., vol. 30(12), pages 1-19, December.
Handle:
RePEc:wsi:ijmpcx:v:30:y:2019:i:12:n:s0129183119501055
DOI: 10.1142/S0129183119501055
Download full text from publisher
As the access to this document is restricted, you may want to
for a different version of it.
Corrections
All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wsi:ijmpcx:v:30:y:2019:i:12:n:s0129183119501055. See general information about how to correct material in RePEc.
If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.
We have no bibliographic references for this item. You can help adding them by using this form .
If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Tai Tone Lim (email available below). General contact details of provider: http://www.worldscinet.com/ijmpc/ijmpc.shtml .
Please note that corrections may take a couple of weeks to filter through
the various RePEc services.