IDEAS home Printed from https://ideas.repec.org/a/wly/greenh/v7y2017i6p1035-1049.html
   My bibliography  Save this article

Feasibility of CO2 sequestration in shallow transition zones

Author

Listed:
  • Fang Yang
  • Baojun Bai
  • Shari Dunn†Norman
  • Fen Yang
  • Ruisong Zhou

Abstract

Geological CO2 sequestration requires suitable storage sites to store CO2 at a large scale. Shallow aquifers could be a viable regional solution for stationary CO2 emitters because of their broad distribution, considerable capacity, and the potential low drilling cost associated with the shallow depths. This study introduces a shallow transition zone in which CO2 can transit from a gaseous phase into supercritical CO2 within the pressure range for CO2 injection; thus, considerable storage capacity is expected. The characteristics and major influencing factors of shallow transition zone storage were compared with those of deep storage to determine the feasibility of CO2 sequestration in shallow transition zones. The transition zone was found to provide a comparable storage capacity, greater storage efficiency, and a higher proportion of stable CO2 than a deep aquifer. The depth of this transition zone can be as shallow as 537 m for a warm basin and 656 m for a cold basin. At a depth of 600–1000 m, the primary factors affecting CO2 storage capacity are formation thickness and porosity, with reservoir heterogeneity and depth having lesser effects. Therefore, depth is of less concern when estimating CO2 storage potential. This work explored the transition zone as an effective new option when seeking means of sequestering CO2. These results not only establish parameters for CO2 sequestration in shallow aquifers, but also strengthen the current understanding of CO2 sequestration in deep aquifers. © 2017 Society of Chemical Industry and John Wiley & Sons, Ltd.

Suggested Citation

  • Fang Yang & Baojun Bai & Shari Dunn†Norman & Fen Yang & Ruisong Zhou, 2017. "Feasibility of CO2 sequestration in shallow transition zones," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 7(6), pages 1035-1049, December.
  • Handle: RePEc:wly:greenh:v:7:y:2017:i:6:p:1035-1049
    DOI: 10.1002/ghg.1696
    as

    Download full text from publisher

    File URL: https://doi.org/10.1002/ghg.1696
    Download Restriction: no

    File URL: https://libkey.io/10.1002/ghg.1696?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wly:greenh:v:7:y:2017:i:6:p:1035-1049. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    We have no bibliographic references for this item. You can help adding them by using this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: https://doi.org/10.1002/(ISSN)2152-3878 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.